ALDI FERREX 706768 20V Li-Ion Air Pump User Manual

ALDI FERREX 706768 20V Li-Ion Air Pump User Manual

Product Info

Read all safety warnings and all instructions thoroughly before operating this product.
Ensure you keep your manual in a safe place for future reference.

QR codes

QR codes take you where you want to go quicky and easily

Whether you require product information, spare parts or accessories, details on warranties or after sales service, or if you want to watch a product demonstration video, our QR codes will take you there in no time at all.

What is a QR code?

A QR-code (QR=Quick Response) is a type of matrix that can be read with a smartphone camera and that contains a link to a website or contact details, for example.
Advantage: You are not required to manually enter a website address or contact details.

How it works

To scan the QR code, all you need is a smartphone with QR codes reader software and an Internet connection*. This type of software can be downloaded for free from your smartphone’s app store.

Try it out now

Just scan the QR code with your smartphone and find out more about the Aldi product you have purchased*.

Warranty details

REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product- registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION.

The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the date of purchase. Defects that occur  within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.

Our goods come with guarantees that cannot be excluded under the  Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Pack contents / parts

Congratulations on the purchase of your FERREX® 20 V Li-ion Air Pump. When you open your packaging, first remove all items and check there are no parts damaged or missing. If you find anything wrong, do not operate the product until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

Intended use of the 20 V Li-ion Air Pump

NOTE: This product is for private domestic DIY use only.
It is not suitable for commercial, industrial or trade use.
Use the 20 V Li-ion Air Pump only for intended applications including inflation of tyres, sports balls, camping equipment, inflatable pool toys and other similar items.

This user manual contains important information on how to use the 20 V Li-ion Air Pump. Read this user manual carefully, in particular the safety instructions, before using the product. Failure to follow this user manual may lead to severe injuries or product damage. Keep this user manual for further reference.

IMPORTANT INFORMATION.

NOTE: First time users or inexperienced operators pay particular attention to the operation of the 20 V Li-ion Air Pump, including details of starting and stopping and correct use of the 20 V Li-ion Air Pump on pages 12-15, as well as the maintenance instructions on page 16.

Contents of carton

• 1 x 20 V Li-ion Air Pump
• 1 x Air hose (50 cm)
• 1 x Ball adaptor
• 1 x Tapered adaptor
• 1 x Presta tyre valve adaptor
• 1 x Instruction manual
• 1 x Warranty card

Description of symbols

The instruction manual or rating plate on your product may show symbols.
These represent important information about the product or instructions on its use.

Read the instructions
Warning
Wear ear protection
Wear eye protection
Conforms to relevant standards for electrical safety and electromagnetic compatibility.
60 Months Warranty Period.
The box is recyclable at the kerbside.

General safety instructions

WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool.
   Distractions can cause you to lose control.

Electrical safety

1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
5. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

2. Use personal protective equipment. Always wear eye protection.
   Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

3. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

4. Remove any adjusting key or wrench before turning the power tool on.
   A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

5. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards.

8. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power tool use and care

1. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

2. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

3. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

4. Store idle power tools out of the reach of children and do not allow
   persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

5. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

6. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

7. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the
   work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

8. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Battery tool use and care

1. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

2. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

3. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

4. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

5. Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.

6. Do not expose a battery pack or tool to fire or excessive temperature.
   Exposure to fire or temperature above 130 °C may cause explosion.

7. Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.
   Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service

1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool mis maintained.
2. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

Additional Safety Rules for air pump

1. Avoid using the pump at temperatures below 5 degrees or above 40 degrees.

2. Never leave the pump unsupervised while it is in use.

3. Ensure that the ON/OFF switch is turned off when connecting to the battery pack.

4. Caution! Operate the pump only for a short time. The appliance may overheat if operated continuously for longer than 10 minutes. Switch the appliance off immediately and allow it to cool down for at least 10 minutes.

5. Risk of injury! Do not pump any objects up to more than the intended pressure. They could burst and cause injury and/or material damage.

6. Do not exceed the permissible output range of the pump. Do not pump up any lorry, tractor or other large tyres.

7. Do not work with any materials that are or could be easily inflammable or explosive.

8. Never use the appliance for purposes other than the ones for which it was designed.

9. The charging device and the pump must be protected from moisture.

10. Before each use, check the device and battery. If damage is detected, do not use the device. Have repairs performed only by a queried technician. Never open the device yourself.

11. The device produces a high pressure. Do not direct the air outlet at persons or animals.

12. Remain alert at all times! Never use the appliance when you are distracted or do not feel well.

13. High pressure air could result in death or serious injury. Never operate above maximum operating pressure. Do not operate with pressure
    switch or safety valve set above maximum allowable working pressure.

14. Inhalation hazard. Using pump to supply breathing air could result in death or serious injury. Do not use pump to supply breathing air.

15. The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a danger of
    swallowing or suffocating.

Residual risk

Even if you use the 20 V Li-ion Air Pump properly per the instructions provided and following all safety notes, there are always residual risks. The following risk may occur:

Accidental Starting: Always remove the battery pack from the device before carrying out any adjustment, servicing or maintenance. When not in use, store the battery pack in a safe, dry, clean environment.
Reduce residual risks by using the 20 V Li-ion Air Pump with care and following all safety notes as well as other instructions.

Parts list

1. On board storage for air hose
2. Digital pressure gauge
3. Reduce pressure button (minus button)
4. Unit button (PSI, BAR, KPA, KG/CM2)
5. Increase pressure button (plus button)
6. Tapered adaptor
7. Presta tyre valve adaptor
8. Ball adaptor
9. Air hose connector
10. LED light
11. LED light on/off button
12. On board storage for adaptors
13. Battery pack release button*
14. Battery pack*
15. Air hose
16. On/ off trigger switch
17. Lock-on button
18. Air nozzle
19. Air chuck of air hose

• Battery is not included. Shown only for illustrative purposes.

Assembly

WARNING: Always remove or disconnect battery pack before adjusting, cleaning, servicing or transporting the air pump.

WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury.

WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

To install or remove the air hose

• Slightly turn the air hose connector (9) counterclockwise (See Fig. A).
  

• Insert the threaded end of the air hose (15) into the air hose connector (9) (See Fig. B) , and then turn the air hose connector (9) clockwise to secure. (See Fig. C)
  
  

• To remove the air hose (15), turn the air hose connector (9) counterclockwise, and then pull the air hose (15) out. (See Fig. D)
  
  

Operation

To remove or install battery pack (not supplied)

Depress the battery pack release button (13) to release battery pack (14) from the air pump. After recharging, insert the battery pack (14) into battery port. A simple push and slight pressure will be sufficient. (See Fig. E)

WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING: Do not leave items to be inflated, unattended, while inflator is in use. These items can burst and could cause serious injury.

WARNING: Since the pressure gauge is not calibrated, and is therefore not binding for exact values, tyre pressure must be checked using a reliable measuring device before driving a vehicle with vehicle tyres inflated with the inflator.
Driving a vehicle with improperly inflated tires could result in serious injury.

On/off switch

Depress the trigger switch (16) to start the air pump and release it to stop the air pump. (See Fig. F1)

Continuous use

Depress on/off trigger switch (16) then lock on button (17), release on/off switch (16) first and lock on button (17) second. Your switch (16) is now locked on for continuous use. (See Fig. F1)
To switch off the air pump just depress the lock on button (17). (See Fig. F2)

WARNING: Risk of bursting. Do not operate pump to result in output pressure greater than marked maximum pressure of item to be inflated. Do not use at pressure greater than 150 PSI.

WARNING: Never leave the pump during inflation. After inflating, disconnect the pump from object being inflated.

Using the air pump

The supplied accessories perform a variety of functions.

Air chuck of air hose:

The air chuck of air hose (19) can be used to inflate a mtyre with valve stem. (See Fig. G)

Presta tyre valve adaptor:

The presta tyre valve adaptor (7) can be used to inflate a tyre.

1. Remove the cap of the presta valve stem by turning it anticlockwise. (See Fig. H1)

2. Loosen the locking nut of the presta valve stem by turning it anticlockwise. (See Fig. H2)

3. Screw the presta valve adaptor (7) onto the locking nut, and then connect the air hose (15) to the presta valve adaptor (7). (See Fig. H3, H4)

Ball adaptor:

The ball adaptor (8) can be used to inflate any type of sports ball or any other item that requires an inflation sports ball adaptor (8). (See Fig. I)

The tapered adaptor:

The tapered adaptor (6) can be used on smaller pinch valves to inflate small items like floatables and children’s toys, which usually require the user to inflate them by blowing air into them.

Digital pressure gauge

When the battery pack (14) is inserted, the digital pressure gauge (2) will automatically light up.
If the object to be inflated is connected to the air pump, the air pressure of the object is displayed on the pressure gauge when you turn on the air pump.
If nothing is connected to the air pump, the pressure gauge (2) displays “0”

• You can set the air pressure on the pressure gauge (2).
• To change the unit, press the unit button (4).
• To increase the pressure value, press the plus button (5).
• To decrease the pressure value, press the minus button (3). (See Fig. J)
  

NOTE: After 60 seconds of inactivity, the digital pressure gauge (2) will turn off automatically to conserve energy.

WARNING: The digital pressure gauge (2) must turn on before operating the air pump. Please read and understand the instructions provided in the manual prior to operation.

1. To choose desired pressure format (PSI, BAR, KPA, KG/CM2), press the unit button (4). Each press of the button (4) cycles through the pressure format. ( See Fig. K1, K2, K3, K4)
   ![Pressure

format](https://manuals.plus/wp-content/uploads/2022/12/Screenshot_24-13.jpg) ![Pressure

format](https://manuals.plus/wp-content/uploads/2022/12/Screenshot_25-14.jpg) ![Pressure

format](https://manuals.plus/wp-content/uploads/2022/12/Screenshot_26-11.jpg) ![Pressure

format](https://manuals.plus/wp-content/uploads/2022/12/Screenshot_27-9.jpg)

2. Screw the air chuck (19) or the desired adaptor onto the object you wish to inflate. When connected correctly, the gauge (2) will display the pressure.
3. Press “+” (5) or”-” (3) to check pre-set level. Adjust to desired level by pressing “+” (5) or”-” (3) . Once pre-set pressure is set, wait a few seconds for display to change back to zero.

