AORUS S Model Gaming Desktop PC User Manual
- June 8, 2024
- Aorus
Table of Contents
S Model Gaming Desktop PC
User Manual AORUS MODEL S
GAMING DESKTOP PC
(AMSI7N7I-21A1)
User’s Manual
Rev. 1001
S Model Gaming Desktop PC
https://www.gigabyte.com/Desktop-PC/AORUS-MODEL-S-Intel-12th?m=ma#kf
For more product details, please visit GIGABYTE’s website. To reduce the
impacts on global warming, the packaging materials of this product are
recyclable and reusable.
GIGABYTE works with you to protect the environment.
Copyright
© 2022 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their
respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property
of GIGABYTE.
Changes to the specifications and features in this manual may be made by
GIGABYTE without prior notice. No part of this manual may be reproduced,
copied, translated, transmitted, or published in any form or by any means
without GIGABYTE’s prior written permission.
Documentation Classifications
In order to assist in the use of this product, GIGABYTE provides the following
types of documentations:
- For quick set-up of the product, read the Quick Start Guide included with the product.
- For detailed product information, carefully read the User’s Manual.
For product-related information, check on our website at: https://www.gigabyte.com
Box Contents
AORUS MODEL S GAMING DESKTOP PC
Quick Start Guide
Antennas
Power cord
The box contents above are for reference only and the actual items shall
depend on the product package you obtain. The box contents are subject to
change without notice.
Chapter 1 Hardware Installation
1-1 Safety Information
- Before connecting to the power outlet, make sure that the voltage rating of the power cable is compatible with the power specification in the country where you are located.
- The power cord plug must be connected to a properly wired and grounded power outlet.
- Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.
- Do not touch the plug with wet hands, otherwise easily cause electric shock.
- Protect the power cord from being tread upon or pinched, particularly at the plug.
- To avoid damage of internal component, do not place the product on a vibrating surface.
- Operating temperature: 5~35oC.
- Do not place the product near any heat sources such as electric radiators, heat registers, stoves or other devices (including amplifiers) that produce heat.
- Do not place the product in a confined space; make sure to use it in a well-ventilated place.
- The holes or openings on this product are for ventilation to ensure reliable operation of the product and to protect it from overheating. Do not cover or block the ventilation holes with any objects.
- Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.
- Do not use this product near water, drinks, or all types of liquids. Do not expose this apparatus to rain, liquid or moisture. Failure to do so may result in electric shock or damage. This product is not water proof or oil-proof.
- Clean the equipment with a soft, dry cloth.
- The manufacturer specifies that the thumbscrews normally should be tightened with a screwdriver, use of thumbscrews is not considered to compromise the basic principles of safety associated with the Safety Standard.
- Warning! Danger of explosion if the battery is replaced with an incorrect model. Refer to the manufacturer’s instruction manual to handle the used battery.
- Do not remove the casing of this product to avoid causing safety issues. Do not make mechanical or electrical modifications to the equipment to avoid causing safety issues.
1-2 Hardware Information
System Overview
a Power Button
The power button allows users to turn on/off the computer.
b USB 3.2 Gen 1 Port
The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specification and is
compatible to the USB 2.0 specification. The maximum power output is 5V. Use
this port for USB devices.
c Audio/Microphone Jack
The line out/mic in jack.
d USB Type-C® Port
The reversible USB port supports the USB 3.2 Gen 2 specification and is
compatible to the USB 3.2 Gen 1 and USB 2.0 specification. The maximum power
output is 5V. Use this port for USB devices.
a DisplayPort (Note 1)
DisplayPort delivers high quality digital imaging and audio, supporting bi-
directional audio transmission.
DisplayPort can support HDCP 2.3 content protection mechanisms. You can use
this port to connect your DisplayPort-supported monitor. Note: The DisplayPort
Technology can support a maximum resolution of 5120×2160@60 Hz but the actual
resolutions supporte
b HDMI Port
The HDMI port supports HDCP 2.3 and Dolby TrueHD and DTS HD Master Audio
formats. It also supports up to 192KHz/24bit 7.1-channel LPCM audio output.
You can use this port to connect your HDMI-supported monitor. The maximum
supported resolution is 4096×2160@60 Hz, but the actual resolutions supported
are dependent on the monitor being used.
After installing the DisplayPort/HDMI device, make sure to set the default
sound playback device to DisplayPort/HDMI. (The item name may differ depending
on your operating system.)
c USB 3.2 Gen 1 Port
The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specification and is
compatible to the USB 2.0 specification. Use this port for USB devices.
d USB 2.0/1.1 Port
The USB port supports the USB 2.0/1.1 specification. Use this port for USB
devices.
e USB 3.2 Gen 2 Type-A Port (Q-Flash Plus Port)
The USB 3.2 Gen 2 port supports the USB 3.2 Gen 2 specification and is
compatible to the USB 3.2 Gen 1 and USB 2.0 specification. Use this port for
USB devices. Before using Q-Flash Plus (Note 2) , make sure to insert the USB
flash drive into this port first.
f USB Type-C® Port
The reversible USB port supports the USB 3.2 Gen 2×2 specification and is
compatible to the USB 3.2 Gen 2, USB 3.2 Gen 1, and USB 2.0 specifications.
Use this port for USB devices.
g RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 2.5 Gbps
data rate. The following describes the states of the LAN port LEDs. Speed
LED:
| State | Description |
|---|---|
| Green | 2.5 Gbps data rate |
| Orange | 1 Gbps data rate |
| Off | 100 Mbps data rate |
Activity LED:
| State | Description |
|---|---|
| Blinking | Data transmission or receiving is occurring |
| On | No data transmission or receiving is occurring |
h USB 3.2 Gen 2 Type-A Port (Red)
The USB 3.2 Gen 2 port supports the USB 3.2 Gen 2 specification and is
compatible to the USB 3.2 Gen 1 and USB 2.0 specification. Use this port for
USB devices.
i Q-Flash Plus Button (Note 2)
Q-Flash Plus allows you to update the BIOS when your system is off (S5
shutdown state). Save the latest BIOS on a USB thumb drive and plug it into
the dedicated port, and then you can now flash the BIOS automatically by
simply pressing the Q-Flash Plus button. The QFLED will flash when the BIOS
matching and flashing activities start and will stop flashing when the main
BIOS flashing is complete.
j SMA Antenna Connectors (2T2R)
Use this connector to connect an antenna.
Tighten the antennas to the antenna connectors and then aim the antennas
correctly for better signal reception.
k Line Out
The line out jack. For better sound quality, it is recommended that you
connect your headphone/speaker to this jack (actual effects may vary by the
device being used).
l Mic In
The Mic in jack.
(Note 1) The DisplayPort does not support HDMI connection by adapter.
(Note 2) To enable Q-Flash Plus function, refer to Chapter 3.
- When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard.
- When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector.
https://www.gigabyte.com/WebPage/699/realtek4080-audio.html
Please visit GIGABYTE’s website for details on configuring the audio
software.
a
DisplayPort
The connector supports DisplayPort 1.4a version.
b HDMI Port
The connector supports HDMI 2.1 version.
We recommend that you connect the monitor cable to the graphics card.
1-3 Getting Started
This product is designed and intended to be used in vertical position only.
Connecting Peripheral Devices
Connect your peripheral devices such as keyboard, mouse, monitor, and etc. to
the desktop computer. 
We recommend that you connect the monitor cable to the graphics card.
Connecting the Power Cord
Connect the included power cord to the desktop computer and a power
outlet.
Turning
on
Press the power button to turn on the desktop computer.
It is recommended that the product be used in an open and well-ventilated
area; keep a distance of at least 10 cm around the product for ventilation to
ensure proper system operation. 
Chapter 2 BIOS Setup
2-1 Entering the BIOS Setup
To access the BIOS Setup program, press the
Startup Screen
The following startup Logo screen will appear when the computer boots.
Function Keys:
< DEL>: BIOS SETUP\Q-FLASH
Press the
< F12>: BOOT MENU
Boot Menu allows you to set the first boot device without entering BIOS Setup.
In Boot Menu, use the up arrow key
The system will boot from the device immediately.
Note: The setting in Boot Menu is effective for one time only. After system
restart, the device boot order will still be based on BIOS Setup settings.
< END>: Q-FLASH
Press the
- Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction.
- It is recommended that you not alter the default settings (unless you need to) to prevent system instability or other unexpected results. Inadequately altering the settings may result in system’s failure to boot. If this occurs, try to clear the CMOS values and reset the board to default values. (Refer to the “Load Optimized Defaults” section for how to clear the CMOS values.)
2-2 Setting the BIOS Display Language
To set the BIOS display language, go to the System Info.
menu. The BIOS Language setting allows you to select the default language used
by the BIOS.
2-3 Setting Administrator/User Password Go to the Boot menu to set the administrator
password or user password for your desktop computer.
Administrator Password
Allows you to configure an administrator password. Presson this item, type the password, and then press . You will be requested to confirm the password. Type the password again and press . You must enter the administrator password (or user password) at system startup and when entering BIOS Setup. Differing from the user password, the administrator password allows you to make changes to all BIOS settings.
User Password
Allows you to configure a user password. Presson this item, type the password, and then press . You will be requested to confirm the password. Type the password again and press . You must enter the administrator password (or user password) at system startup and when entering BIOS Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.
To cancel the password, presson the password item and when requested for the password, enter the correct one first. When prompted for a new password, press without entering any password. Press again when prompted to confirm.
NOTE: Before setting the User Password, be sure to set the Administrator Password first.
2-4 Loading Optimized Defaults
Go to the Save & Exit menu to load the BIOS default
settings.
Load Optimized Defaults
Presson this item and select Yes to load the optimal BIOS default settings. The BIOS defaults settings help the system to operate in optimum state. Always load the Optimized defaults after updating the BIOS or after clearing the CMOS values.
