INSTACHEW Purebite Feeder User Manual

User ManualPurebite Feeder

PRODUCT OVERVIEW

1. Cover
   Place desiccant

2. Translucent storage bucket
   After the granary is installed into the main body of the fuselage, do not disassemble

3. Main control button 1. Initial setting: long press the button for 5 seconds, after the beep, you can switch to Bluetooth network configuration and AP network configuration mode 2. Restore factory settings: Press and hold the button for 10 seconds tounbind the device and clear the information and settings in the device

4. Indicator status Lack of food (orange is always bright) Grain blocking (red always on) Distribution network (white flashing) Normal operation (White always on) Low battery (red breath) Equipment upgrade (blue breathing)

5. Food outlet

6. 6° inclined food bowl 304 stainless steel

INVENTORY

Product Overview

Component List

PRODUCT INSTALLATION

Step 1: Battery Installation
Put 4 AA batteries into the battery compartment, As a backup power source
“Please make sure there is no grain in the barrel before installing the battery “The barrel can be installed upside down
Attention: This is an emergency power supply for power failure. If there is no such requirement, you can skip this step

Step 2: Power Cord Installation
Press the USB cable flatly into the bottom power cord slot

Step 3: Food bowl installation
Place the main body on a level surface install the food bowl below the grain outlet Step 4: Connect the power supply
Take out the body of the smart feeder and insert the power cord into the power adapter socket at the bottom of the body to ensure that it is firmly inserted

PRODUCT INSTRUCTIONS
Step 1 Open the top cover
Open the cover and add pet food Step 2.Add desiccant
Place desiccant evenly into the box behind the top Step 3. Add device
To download the app, press Prompt to add device, set mobile Feeding plan Step 4. If manual feeding is needed
Press the manual feed button three times, One portion of grain can be produced (about 10g-15g)

APP REGISTRATION

1. Open App
2. Click “Sign Up” to register account
3. After registering email, input received verification code to continue creating your new account
4. Set up password
5. Login to account successfull ull

PRODUCT INSTRUCTIONS

1. Login the App to add device
2. Click “Purebite Smart Feeder”
3. Confirm Indicator Rapidly Blink
4. Enter WiFi Password
5. Connecting…
6. Device added successfully will appear

PUREBITE INTERFACE INTRODUCTION

Pet Feeder Interface Introduction

1. Setting, other functions
2. Modify Feeding Plan
3. Add Feeding
4. View and Edit Task
5. pet Profile

Settings

1. Device Name
2. Device Information
3. Tap-to-Run and Automation
4. Offline Notification
5. Share Device
6. FAQ & Feedback
7. Add to Home Screen
8. Check Device Network
9. Device Update
10. Remove Device

DEVICE NETWORKING

https://www.instachew.com/instachew-infinity-app

Step 1: app download (scan the right QR code)

1. IOS users can search for ‘INSTACHEY1 INFINITY’ in the APR Store to &Armload
2. Android users can search for ‘Gcogle Pby ARP in thebrowser. search for INSTACHEW INFINITY’ in ‘Goo

• Play’ and downbad and register.
  *The equipment needs to be connected to the power supply first and then the ctstribution network operation

Step 2: Device power up
Power on the device open the battery corker at the bottom of the mac Fine. insert one end of the free LISEI cable into the LISS hob at the bottom of the rnachne. and the other end into rts arm adapter or the socket with LISS interlace. and then connect the deite to the power suPPIY
Step 3: Equipment distribution network
At present the device supports two network configuration modes Betroth network configuration and AP r. ” configuration You can choose one of the two Its recommended that users use Bluetooth configuration network first. Bluetooth configuration fails. you can switch to AP network configuration Note that the network ca-ratification The process needs to be completed with 3 mirages. and the timeout needs to be triggered to enter the distribution network again

1. Bluetooth distribution mode
   1. Put the devote cn the power and let it stand without long pressing the button to ensure that the indicator is lbs hing
   2 Open the APP and motile-phone Bluetooth, did( the sir in the upper right cornrow the APP hornpipe enter the device list* and enter the device that pops opal the bottom-sf the PPP to add;
   3 Conf-mi that the device indcator is flashing slowly. and enter they/di password as prompted by the APP to ensure that the phone is connected to a 246 wife network
   4 After the network configure-ration is successful, the ins will be steady white. indicating that the device is connected to the network and you can use the APP to remotely control the device.Al the same time. you can turnoff the mobile phone Bluetooth.