Using the LED light

Your air pump is equipped with an LED light (10), it increases visibility- great for dark or enclosed area. (See Fig. L)

To turn on the LED light (10) simply press the light on/off button (11).
To turn off the LED light (10) simply press the light on/off button (11) again.

Maintenance

Remove the battery pack (14) from the machine before carrying out any adjustment, servicing, cleaning or maintenance.

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
Do not at any time let brake fluids, petrol, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which can result in serious personal injury.

Cleaning

WARNING. Water or other liquids that have entered the housing can cause a short circuit. Do not immerse the air pump in water or other liquids.

WARNING. Make sure that no water or other liquids get into the housing.

WARNING. Do not use aggressive cleaning agents, brushes with metal or nylon bristles, or sharp or metallic cleaning objects such as knives, hard spatulas and the like. These can damage the surfaces.

1. Turn off the air pump. Wait until the device stops completely.
2. Remove the battery pack (14).
3. Clean the air pump with a soft cloth or brush.

Storage and transportation

Storage

1. Remove the battery pack (14).

2. Clean the air pump as described previously.

3. Press the air hose (15) and adaptors (tapered adaptor (6) / ball adaptor (8) /presta tyre valve adaptor (7)) into the storage area on the air pump.

   • On board storage for air hose (1). (See Fig. M1)

   • On board storage for adaptors (tapered adaptor (6) / ball adaptor (8) / presta tyre valve adaptor (7)). (See Fig. M2)
     

4. Store the air pump and its accessories in a dry, frost-free, well-ventilated place. Protect the air pump from direct sunlight.

5. We recommend using the original package for storage or covering the air pump with a proper cloth or enclosure to protect it against dust.

Transportation

1. Switch the air pump off and remove the battery pack (14) before transporting.
2. Always carry the air pump by its handles.
3. Protect the air pump from any heavy impact or strong vibrations which may occur during transportation in vehicles.
4. Secure the air pump to prevent it from slipping or falling over.

Warranty

Your new FERREX® 20 V Li-ion Air Pump will more than satisfy your expectations. It has been manufactured under stringent FERREX®. Quality Standards to meet superior performance criteria.

You will find your new 20 V Li-ion Air Pump easy and safe to operate, and, with proper care, it will give you many years of dependable service.

CAUTION. Carefully read through this entire instruction manual before using your new FERREX® 20 V Li-ion Air Pump.

Take special care to heed the Cautions and Warnings.

Your FERREX® 20 V Li-ion Air Pump has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this FERREX® 20 V Li-ion Air Pump, making it easy to maintain and operate.

Use only FERREX® replacement parts for your product.
Non-conforming parts or modifications made to parts will void your warranty.

Environmental protection

Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way

What your 5 year warranty means

Great care has gone into the manufacture of this product and it should therefore provide you with years of good service when used properly.
In the event of product failure within its intended use over the course of the first 5 year after the date of purchase, we will remedy the problem as quickly as possible once it has been brought to our attention. In the unlikely event of such an occurrence, or if you require any information about the product please contact us via our after sales support services, details of which can be found in this manual and on the product itself. After Sales Support TEL: 1300 889 028 or email: info.aldi@positecgroup.com

Troubleshooting

pack.
Battery capacity is low.| Charge the battery pack.
Battery pack is too hot/cold.| Allow to cool/warm.
The motor is overheating| Cooling vents may be obstructed by dust or other obstacles.| Clean and clear vents. Do not cover with hand during operation.

For further inquiries or issues associated with your 20 V Li-ion Air Pump, call our Customer Service on 1300 889 028 or email us at info.aldi@positecgroup.com

Technical specifications

• Rated voltage: 20 V d.c.
• Max pressure: 150 PSI
• Air hose length: 50 cm
• Machine weight: 0.79 kg
• Product dimensions: 16070235 mm
• Product code: 706768

This 20V Air Pump is compatible only with the ALDI range of 20V Xfinity Plus Batteries and Chargers, which can be purchased at your local ALDI store.

This 20 V Li-ion Air Pump complies with the following standards:

• Safety: AS/NZS 62841.1 (ISO 12100)
• EMC: AS/NZS CISPR14.1

ALDI guarantees that our exclusive brand products are developed to our stringent quality specifications. If you are not entirely satisfied with this
product, please return it to your nearest ALDI store, within 60 days from the date of purchase, for a full refund or replacement, or take advantage of our after sales support by calling the supplier’s Customer Service Hotline.

Support

Made in China
FERREX® is a registered trademark of ALDI Stores
DISTRIBUTED BY:
ALDI STORES
1 SARGENTS ROAD
MINCHINBURY NSW 2770
www.aldi.com.au

Tel: 1300 889 028 (toll free)
e-mail: info.aldi@positecgroup.com

References

• ALDI Supermarkets - Good Different
• Product Registration

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>