THE SPY STORE GF-DC100 Smart Charger Box Installation Guide
- June 2, 2024
- THE SPY STORE
Table of Contents
Quick Installation Guide
Smart Charger Dock REV4.0
Packing List
Open the package, then make sure the Smart charger dock (device) is intact, and with all the below accessories.
Product Diagram
| Description | Introduction |
|---|---|
| Lens | Capture Videos |
| Charging interface | Charging for your mobile devices |
| Micro SD | Support Micro-SD Card Storage(up to 128G) |
| Power Cable | Supply power |
| RESET | Press and hold [RESET] for 5 seconds, |
the dev-ice will be restored to factory default setting
Indicator light
Blue LED indicator| Light off: No power
Light solid: Power on
Light blink: System running normally
---|---
Red LED indicator| Light off: Wi-Fi no connection
Light solid: Wi-Fi connected
Light blink: Waiting connect to Wi-Fi
How to Connect The Product
Please download APP before using it. Scan the QR code (Please see the blue
card) or download APP from the apple store or google play
WARNING
The use of non-original power adapter may cause instability of the devices or
WiFi disconnection. To ensure the normal operation of the equipment please use
the power adapter provided by the original manufacturer.
Preparation
Please prepare the below stuff before you use it.One smartphone or tablet PC with IOS12.0 or Android 8.0 system (higher version system is acceptable)
Wi-Fi Router
- Device can only connect to 2.4G Wi-Fi router, 5G Wi-Fi networks are not supported.
- Make sure turn on the DHCP of router, and MAC address should be off.
- Distance between the router and the device should be within 3m during configuration.
- Please don’t use special character such as Chinese, symbol to name the WiFi.
- Please don’t use special character such as Chinese, symbol as the password for the WiFi and Wi-Fi password can not be blank.
Operation Instruction
(please read, IMPORTANT!)
- Open the back cover
- Plug in
- Plug in and wait about 40 seconds, the device starts and the blue LED indicator will blink.
WARNING
Please make sure to use the adapter provided to power the device for first
time.
Download and install the app
Please read “App Card”information (must permit all accesses such as album
notification, etc.)
Do not open the app yet.(Android devices may not find the app, please see
Troubleshoot Guide Android device problems)
Go to your smartphone’s WiFi setting and turn the WiFi ON.
Turn the smartphone’s WiFi ON wait until the camera Blink-xxxx appears (Blink-xxxx.) choose it
Use the WiFi Direct PW:0123456789 and walt until it connects.
It is normal when you get a message such as:-No internet available, unsecured
network, etc.. Connect to the camera BLink anyway
(Some Android devices may not let you connect to the camera, please see the Troubleshoot Guide Android device problems)
WARNING
Sometimes the Blink-xxx is not found, please switch the WIFI button of the
mobile phone several times
Open the app, wait until the WiFi icon appears.
Then click on the + icon:
Special Statement:
We have 100% percent committed,The camera all information is only available in
the device and the cell phone of the bound user, without any third-party
storage.
The first time, please plug in the adapter.
Please set the recording mode before disconnecting WIFI router.
lf the device is not linked to the WIFE network it cannot control remote other
functions acting normally
If the Video suddenly freezes, the camera with the WIFI router stays less than
10m,or powers off the camera and WiFi router again.
If the WIFI configuration fails, please “reset”the camera and do it again after
checking the instructions.
5G WI-IF Router are not supported, Before configuring WiFi, remember to link
your phone to 2.4G 5G Wi-Fi networks are