ESCAM SL100 WiFi Solar PTZ Camera User Manual
- June 3, 2024
- ESCAM
Table of Contents
ESCAM SL100 WiFi Solar PTZ Camera
PRODUCTS & PACKING LIST
- 1* Hexagon spanner
- 4* Tapping screws
- 2*plastic-cap screw
- 6*Hexagon socket screw
- 1* USB charge cable
PRODUCT DIAGRAM
Installation Process
Splice two solar panels together, then fix the iron plates with special
screws under the panel, finally install the universal bracket with the
right angle Solar panel: Connect panel to camera, and fix ii with screws
in a suitable angle.
TF card and Sim card installation: Open the silicon flap and insert the TF
card and Sim card, then make sure to make sure to close the silicon flap to
avoid rain leakage.
Make sure both camera power cable and panel power cable are connected.
INSTALLATION
Intergrated installation
Separated installation
APP INSTALLATION
APP REGISTRATION
0pen the app then input your E-mail address then press ‘Register’. Check and
select to agree the agreement then your E-mail box will get an verification
code.( For better user’s experience, please allow to open all permissions to
avoid missing any notifications from the app.)
Input the “Verification code” and press ‘Next’. (if you not found the mail you
might find the code in your email spam box. )
Set the login password and confirm the login password . Then press ‘Register’
to next step.(For your password safety, the password requires more than 8
characters plus a combination of letters) Enter your E-mail address, and input
your login password. Then press ‘Login’.
WI-Fl CONNECTION
Press ‘Add Family’ then set the room or position as per reminders.
Enter your family name and then press ‘Next’.
input the necessary information just like Country, Province, then press
‘Done’.
Press ‘Add a device’ to add a smart device.
Connect the device with power supply, and make sure your mobile phone is
connected to an available Wi-Fi. Then press ‘Setup device’ 4.6 After the power
on the device, wait for the blue LED and voice prompt The device is waiting
for pairing ,Which means your device is in pairing mode.
lf you did not hear the voice prompt, please press the RESET button until the
blue indicator to lighup and then release. The device will reboot and enter
the pairing state. The app will input the Wi-Fi name automatically, please
input the correct Wi-Fi Password. Then you can choose the ‘QR code
configuration’ or ‘Sound wave configuration’ .
Sound wave configuration :Make sure camera and mobile phone within 1 M
distance, you will hear the wave sound DI Dl, follow the tips showed in the
mobile to finish configuration.
QR code configuration: Select the QR code configuration then the mobile phone
display a QR code. Use the device to scan to the QR code 10cm away from the
mobile phone.
Select the family name or device location then press ‘Done.’
The device will enter to the device list automatically. Setup success! The
device is ready to use.
DEVICE SETTING
SPECIAL NOTES!
The device is equipped with a rechargeable lithium battery. The battery
life will be affected by the device wake-up time and the number of wake-
ups. Therefore, the PIR sensor alarm detection function is used in an
environment with a lot of people. It is recommended to tum off or set the
device to low sensitivity to reduce device wake-up and call times extend
battery life.
When the battery is low, please charge the battery immediately.
Keep the device in range of your router. Make sure the device is placed close
to the Wi-Fi router.
If there has to be thick or insulated objects between the device and the Wi-Fi
router, which may lead to weak Wi-Fi signal, please make sure the Wi-Fi signal
is in good level before you start using the device.
is a deliciated device with low power consumption design. Every time the
device is awakened
and will work for few seconds. After that, the device will enter standy mode
to save power. You can set the work lime in the app settings.
Because the mainland China does not receive Google’s system push messages,
you need to open the app’s self-starting function in your phone to receive
push messages.
This device provides one month of free cloud storage services. If you need
to continue using value-added services after the trial period expires, you
need to purchase them in the app.
Documents / Resources
|
ESCAM SL100 WiFi Solar PTZ
Camera
[pdf] User Manual
SL100, WiFi Solar PTZ Camera, Solar PTZ Camera, PTZ Camera, SL100, Camera
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>