2. AP distribution network mode
   1. Put the device on the power and let it stand. press and hold the button for S seconds. release it after a beep. and observe to confirm that the indicator light is blinking in a breathe mode
   2_ Open the APP. tum off the Bluetooth of the mobile phone. dick the-: sign in the Moper night comer of the APP homepage to enter the device list. select the smart feeder and click to enter, then click the network config-ration mode ri the upper nix corner to switch to spotlit network conflation (Condorcet erred)’;
   3. Conf rm that the device indicator Ight flashes in a breathing mode, and enter the WiFi password as prompted by the APP to ensure that the phone is connected to a 24G WiFi network. After the nos is complete enter the hotspot network co-configuration instruction page
   4. Select the network starting with SmartLife- in the netvwxk configuration list to correct. After the connection is successful return to the APP to enter the irk configuration progress page:
   5. After the network configtration is successful. the iris will be steady white. indicating that the de/iceiscorrected to the network and )tu can use the APP toremotelycontrol the device

Step 4: Network distribution failure troubleshooting @Router troubleshooting

1. Please confirm whether the coin password you entered is correct. and pay attention to the %MP, accoum or whether there are spaces and case problems before and after the password
2. Please confirm that you are connected to a 24G band network. At present the device does not support 5g band network that is. thedefault network name is WiFi network with the word -5g
3. Make sure that the encryption method in the wireless settings of the router is PAWPAW-PSK, the authentication type is AES, or both are set to automatic. The wireless mode cannot be 11 n only;
4. If the router enables wireless MAC address filtering, you can try to remove the device from the router’s MAC filtering list to ensure that the router does not prohibit the device from connecting to the Internet or turn off MAC address filtering;
5. Make sure that the router has enabled the DHCP service. If it is not enabled, the IP address will be occupied. Among them, ec”, ecl”, and ‘V belong to the professional field and need to contact the router manufacturer for adjustment.

2 Other Problems
Please troubleshoot the router first, and then scan the Chatter QR code at the end of the manual to feedback the problem. Please provide the router brand and model when giving feedback

Color description of indicator light

Self check table of machine status (subject to the from of main control key on) • White flashing: Bluetooth standby network| •White breath: Hot spot to be distributed| •White light is on: Already equipped
---|---|---
•Orange:Food shortage The grain is lower than the height detected by the optical eye in the cabin| •Red:Block food Need to cut off the power and re- energize, then take, Out of the turntable to clean up the grain| •Flashing red Enter the production test mode, you need to cut off the power
and re-power it to restore
•Red breath: The battery is too low| •Blue breath: The equipment is being
upgraded online| •Off. The device has no power or battery mode, you
need to remove the battery, only connect the USB
cable, and plug the USB cable again

BASIC PARAMETERS & MATTERS NEEDING ATTENTION

within 15mm
Power supply :5V 1A| Communication method :Wi-Fi connection (2.4GHz)
Warranty period :1 year|

Precautions

1. Please use it in an indoor environment, do not use it in direct sunlight such as a balcony.
2. Do not drop items other than pet dry food into the storage bucket, otherwise there is a risk of causing equipment abnormalities or causing pets to eat by mistake.
3. To prevent pets from falling, it is recommended to place the feeder in a corner or against a wall.
4. Please cover or store the power cord to prevent pets from biting the cord and causing dangerous situations such as electric shock.
5. Do not disassemble or modify the device by yourself.
6. This product does not support pet food with special shapes, holes and a diameter greater than 10mm. It is only suitable for dry pet food. Do not add wet food.
7. The shape and density of pet food grains will cause a certain deviation in the capacity of the grain bucket.
8. The number of grams of grain per serving varies due to different grain densities.
9. In the case of battery power supply, the standby time can be up to 8 days. Please install the battery in advance before traveling.
10. Do not directly push the turntable into the equipment, it will cause damage to the components, please watch the video.
11. To disassemble the turntable, put it into the hole by hand and pull it up. After the turntable is taken out, the inside can be wiped with a wet wipe, please do not wash with water

