TandS B-1460-SMB, B-1460-RMB EasyInstall Hose Reel Cabinet Series Installation Guide
- June 3, 2024
- TandS
Table of Contents
T &S RELIABILITY BUILT IN”
Installation and Maintenance Instructions
Easy Install
HOSE REEL **CABINET SERIES**
B-1460-SMB, B-1460-RMB EasyInstall Hose Reel Cabinet Series
Limited One Year Warranty
(Commercial Applications)
T&S warrants to the original purchaser (other than for purposes of resale)
that such product is free from defects in material and workmanship for a
period of one (1) year from the date of purchase. During this one-year
warranty period, if the product is found to be defective, T&S shall, at its
option, repair and/or replace it. To obtain warranty service, products must be
returned to…..
T&S Brass and Bronze Works, Inc.
Attn: Warranty Repair Department
2 Saddleback Cove
Travelers Rest, SC 29690
Shipping, freight, insurance, and other transportation charges of the product
to T&S and the return of repaired or replaced product to the purchaser are the
responsibility of the purchaser. Repair and/ or replacement shall be made
within a reasonable time after receipt by T&S of the returned product. This
warranty does not cover items which have received secondary fi nishing or have
been altered or modifi ed after purchase, or for defects caused by physical
abuse to or misuse of the product, or shipment of the products.
Any express warranty not provided herein, and any remedy for Breach of
Contract which might arise, is hereby excluded and disclaimed. Any implied
warranties of merchantability or fi tness for a particular purpose are limited
to one year in duration. Under no circumstance shall T&S be liable for loss of
use or any special consequential cost, expenses or damages. Some states do not
allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. Specifi c rights under this warranty and other
rights vary from state to state. Attention California Residents:
WARNING This product can expose you to chemicals including Lead, Chromium
(hexavalent compounds) and Phthalates (DEHP) which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For
more information go to
www.P65Warnings.ca.gov.
P/N:098-020941-45
DATE:03-15-22
DRAWN: TED
CHECKED: JRM 03-24-22
APPROVED: JHB 03-25-22
EasyInstall Hose Reel Cabinet Series
Recessed Mount Cabinet Assembly
1 | SS Hose Reel System Cabinet Flange Recessed Mount | 020828-45 |
---|---|---|
2 | SS Flange Screws, 10-32 x 3/16 (qty 10) | 020840-45 |
Mount Cabinet Assembly | ||
3 | Lock Washer | 014200-45 |
4 | 0-Ring | 001065-45 |
5 | Easylnstall Kit: Nut, Bushing, 0-Ring & Lock Washer | EZ-K |
6 | 3/8″ NPT x 18″ Riser | 000369-40 |
7 | 6″ Wall Bracket | B-0109-01 |
8 | Hex Bushing, 1/2″NPT Male x 3/8″NPT Female | 001359-40 |
9 | Vacuum Breaker 1/2″NPT Female | B-0963 |
10 | Check Valve with 1/2″ NPT Adapter | 015073-40 |
11 | Hose Reel Connector Kit | ORK-SK |
12 | 3/8″ NPT x 36″ Flexible Connector Hose | HW-2B-36 |
13 | 3/8″ NPT Quick Disconnect | AW-5B |
14 | 3/8″ NPT Close Nipple | 002535-25 |
15 | Quarter-Turn Eterna w/ Spring Check, RTC (new style) | 012443-40NS |
Quarter-Turn Cerama w/ Check Valve, RTC (new style) | 012394-25NS | |
16 | 4-Arm Handle (new style) | 002521-45NS |
17 | Lab Handle Screw | 000925-45 |
18 | Escutcheon | 020839-40 |
19 | Escutcheon, Set Screw | 000939-45 |
20 | Red Button Index, Press In | 001193-19NS |
21 | White Blank Button Index | 001205-19NS |
22 | Blue Button Index, Press In | 018506-19NS |
23 | Snap-In Plug, Nickel Plated (qty 10) | 020843-45 |
STEP A:
- Remove indexes, screws, and handles from cabinet.
- Remove slip fl anges by loosening the set screw (do not remove from fl ange).
- Un-tape VR Bit from top of cabinet and unscrew the (6) door screws and remove door.
FOR RECESSED MOUNT MODELS:
- Complete rough-in so mixing valve will be 56” from fl oor.
- Punchout oval side wall tabs (2 per side).
- Use the side oval holes and screw cabinet into appropriate supports with appropriate fasteners.
- Finish assembly of 0RK-SK & hose reel.
- Connect inlet supplies and check for leaks.
- Reverse STEP A to re-assemble.
FOR SURFACE MOUNT MODELS:
- Place cabinet so mixing valve is 56” from fl oor.
- Using 6 of the 8 holes, use appropriate fasteners & washers to mount to wall. Two of the middle set of holes will be blocked depending on bottom or top inlet supplies.
- Finish assembly of 0RK-SK & hose reel.
- Connect inlet supplies and check for leaks.
- Reverse STEP A. to re-assemble.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>