UMAX U Smart Camera C3 User Manual
- June 2, 2024
- UMAX
Table of Contents
UMAX U Smart Camera C3
OVERVIEW
- microphone
- camera lens
- infrared LED
- light sensor
- reset button
- microSD card slot
- speaker
- micro USB power
You can place the camera on a table or use the supplied mount to place it on a ceiling. Connect the supplied power cord (micro USB 5V 1.5A).
× U-Smart × Android & iOS
- Install U-Smart application and create an account.
In the app, click the + in the upper right corner to add devices. Select U-Smart Camera C3. You can connect the camera to the application in two ways – QR code, and EZ mode. You can switch between the selected mode in the right corner. Then follow the instructions in the application.
The phone must be connected to your WiFi network and the WiFi network must be of the 2.4GHz type (5GHz networks are not supported). The password for the WiFi network must not use special characters ~ ! @ # $ % ^ & * ( ).
- A: streaming video quality settings
- B: settings
- C: video zoom
- D: enables and disables sound
- E: video stream bandwidth
- F: full screen video display
- G: creates a snapshot from the video
- H: hold to speak through camera
- I: records video
- J: other functions
scroll to see more features
- gallery of saved snapshots
- playback of stored camera recordings
- application interface appearance settings
- private mode (camera sleeps and recording is off )
- turns motion tracking on and off
- night vision settings
- turns motion detection on and off
- turns sound detection on and off
- other functions
- button settings
- turning the siren on and off
- patrol mode settings
- motion and sound detection alerts
- manual camera rotation
- setting patrol areas
- order cloud storage
- automation settings
- A: sets the name, image, and associated room of the device
- B: device information (IP address, device ID, and more)
- C: set device automations
- D: private mode (camera sleeps and recording is off)
- E: image flip and time watermark settings
- F: night vision settings
- G: sound and motion detection settings
- H: adjusts the volume and duration of the siren
- I: microSD card recording settings and card formatting
- J: order cloud storage
- K: help
- L: device sharing
- M: firmware update
- N: removes camera
- O: restarts the camera
You can watch the stream from the camera on your computer via a web browser. Open the ipc.ismartlife.me page in a web browser and in the U-Smart application scan the displayed QR code for login. On the U-Smart main page, click the + in the upper right corner, then click the icon in the upper right corner, and point the phone at the QR code displayed on the web. After scanning the QR code in the application, confirm the login. You can now watch the stream from the camera over the web.
-
manufacturer: +420 800 118 629
-
technical support: [email protected]
-
service center: Umax Czech a.s., Kolbenova 962/27e, 198 00 Praha 9, Czech Republic
-
Umax.cz
-
UMAX Czech Republic
-
UMAX Czech
CE: The importer hereby declares that this wireless device is in compliance with the essential requirements and other relevant provisions of the R&TTE Directive and Radio Equipment Directive 2014/53/EU, as applicable. A copy of the EU Declaration of Conformity is available at www.umax.cz.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local authority for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. Please contact your local or regional waste authority for more information on collection, reuse and recycling programs.
© 2021 Umax Czech a.s. All rights reserved. Umax and the Umax logo are trademarks of Umax Czech a.s. Apple and the Apple logo are trademarks of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC. All other trademarks and trade names are those of their respective owners.