LEOTER Grow Light for Indoor Plants User Manual

June 8, 2024
LEOTER

LEOTER Grow Light for Indoor Plants

Introduction

  1. Thank you for purchasing the LED Growing light produced by our company.
  2. This Manual provides guidelines and precautions for use of this product. For the best application performance of this product, please read this Manual carefully before use and keep it for further reference.
  3. The Company reserves the right to update and modify the design specifications and the contents of this Manual without prior notice.

Specification

LEOTER-Grow-Light-for-Indoor-Plants-fig-1

Overview

LEOTER-Grow-Light-for-Indoor-Plants-fig-2

Quick Guide

The LED Growing light with an adjustable timer will work automatically once the program is set. To keep the timer cycling, please do not let the power goes off. When you switch off the product or disconnect the power from the adapter while it is working, it means that the timer setting will be reset. At this point, you can reset the timer as needed.

LEOTER-Grow-Light-for-Indoor-Plants-fig-3

LCD Display

LEOTER-Grow-Light-for-Indoor-Plants-fig-4

Timer Function

Step 1: Long press the button to start setting.

Step 2: Press the button to adjust the hour, then press the button to confirm. This “hour” part can be adjusted from O to 23.

LEOTER-Grow-Light-for-Indoor-Plants-fig-8

Step 3: After finishing the hour setting, press the button to adjust the minute, then press back to standard mode. This “minute” part can be adjusted from O to 50.
Each time the is pressed, the timer will increase/decrease by 10 minutes

LEOTER-Grow-Light-for-Indoor-Plants-fig-9

Step 4: When the above settings are completed, the timer function will take effect immediately and the screen will show the time remaining before the lights are turned off.

Note:

  1. During normal operation of the timer, press the button to view the last time setting.
  2. After the lights are turned off, the LCD screen will show the time remaining until the lights are on.
  3. When you switch off the product or disconnect the power from the adapter while it is working, it means that the timer setting will be reset. At this point, you can reset the timer as needed.

Preparation Before Using

  1. Please install the product in the location you require.
  2. It is recommended to keep a distance of 30 – 45cm between the product and the plant.
  3. The recommended duration of light cultivation for plants is 8 – 12 hours per day, For better growth of your plant, please do not use the light for over 16 hours.
  4. Please make sure there is enough water for the plant to grow.

Application

  1. Flowers and plants: tulip, carnation, peony, lily, rose, etc.
  2. Vegetables: pepper, eggplant, tomato, cabbage, lettuce, etc.
  3. Various succulent plants. Also suitable for indoor gardens or indoor potted landscapes.

Precautions

  1. Do not soak the product in water and please prevent it from raining or high dust.
  2. Do not store the product with high concentrations of salt or sulfur in the air.
  3. Do not expose the product to rain, snow, fire, or any other adverse conditions.
  4. Do not subject the product to excessive physical vibration or shock.
  5. Do not touch the Led light body surface when the power is on.
  6. Do not disassemble the Product or attempt to change the internal structure.
  7. Alcohol, thinner, etc. have corrosive effects on the outer casing of the Product, especially on the LCD display. Therefore, when cleaning the Product, gently wipe it with a small amount of water.
  8. Children should be forewarned that they could not play with the product while it is working.
    Any loss resulting from a violation of the above rules will not be borne by our company.

FAQs

What is the lamp’s power consumption?****

The lamp’s power consumption is about 20W

What is the lamp’s lifespan?****

The lamp’s lifespan is about 50,000 hours.

What is the lamp’s voltage?****

The lamp’s voltage is AC85-265V.

How many lamps can be connected to one controller?****

One controller can be connected to 4 lamps. If you need more than 4 lamps, you need to buy another controller.

Does a grow light use a lot of electricity?****

The power consumption of some grow lights can be as low as 10 watts. Others could potentially draw 100 or more watts (ten times as much). your electric power costs. Kilowatt Hours (kWh) are units used to quantify electrical consumption, and often, there is a defined cost for each kWh.

At what distance are grow lights effective?****

Many growers operate under the unofficial tenet that: You require 20–40 watts of power per square foot. Low-wattage LEDs of about 200 watts should be positioned 12 to 20 inches from the plant’s top. LEDs with 1000 watts or more of power should be placed 36 to 46 inches from the plant’s top.

Can plants survive on grow lights?****

You may grow a variety of plants indoors with a set of grow lights, including houseplants, orchids, and even some fruit and vegetable crops. Due to their ability to ensure stocky, green seedlings, grow lights are perfect for seed starting. Herbs and salad greens can be cultivated under lights for a winter crop.

How often should you use a grow light for indoor plants?****

Plants should get 12 to 14 hours of daily light. Flowering plants will probably blossom earlier if the lights are left on for 16 to 18 hours each day. The best seedling growth occurs when light is provided continuously.

How much time do plants need under grow lights?****

Grow lights should be on for at least 8 to 10 hours each day in order to be successful. Depending on the situation, this can change from one to sixteen hours. Because of this, LED grow lights are very popular. It is advisable to select an energy-efficient variety when using grow lights that must be left on all day.

How do you choose a grow light for indoor plants?****

The right spectrum of light should be provided by grow lights for photosynthesis, which is essential for plant growth. Check out the offered colour spectrum before making a light purchase. The best lighting for your growing area should offer a wide spectrum. LED lights are very handy in this situation.

Can you leave plant grow lights on all night?****

Generally speaking, grow lights shouldn’t be left on all the time. For optimum growth, plants require a cycle of light and darkness. It is thought that they do, in fact, “rest” throughout the night, and that they use this time to transport nutrients to their extremities while pausing their growth.

Do plants need more water with grow lights?****

A plant need more water the more light it absorbs. Lilies and this Pink Princess Philodendron, for instance, receive a tonne of light. They therefore require a lot of water.

Video

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals