TAURUS TF-HS-600 Weight Plate Tree Instruction Manual
- June 3, 2024
- taurus
Table of Contents
Weight Plate Tree Instruction Manual
Assembly and Operating Instructions
Art. No. TF-HS-600
TF-HS-600 Weight Plate Tree
Dear customer,
Thank you for choosing a high-quality equipment of the brand Taurus®. Taurus®
offers sports and fitness equipment for the sophisticated home sport and the
equipment of fitness studios and business customers. With Taurus® fitness
equipment, the focus is on what sport is all about: maximum performance!
Therefore, the equipment is developed in close consultation with athletes and
sports scientists. Because athletes know best what makes perfect fitness
equipment. Further information can be found at www.sport-
tiedje.com.
Intended Use
The equipment may only be used for its intended purpose.
The equipment is only suitable for home use. The equipment is not suitable for
semi-professional (e.g. hospitals, associations, hotels, schools, etc.) and
commercial or professional use (e.g. fitness studios).
Legal Notice
Sport-Tiedje GmbH
Europe’s No. 1 for home fitness
International Headquarters
Flensburger Straße 55
24837 Schleswig
Germany| Management:
Christian Grau
Sebastian Campmann
Dr. Bernhard Schenkel
No. HRB 1000 SL
Local Court Flensburg
European VAT Number: DE813211547
---|---
Disclaimer
©2011 Taurus® is a registered brand of the company Sport Tiedje GmbH. All
rights reserved. Any use of this trademark without the explicit written
permission of SportTiedje is prohibited.
Product and manual are subject to change. Technical data can be changed
without advance notice.
ABOUT THIS MANUAL
Please carefully read the entire manual before installation and first use. The
manual will help you to quickly set up the system and explains how to safely
use it. Make sure that all persons exercising with the equipment (especially
children and persons with physical, sensory, mental or motor disabilities) are
informed about this manual and its contents in advance. In case of doubt,
responsible persons must supervise the use of the equipment.
Due to ongoing changes and software optimisations, the manual may have to be
updated. If you notice any discrepancies during assembly or use, please refer
to the manual uploaded to the webshop. The latest manual is always available
there.
This equipment has been manufactured according to the latest safety knowledge.
As far as possible, potential safety hazards which could cause injury have
been eliminated. Make sure to carefully follow the instructions and that all
parts are securely in place. If required, read through the instructions again
to correct any mistakes.
Please pay close attention to the safety and maintenance instructions given
here.
The contract partner cannot be held liable for damage to health, accidents or
damage to the equipment when it is not used in accordance with these
instructions.
The following safety instructions may appear in this manual:
ATTENTION
This notice indicates potentially hazardous situations which, if not avoided,
may result in property damage.
⚠ CAUTION
This notice indicates potentially hazardous situations which, if not avoided,
may result in slight or minor injuries!
⚠ WARNING
This notice indicates potentially hazardous situations which, if not avoided,
may result in death or serious injuries!
⚠ DANGER
This notice indicates potentially hazardous situations which, if not avoided,
will result in death or serious injuries!
NOTICE
This notice indicates further useful information.
Retain these instructions in a safe place for future reference, maintenance or when ordering replacement parts.
GENERAL INFORMATION
1.1 Technical Data
Weight and Dimensions
Article weight (gross, incl. packaging) approx.: | 15 kg |
---|---|
Article weight (net, without packaging) approx.: | 13 kg |
Packaging dimensions (L x W x H) approx.: | 37 cm x 84 cm x 10 cm |
Set-up dimensions (L x W x H) approx.: | 50 cm x 50 cm x 79 cm |
Length of the bars: | 18.5 cm |
Maximum load: | 300 kg |
1.2 Personal Safety
⚠ DANGER
+ Before you start using the equipment, you should consult your physician
that this type of exercise is suitable for you from a health perspective.
Particularly affected are persons who: have a hereditary disposition to high
blood pressure or heart disease, are over the age of 45, smoke, have high
cholesterol values, are overweight and/or have not exercised regularly in the
past year. If you are under medical treatment that affects your heart rate,
medical advice is absolutely essential.
+ Note that excessive training can seriously endanger your health. Please
also note that heart rate monitoring systems can be inaccurate. If you notice
any signs of weakness,
nausea, dizziness, pain, shortness of breath, or other abnormal symptoms, stop
exercising immediately and seek advice from your doctor if necessary.
⚠ WARNING
+ This equipment may not be used by children under the age of 14.
+ Children should not be allowed unsupervised access to the equipment.
+ Persons with disabilities must have a medical license and must be under
strict observation when using the equipment.
+ The equipment is strictly for use by one person at a time.
