VRL Tondeuse Trimmer Instruction Manual

: June 9, 2024
: VRL

Table of Contents

Components
Parameters
Charging
Fixed-lenght function
- Blade removal
- Blade installation
Cutter cleaning and maintenance Notes Warranty
Notes
Warranty
Product assurances
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VRL Tondeuse Trimmer

Components

Parameters

Professional hair clipper	Motor	Operating volatge: 3V
Battery	Battery type: 800mAh

Charging time: 2h
Operating time: 2h
Charge| USB connect with adapter 5V – 1000mA
Power: 10W

Charging

Insert the charger into the tail of the clipper, connect to power to start charging.
The liquid crystal indicator lights up, indicating that it starts charging.

Note: when the power is switched on after charging, the indicator lights up to indicate that the charging head is reversed or drawn to be repalced immediately

Fixed-lenght function

To determine the length of a haircut.
To select the appropriate limit comb.

A: Features 4 lengths (1.5, 3, 6 and 9mm) adjustment to control hair length.

Mount the limit comb:

Align the limit comb with the blade edge.
Slightly forward push to mount it.

Disassemble the limit comb:

Just pull hard on the limit comb.

Blade removal

Remove the cutter head with a screwdriver.
To prevent the knife from falling, use antoher hand to hold it

Blade installation

The blade spring is aligned with spring A on the knife head B. Put in two fixed screws and hold it down.
Tighten the screw with a screwdriver to ensure the head will not fall off

Do not disassemble the knife head without any skill.

Cutter cleaning and maintenance Notes Warranty

Taper blade cleaning

Clean up the blade with the cleaning brush.

Taper blade maintenance

Maintain the blade before and after use by dripping some oil on the red points shown on the picture.

Notes

Please do not disassemble the product.
Water must not be used to wash the clipper.
Keep away from dampness while operating.
Only use a little wet cloth or neutral liquid soap to clean the product.
Never charge the product above 40 °C heat source or below 0 °C environment.
Slight heating during use or during charging is normal.
After the battery life expires, take the battery out and throw the batter away in a recycling bin. Never throw the battery in random containers.

Warranty

Product name	VRL Hair Trimmer	Warranty period
Product model	T9	Within one year since the purchase date
Purchase date	From: (M/D/Y)	To: (M/D/Y)
Customer	Add.
---	---	---
Tel.
Retailer	Add.
	Tel.

Product assurances

This product has been manufactured through the precise quality management and inspection process.
In case of any failure, the customer may send the product to the retailer.
Free service shall not be provided in either case:
A. Any damage caused by transformation that is not recognized by the manufacturer.
B. Any damage casued by mistake, inadvertent use or accident.
C. Any damage caused by natural disaster and abnormal voltage.
D. Any damage caused by non-compliance with the notes as stated in this operating manual.
This warranty card shall be the only proof of warraty.