PHILIPS BVP164-165 LED Flood Light Installation Guide
- June 15, 2024
- Philips
Table of Contents
PHILIPS BVP164-165 LED Flood Light
WHAT IN THE BOX
Flux (Im) Power (W)| Energy efficiency
class of light source| Beam| |
---|---|---|---|---
BVP164 LED12/830 PSU 10W SWB CE| 1100| 10| F| | 0.005| 0.24
BVP164 LED12/840 PSU 10W SWB CE| 1200| 10| E| | 0.005| 0.24
BVP164 LED12/865 PSU 10W SWB CE| 1200| 10| E| | 0.005| 0.24
BVP164 LED24/830 PSU 20W SWB CE| 2200| 20| F| | 0.008| 0.31
BVP164 LED24/840 PSU 20W SWB CE| 2400| 20| E| | 0.008| 0.31
BVP164 LED24/865 PSU 20W SWB CE| 2400| 20| E| | 0.008| 0.31
BVP164 LED36/830 PSU 30W SWB CE| 3300| 30| F| | 0.017| 0.54
BVP164 LED36/840 PSU 30W SWB CE| 3600| 30| E| | 0.017| 0.54
BVP164 LED36/865 PSU 30W SWB CE| 3600| 30| E| | 0.017| 0.54
BVP164 LED60/830 PSU 50W SWB CE| 5500| 50| F| | 0.028| 0.81
BVP164 LED60/840 PSU 50W SWB CE| 6000| 50| E| | 0.028| 0.81
BVP164 LED60/865 PSU 50W SWB CE| 6000| 50| E| | 0.028| 0.81
BVP164 LED84/830 PSU 70W SWB CE| 7700| 70| F| 100°~120°| 0.038| 1.09
BVP164 LED84/840 PSU 70W SWB CE| 8400| 70| E| | 0.038| 1.09
BVP164 LED84/865 PSU 70W SWB CE| 8400| 70| E| | 0.038| 1.09
BVP165 LED120/830 PSU 100W SWB CE| 11000| 100| F| | 0.045| 1.55
BVP165 LED120/840 PSU 100W SWB CE| 12000| 100| E| | 0.045| 1.55
BVP165 LED120/865 PSU 100W SWB CE| 12000| 100| E| | 0.045| 1.55
BVP165 LED180/830 PSU 150W SWB CE| 16500| 150| F| | 0.077| 2.51
BVP165 LED180/840 PSU 150W SWB CE| 18000| 150| E| | 0.077| 2.51
BVP165 LED180/865 PSU 150W SWB CE| 18000| 150| E| | 0.077| 2.51
BVP165 LED240/830 PSU 200W SWB CE| 22000| 200| F| | 0.112| 3.68
BVP165 LED240/840 PSU 200W SWB CE| 24000| 200| E| | 0.112| 3.68
BVP165 LED240/865 PSU 200W SWB CE| 24000| 200| E| | 0.112| 3.68
DIMENSIONS
Dimensions in mm
INSTALLATION INSTRUCTIONS
Install the luminaire according to the national regulations. 3P terminal, the terminal is at least rated voltage 250V.
- Always use IP65 or higher IP-rated junction box/connector for wiring connection.
- The Luminaire should never be used in submerged wet conditions e.g. underwater, soil, snow, etc.
- The wiring connection should also never be used in submerged wet conditions e.g. water, soil, snow, etc. OR use an IP68 junction box.
- The warranty is void, in case any of the instructions/guidelines are not followed as per the given mounting instruction.
- This product is not supplied with any junction box/connector.
WARNING
- If the luminaire is higher > 3 m, the use of 2nd fixing security system is needed.
Electrical characteristics
RECYCLING
WARNING
- The luminaire shall be installed or maintained by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced
- Luminaire must not be used or stored in corrosive environment where hazardous materials such as sulphur, chlorine, phthalates, etc. are present.
Data subject to change without notice
Keep for future reference: www.philips.com/lighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>