+ If your equipment provides a safety key, the clip of the safety key must be
attached to your clothing before starting your training. In the event of a
fall, the EMERGENCY STOP of the equipment can be initiated.
+ Keep your hands, feet and other body parts, hair, clothing, jewellery and
other objects well clear of moving parts.
+ During use, wear suitable sports clothing rather than loose or baggy
clothing. When wearing sports shoes, make sure they have suitable soles,
preferably made of rubber or other nonslip materials. Shoes with heels,
leathersoles, studs or spikes are unsuitable. Never exercise barefoot.
⚠ CAUTION
+ If your equipment needs to be connected to the power supply with a mains
cable, make sure that the cable is not a potential tripping hazard.
+ Make sure that nobody is within the range of motion of the equipment during
training so as not to endanger you or other persons.
ATTENTION
+ Do not insert any objects of any kind into the openings of the device.
1.3 Set-Up Place
⚠ WARNING
+ Do not place the equipment in main corridors or escape routes.
⚠ CAUTION
+ Choose a location in which to place the equipment such that there is enough
free space/clearance to the front, the rear and to the sides of the equipment.
+ The training room should be well ventilated during training and not be
exposed to any draughts.
+ Choose the place in which to set up the equipment such that there is enough
free space/clearance to the front, the rear and to the sides of the equipment.
+ The set-up and mounting surface of the equipment should be flat, loadable
and solid.
ATTENTION
+ The device may only be used in one building, in sufficiently tempered and
dry rooms (ambient temperatures between 10°C and 35°C). The equipment should
not be used
outdoors or in rooms with high humidity (over 70%) like swimming pools.
+ A floor protective mat/equipment underlay can help to protect high-quality
floor coverings (parquet, laminate, cork, carpets) from dents and sweat and
can help to level out slight unevenness.
2.1 General Instructions
⚠ DANGER
+ Do not leave any tools, packaging materials such as foils or small parts
lying around, as otherwise there is a danger of suffocation for children. Keep
children away from the
equipment during assembly.
⚠ WARNING
+ Pay attention to the instructions attached to the equipment in order to
reduce the risk of injuries.
⚠ CAUTION
+ Ensure to have sufficient room for movement in each direction during
assembly.
+ The assembly of the equipment must be carried out by at least two adults.
If in doubt, seek the help of a third technically skilled person.
ATTENTION
+ To prevent damage to the equipment and the floor, assemble the equipment on
a mat or packaging board.
NOTICE
+ In order to make the assembly as simple as possible, some screws and nuts
to be used can already be pre-assembled.
+ Ideally, assemble the equipment at its later set-up place.
2.2 Scope of Delivery
The scope of delivery consist of the following parts. At the beginning, check
whether all parts and tools belonging to the device are included in the scope
of delivery and whether damage has occurred. In the event of complaints, the
contractual partner must be contacted directly.
⚠ CAUTION
If parts of the scope of delivery are missing or damaged, the assembly must
not be carried out.
NUMBE | DESCRIPTION | QUANTITY | |
---|---|---|---|
1 | SMALL JOINT PLATE | 1 | |
2 | LARGE JOINT PLATE | 1 | |
3 | SUPPORT | 3 | |
4 | PLATE BAR | 6 | |
5 | ELLIPTIC CAP | 3 | |
6 | RUBBER DONUT | 6 | |
7 | ROUND CAP | 6 | |
8 | WASHER | 6 | |
9 | RUBBER PAD | 3 |
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and
carry out the assembly in the order given.
NOTICE
+ First loosely screw all parts together and check that they fit properly.
Tighten the screws using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open
and/or download the PDF instructions stored in the webshop on your end device
(e.g. smartphone, tablet or PC). There you have the option of zooming in
closer. Please note that the Adobe Acrobat Reader programme must be installed
on your end device in order to open the file.
Step 1: Assembly of the Weight Plate Tree
- Attach one elliptic cap (5) and one rubber pad (10) to each of the supports (3).
- Fix the large and small joint plate (1 & 2) to the supports (3) along with six plate bars (4) with a total of six bolts (8) and six washers (9).
- Slide one rubber donut (6) onto each of the plate bars (4).
STORAGE AND TRANSPORT
3.1 General Instructions
⚠ WARNING
+ The storage location should be chosen so that improper use by third parties
or children can be prevented.
+ If your equipment does not have transportation wheels, the equipment must
be disassembled before transportation.
ATTENTION
+ Make sure that the equipment is protected from moisture, dust and dirt in
the selected storage location. The storage location should be dry and well
ventilated and have a constant ambient temperature between 10°C and 35°C.