2-5 Saving the BIOS Settings and Exiting
Save & Exit Setup
Press
Exit Without Saving
Press
Boot Override
Allows you to select a device to boot immediately. Press
Chapter 3 Appendix
Using Q-Flash Plus
A. Before You Begin:
- From GIGABYTE’s website, download the latest compressed BIOS update file that matches your product model.
- Uncompress the downloaded BIOS file, save it to your USB flash drive, and rename it to GIGABYTE.bin. (Note: The USB flash drive must use FAT32/16/12 file system.)
- Please turn on the power supply before connecting the USB flash drive to the Q-Flash Plus port on the back panel.
B. Using Q-Flash Plus
Press the Q-Flash Plus button and the system will automatically search and
match the BIOS file in the USB flash drive on the Q-Flash Plus port. The QFLED
and the Q-Flash Plus button on the rear panel will flash during the BIOS
matching and flashing process. Wait for 6-8 minutes and the LEDs will stop
flashing when the BIOS flashing is complete. If you choose to update the BIOS manually, first make sure that your system is off (S5 shutdown state).
Regulatory Notices
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Product Name: GIGABYTE DESKTOP PC
Trade Name: GIGABYTE
Model Number: AMSI7N7I-21A1
European Union (EU) CE Declaration of Conformity
This device complies with the following directives: Electromagnetic
Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/EU, Radio
Equipment Directive 2014/53/EU, ErP Directive 2009/125/EC, RoHS directive
(recast) 2011/65/EU & the 2015/863 Statement. This product has been tested and
found to comply with all essential requirements of the Directives.
European Union (EU) RoHS (recast) Directive 2011/65/EU & the European
Commission Delegated Directive (EU) 2015/863 Statement
GIGABYTE products have not intended to add and safe from hazardous substances
(Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP). The parts and
components have been carefully selected to meet RoHS requirement. Moreover, we
at GIGABYTE are continuing our efforts to develop products that do not use
internationally banned toxic chemicals.
European Union (EU) Community Waste Electrical & Electronic Equipment
(WEEE) Directive Statement
GIGABYTE will fulfill the national laws as interpreted from the 2012/19/EU
WEEE (Waste Electrical and Electronic Equipment) (recast) directive. The WEEE
Directive specifies the treatment, collection, recycling and disposal of
electric and electronic devices and their components. Under the Directive,
used equipment must be marked,
collected separately, and disposed of properly.
WEEE Symbol Statement
The symbol shown below is on the product or on its packaging, which indicates
that this product must not be disposed of with other waste. Instead, the
device should be taken to the waste collection centers for activation of the
treatment, collection, recycling and disposal procedure.
For more information about where you can drop off your waste equipment for
recycling, please contact your local government office, your household waste
disposal service or where you purchased the product for details of
environmentally safe recycling.
End of Life Directives-Recycling
** The symbol shown below is on the product or on its packaging, which
indicates that this product must not be disposed of with other waste. Instead,
the device should be taken to the waste collection centers for activation of
the treatment, collection, recycling and disposal procedure
EU contact point:
GIGABYTE TECHNOLOGY Trading GmbH
Am Stadtrand 63, 22047 Hamburg, Germany
Tel: +49-40-25 33 040
UK contact point:
GBT TECH. CO. LTD
13 Warren Yard, Wolverton Mill, Milton
Keynes MK12 5NW, United Kingdom
Tel: +44 (0)1908 322878
European Community Radio Equipment Directive Compliance Statement:
** This equipment complies with all the requirements and other relevant
provisions of Radio Equipment Directive 2014/53/EU.
This equipment is suitable for home and office use in all the European
Community Member States and EFTA Member States.
The low band5.15 -5.35 GHz is for indoor use only.
| AT| BE| BG| HR| CY| CZ| DK
---|---|---|---|---|---|---|---
EE| Fl| FR| DE| EL| HU| IE
IT| LV| LT| LU| MT| NL| PL
PT| RO| SK| SI| ES| SE| UK
Wireless module manufacturer: Intel® Corporation SAS
Wireless module model name: KILLER1650I (AX201)
Korea KCC NCC Wireless Statement:
5,25GHz – 5,35 GHz
Korea EMC Warning Statement:
This device is suitable for use in a business environment and is suitable
for use in a home environment
There are concerns.
Japan Wireless Statement:
5.15 GHz ~ 5.35 GHz : Indoor use only.
Wireless module country approvals:
Wireless module manufacturer: Intel® Corporation
Wireless module model name: KILLER1650I (AX201)
Contact Us
GIGA-BYTE TECHNOLOGY CO., LTD.
Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan
TEL: +886-2-8912-4000, FAX: +886-2-8912-4005
Tech. and Non-Tech. Support (Sales/Marketing) :
https://esupport.gigabyte.com
WEB address (English): https://www.gigabyte.com
WEB address (Chinese): https://www.gigabyte.com/tw
GIGABYTE eSupport
To submit a technical or non-technical (Sales/Marketing) question, please link
to: https://esupport.gigabyte.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>