YAESU ADMS-7 Programming Software Instruction Manual
- June 9, 2024
- YAESU
Table of Contents
YAESU ADMS-7 Programming Software
Introduction
The ADMS-7 software (Ver. 1.1 or later) can only be used with FTM-400XDR/XDE MAIN firmware version “Ver. 4.00” or later and FTM-400DR/DE MAIN firmware version “Ver. 3.00” or later.
The ADMS-7 programming software provides a convenient and efficient method of
loading data to the memory channels, and customizing the set mode items of the
FTM 400XDR/XDE/ DR/DE with a Personal Computer. Using a microSD memory card, a
personal computer may be used to edit the VFO and memory channel information,
and also to configure the Set Menu item settings. With the microSD card, the
set mode items and channel programming can then be transferred to the FTM-
400XDR/XDE/DR/DE. Also, the SCU-56/SCU-20 PC connection cable, CT-163 Data
cable may be used to connect the FTM-400XDR/XDE/DR/DE to the computer to edit
the information.
The programming can be performed comfortably on the large screen of a
computer:
- Edit the frequencies, memory names, squelch settings, repeater settings, transmit power, etc. that is related to the VFO, memory channels, preset memory channels, and the HOME channel, etc.
- Edit the Memory bank and bank link setting
- Configure the various set mode menu options on the computer monitor screen
- Use the handy editing functions, such as search, copy, move and paste
Before downloading this software, please read the “Important Notes” carefully. Downloading or installing this software will indicate that you agree with the contents of the “Important Notes”.
Important Notes
- Copyrights and all other intellectual property rights for the software, as well as the software manual, are the property of YAESU MUSEN CO., LTD.
- The revision, modification, reverse engineering, and decompiling of this software is prohibited. Redistribution, transfer, and resale of downloaded files are also prohibited.
- Do not resell the software or manuals.
- All responsibility for the use of this software lies with the customer.
- Yeosu cannot be held responsible in any way for any damages or losses, which may be incurred by the customer as a result of using this software.
To use the ADMS-7 programmer, the software application must first be installed
onto the computer.
Read this manual thoroughly and install the software.
System Requirements
In order to use this program, a personal computer (PC) with one of the following Windows operating systems, and a serial data connection cable are required.
Operating system (OS)
Microsoft Windows® 11
Microsoft Windows® 10
Microsoft Windows® 8.1
- Microsoft .NET Framework 4.0 or later must be installed on the computer in order to use the software.
If it is not installed, install Microsoft .NET Framework 4.0 or later that is provided with the ADMS-7 software.
CPU
The performance of the CPU must be able to satisfy the operating system requirements.
RAM (system memory)
The capacity of the RAM (system memory) must be more than sufficient to satisfy the operating system requirements.
HDD (Hard Disk)
The capacity of the HDD must be more than sufficient to satisfy the operating
system requirements.
In addition to the memory space required to run the operating system, about 50
MB or more of additional memory space is required to run the program.
Cables
- When using a USB port on the computer: The supplied SCU-56/SCU-20 PC connection cable
Connection Cable
| Windows ® 11| Windows ® 10|
Windows ® 8.1
---|---|---|---
SCU-56
| ✓| ✓| ✓
SCU-20
| |
✓
|
✓
NOTE: The SCU-20 can use the same driver software as the SCU-56, but the SCU-20 cannot be used with Windows 11.
- When using a COM port connection: the optional CT-163 cable
- When using the SCU-56/SCU-20 cable, be sure to install the designated driver before connecting the cable to the computer
Necessary PC peripheral interfaces
USB interface (USB Port) or Serial Port (RS-232C)
How to Confirm the FTM-400XDR/XDE/DR/DE Firmware version
-
Press and hold the [DISP] key for over one second.
The transceiver enters Set mode. -
Touch [DISPLAY].
-
Rotate the DIAL to select [11 SOFTWARE VERSION].
-
Press the [DISP] key and check the Version No. displayed.
Necessary Device
A computer that is able to read/write data from/to the microSD memory card, a computer which is equipped with a USB port* (USB1.1/USB2.0), or a computer which is equipped with an RS 232C port.
- When connecting with a USB cable, a SCU-56/SCU-20 PC connection cable is required. When using the SCU-56/SCU-20, install the designated driver on the computer.
Installation Procedure
-
Download the ADMS-7 programming software (FTM-400D_ADMS-7(DG-ID)_EXP.zip).
-
Start up the computer as an “Administrator” user.
-
Unzip the downloaded “FTM-400D_ADMS-7(DG-ID)_EXP.zip” file.
• In the unzipped “FTM-400D_ADMS-7(DG-ID)_EXP.zip” folder, you will find the “ADMS-7(DGID)” and “NET Framework” folders. -
If Microsoft .NET Framework 4.0 or later is not installed on the computer, install it before installing the ADMS-7 software.
• Run the installer for Microsoft .NET Framework 4.0 or later, that is provided in the unzipped file, and follow the instructions to install it. -
Copy the created “ADMS-7(DG-ID)” folder to the desired directory.
SCU-58/SCU-40 USB Driver Software Installation
| Do not connect the transceiver to the computer via the SCU-56/SCU-20 PC
Connection Cable until the driver installation process has been completed.
Connecting the SCU-56/SCU-20 to the computer before installation has been
completed may result in the wrong driver being installed, preventing proper
operation.
---|---
| This procedure is not necessary when exchanging data using a micro SD card.
Before using the SCU-56/SCU-20 PC connection cable, installation of the USB
driver software for the SCU-58/SCU-40 is required. Download the driver
software for the SCU-58/SCU-40 in advance.
Download the designated driver software from the Yaesu website
(https://www.yaesu.com/). Read the installation manual thoroughly and install
the driver.
Execute the ADMS-7 Programming Software
To open the ADMS-7 software, double-click “Ftm400dAdms7.exe” in the copied “ADMS 7(DG-ID)” folder
Uninstall the ADMS-7 Programming Software
Move the folder of the “ADMS-7(DG-ID)” folder to the trash box.
Copyright 2022
YAESU MUSEN CO., LTD.
All rights reserved.
No portion of this manual may be reproduced without the permission of
YAESU MUSEN CO., LTD.
Documents / Resources
|
YAESU ADMS-7 Programming
Software
[pdf] Instruction Manual
ADMS-7 Programming Software, Programming Software, ADMS-7 Software, Software,
ADMS-7
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>