TROUBLESHOOTING, CARE AND MAINTENANCE
4.1 General Instructions
⚠ WARNING
+ Do not make any improper changes to the equipment.
⚠ CAUTION
+ Damaged or worn components may affect your safety and the life of the
equipment.
Therefore, immediately replace damaged or worn components. In such a case,
contact the contract partner. The equipment must not be used until it has been
repaired. If necessary, use only original spare parts.
ATTENTION
+ In addition to the instructions and recommendations for maintenance and
care given here, additional service and/or repair work may be necessary; this
must only be carried out by authorised service technicians.
4.2 Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production.
Nevertheless, faults or malfunctions may occur. Frequently, individual parts
are responsible for these disturbances, an exchange is usually sufficient.
Please refer to the following overview for the most common errors and how to
correct them. If the equipment still does not function properly, contact your
contract partner.
Fault | Cause | Solution |
---|---|---|
Squeaking & cracking noises | Screw connections loosened or too tight | + Check |
or lubricate screw connections
Unit wobbles| + Uneven ground
+ Loose screw connections| + Align unit
+ Tighten screw connections
4.3 Maintenance and Inspection Calendar
To avoid damage from body sweat, the equipment must be cleaned with a damp
towel (no solvents!) after each training session.
The following routine tasks must be performed at the specified intervals:
Part | Weekly | Monthly | Quarterly |
---|---|---|---|
Screw connections | I |
Legend: C = clean; I = inspect
DISPOSAL
At the end of its operational life, this equipment cannot be disposed of in
normal household waste.
Instead, it must be disposed of via an recycling centre. Further information
can be obtained from your local authority‘s recycling service.
The materials can be recycled as per their symbols. Through the reuse,
recycling of materials or other forms of recovery of old equipment, you make
an important contribution to the protection of the environment.
RECOMMENDED ACCESSORIES
To make your training experience even more efficient and pleasant, we
recommend that you add suiting accessories to your fitness equipment. This
could be a floor mat, for example, which makes your fitness equipment stand
more securely and also protects the floor from falling sweat, but it could
also be additional handrails on some treadmills or silicone spray to keep
moving parts in good shape.
If you have purchased a fitness machine with pulse training and want to train
your heart rate, we strongly recommend that you use a compatible chest strap,
as this ensures optimum transmission of the heart rate. You may want to buy
additional grips or weights for multi gyms.https://www.sport-tiedje.co.uk
/taurus-weight-plate-tree-tf-hs-600
Our range of accessories offers the highest quality and makes training even
better.
If you would like to find out more about compatible accessories, please go to
the detail page of the product in our webshop (the easiest way is to enter the
article number in the search field above) and go to the recommended
accessories on this page. Alternatively, you can use the QR code provided.
Of course, you can also contact our customer service: by telephone, e-mail, in
one of our branches or via our social media channels. We will be happy to
advise you!
ORDERING SPARE PARTS
7.1 Serial Number and Model Name
In order to provide you with the best possible service, please have the model
name, article number, serial number, exploded drawing and parts list ready.
The corresponding contact options can be found in chapter 9 of this operating
manual.
NOTICE
The serial number of your equipment is unique. It’s located on a white
sticker.
Enter the serial number in the appropriate field.
Serial number:
Brand / Category: Taurus / strength training
Model Name: Weight Plate Tree
Article Number: TF-HS-600
7.2 Parts List
No. | Name | Qty. |
---|---|---|
1 | Large joint plate | 1 |
2 | small joint plate | 1 |
3 | support | 3 |
4 | plate bar | 6 |
5 | elliptic cap | 3 |
6 | rubber donut | 6 |
7 | round cap | 6 |
8 | bolt m10*25 | 6 |
9 | washer | 6 |
10 | rubber pad | 3 |
7.3 Exploded Drawing
WARRANTY
Training equipment from Taurus® is subject to strict quality control. However,
if a fitness equipment purchased from us does not work perfectly, we take it
very seriously and ask you to contact our customer service as indicated. We
are happy to help you by phone via our service hotline.
Error Descriptions
Your fitness equipment is developed for long-term, high-quality training.
However, should a problem arise, please first read the operating instructions.
For further assistance, please contact your contract partner or call our
service hotline. To ensure your problem is solved as quickly as possible,
please describe the defect as exactly as possible.
In addition to the statutory warranty, we provide a warranty for every fitness
equipment purchased from us according to the following provisions.
Your statutory rights are not affected.
Warrantee
The warrantee is the first/original buyer and/or any person who received a
newly purchased product as a gift from the original buyer.
Warranty period
The warranty periods, s hown on our web shop, begin on delivery of the
fitness equipment. The respective warranty periods for your equipment can be
found on its product website.
