HASWING 50806 Trolling Motor Instruction Manual
- June 3, 2024
- HASWING
Table of Contents
HASWING 50806 Trolling Motor
Mounting the motor
Ensure that the battery is not or when mounting the motor using the Quick Release Bracket. If not using the motor for an extended period or when storing the vessel, disconnect the battery.
Installation method
The motor can be bolted directly to the boat OR if using the Quick Release
Bracket, bolt the puck to the boat. It is recommended to mount the motor so it
is longitudinal with the boat or on a slight angle. This will also depend on
whether your boat has an electric motor mounting plate. (Fig.4)
Battery connection
Only use a deep cycle battery of the correct voltage for the motor. Lead acid
technology and lithium technology batteries are both suitable. Incorrect
battery voltage or connection could damage the motor’s electronics. Connect
the battery(+) to the positive (red) terminal, and (-) to the negative (black)
terminal. The ring connector should always be in the bottommost location with
any washer sitting above the ring connector and then the
nut.
Always make sure that the battery or batteries are secured and free from contact with metal objects to prevent shorting out. A battery box is recommended. Lead acid technology batteries such as AGM may require ventilation. Always disconnect the motor from the battery when recharging the battery. Failure to do so could damage the motor’s electronics. Cayman B / with GPS