Repair Costs
According to our choice, there will either be a repair, a replacement of
individual damaged parts or a complete replacement. Spare parts, that have to
be mounted while assembling the equipment, have to be replaced by the
warrantee personally and are not a part of repair. After the expiration of the
warranty period for repair costs, a pure parts warranty applies, which does
not include the repair, installation and delivery costs.
The terms of use are defined as follows:
+ Home use: solely for private use in private households up to 3 hours per
day
+ Semi-professional use: up to 6 hours per day (e. g. rehabilitation centres,
hotels, clubs, company gyms)
+ Professional use: more than 6 hours per day (e. g. commercial gyms)
Warranty Service
Within the warranty period, equipment which develops faults as a result of
material or manufacturing defects, will be repaired or replaced at our
discretion. Ownership of equipment or parts of equipment which have been
replaced is transferred to us. The warranty period is not extended nor does a
new warranty period begin following repair or replacement under the warranty.
Warranty Conditions
For the warranty to be valid, the following steps must be taken:
Please contact our customer service by email or phone. If the product under
warranty has to be sent in for repair, the seller bears costs. After expiry of
the warranty, the buyer bears the costs of transport and insurance. If the
fault is covered by our warranty, you will receive a new or repaired equipment
in return.
Warranty claims are invalid in case of damage resulting from:
+ misuse or improper handling
+ environmental influences (moisture, heat, electrical surge, dust, etc.)
+ failure to follow the current safety measures for the equipment
+ failure to follow the operating instructions
+ use of force (e. g. hitting, kicking, falling)
+ interventions which were not carried out by one of our authorized service
centres
+ unauthorised repair attempts
Proof of Purchase and Serial Number
Please make sure that you are able to provide the appropriate receipt when
claiming on your warranty. So that we can clearly identify the model of your
equipment, and for the purposes of our quality control, you will need to give
the serial number of your equipment, when contacting the service team. Where
possible please have your serial number and your customer number ready when
you call our service hotline. It will help us to deal with your request
swiftly.
If you cannot find the serial number on your fitness equipment, our service
team is at your disposal to offer further information.
Service outside of the Warranty Period
We are also happy to issue an individual cost estimate if there is a problem
with your fitness equipment after the warranty has expired, or in cases which
do not fall under the terms of the warranty, e. g. normal wear and tear.
Please contact our customer service team to find a quick and cost-effective
solution to your problem. In such a case you will be responsible for the
delivery costs.
Communication
Many problems can be solved just by speaking to us as your specialist
supplier. We know how important it is to you as a user of the fitness
equipment to have problems solved quickly and simply, so you can enjoy working
out with minimal interruption. For that reason, we also want to resolve your
queries quickly and in a straightforward manner. Thus, please always keep your
customer number and the serial number of the faulty equipment handy.
TECHNICAL SUPPORT
+44 141 876 3986
support@powerhousefitness.co.uk
SERVICE
+44 141 876 3972
Mo – Fr 9am – 5pm
Please find a detailed overview including address and opening hours for all
stores of the Sport-Tiedje
Group in Germany and abroad on the following website: www.sport-
tiedje.com/en/stores
WE LIVE FITNESS
WEBSHOP AND SOCIAL MEDIA
Sport-Tiedje is Europe’s largest specialist store for home fitness equipment
with currently over 70 stores and one of the world’s most renowned online mail
order companies for fitness equipment. Private customers order via the 25 web
shops in the respective national language or have their desired equpiment
assembled on site. In addition, the company supplies fitness studios, hotels,
sports clubs, companies and physio practices with professional equipment for
endurance and strength training.
Sport-Tiedje offers a wide range of fitness equipment from renowned
manufacturers, high-quality in-house developments and comprehensive services,
such as a build-up service and sports scientific advice before and after the
purchase. The company employs numerous sports scientists, fitness trainers and
competitive athletes.
Visit us also on our social media platforms or our blog!
www.sport-tiedje.co.uk
www.sport-tiedje.de/blog
www.facebook.com/SportTiedje
www.instagram.com/sporttiedje
www.youtube.com/user/sporttiedje
References
- Fitnessgeräte kaufen bei Fitshop.at - Europas Nr.1 für Heimfitness
- Køb træningsudstyr hos Fitshop - Europas nr. 1 inden for hjemmefitness
- tiedje.de has been registered
- Login • Instagram
- Purchase fitness equipment at Sport-Tiedje - Europe's No. 1 for home fitness
- Fitnessgeräte kaufen bei Sport-Tiedje - Europas Nr. 1 für Heimfitness
- Sport-Tiedje - Das Fitness Blog
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>