FAQ

Network configuration timeout/Network configuration failure****

– 1. Th-era password is incorrectly entered (the smal eyes that cal open the input page)
– 2 Connected to a 56 network (generally a router will release two frequency bands, 2.48 and 5G, check whether the win name has the word 56. if you we sure that you we °chatted to 2.4Gchz, please go to the router settng interface to con&m whether mane is enabled. If it is turned a; it needs to be tuned A
– 3. The connection be is rot plugged n well or the corrector hone is damaged you can check whether the Ight is cfsplayednamally
– 4. Whether the status of the device oratorical is correct (floating Gallic’ key or breathing tit misreading. check whether the PPP is snitched to the hotspot dstribution mode)
– 5. User operation problems, check whether the graben is in accordance with the network distribution deepness and ensure that the machine is close to the router Check whether the netmeck status of the device to be configured is consistent with the APRs network configuratia mode. The ircicator cocrespondng to the Bbetoc 4han fkowation network flashes sl7wly. and the nelicata corresponding to the – AP network anfiguraton flashes in a breathng manner. The Bluely:0 catlicaration network needs to turn on Bluetooth. and the AP network needs to turnoff Ruetooth

No food for feeding plan****

– 1.Check whether the turntable is instalkd properly
– 2 Check whether the food is stuck (picture or video, judge whether the indcator Ight s red)
– 3 APP awn control the output of gain, duck whether the indicator Ight is always on if it is flashing, it means the device has no network and It is correct that no grain is output.
– 4. Pas out the grain, take out the turntable, trigger the grain to see if the motor does not turrt if it does not turn the motor is abnormal, and the rrachne needs to bereplaced No food all be delvered under the battery condition.
– Please note Mat the device carrot interact with the APP at the battery concItion. because there is no response after the APP contrd

No grain output on the device manually****

– 1. Check the button press the button 3 times and ask the user if he feels the button twice a may bet at the button malfunacning
– 2 Check whether there is power: check whether the indicator byte is on, whether it s flashng steady, or other cobs. a means that the dace has power
– 3 Check whether the cperatcn is correct press the button 3 tires within 5 seconds, don’t be too eager. just use the normal speed button

APP manually adds meals without paying****

– 1. Check whether the device tease network check whether the indcata light is normal and always on if it is, there is no probkm when powering on. and you can perform step 2 ircubkshcoung
– 2 Check whether the motor is abnormal: put your ears dose to the machine to see if you an hear the rotatng sound a pour out the gran takeout the turntable, operate the gran. and see if the motor rotates
– 3 Check if the turntable is thstalkl

Abnormal grain output****

– 1 theCk whether the turntables nstalkd
– 2. If several copes are issued. it may be an old machine. The feeding plan set before will also be executed. Ftst delete all the feedng plans and reset than
– 3. Grain delreery is nonstop. If the cause of the tuntable is elimtsted.it may be a madane problem A 30-second video must be provided and retuned to the factory after confirmation

Other

1. The device is powered off, do I need to re-configure the network?****

– No need to reoperate the distribution network, the module will autcmatcally work

2. Can the feeder be washed with water?****

– The body is not washable, it is recommended to takeout the turntable and wipe it with a wet tissue

3. Why does the machine turn up bright orange?****

– Check whether there’s foal in the machine that covers the optical eye. if it does, the machine would define current mode as food shortage condition_ That’s when the light is orange.
– When the food inside turns full and leaves the optical eye away. the light will switch to white as the machine condition is defined as common-operated.

4. Yesterday the device was equipped with the Internet, but the device disappeared on the APP today?****

– It may be unbound by a family minter, or there may be a problem with the device button rebound.
– After ocrifirmation, you need to return to the factory

5. The user operates manual grain output, but the equipment does not respond?****

– User operation problems, tell users not to rush when operat’ng,Press 3 times within 5 seconds

6. How much grain can the feeder hold?****

– It vanes according to the density of the grain, about 2.5 kg. About one cat for half a month

7. Why does the indicator light not light up?****

– Need to check whether it is during the energy saving period of the machine, from 11 pm to 7am

8. Can the indicator light be turned off?****

– Yes, tap the main control key of the fuselage 5 times to close ft. and tap it 5 times to open it

9.Can multiple people control the device?****

– When successfully connected, find and dick the/ icon in the on the device control page. click Sharing Device and input the phone number to send device sharing invitation

10. The device flashes in the camera?****

– This is the infrared light emitted by the optical eye of the device is detected by the camera.
– Nocturnal human eyes can’t see

11. Will food be delivered successfully when the device is powered by battery?****

– Will do if the feeding plan is previously set

12. The user has changed the router at home, does the device need to be re-configured?****

– Yea. it Should be noted that you need 10 long iXeSS the 10 second button to unbind or operate to unbind at the app end (click the / icon in the upper right corner of the control page to enter the secondary Page. pull to the bottom and click unbind), and then carry out the distribution network operation

13. How long does the machine stand by on battery?****

– Calculated as 3 times a day, it can stand by for about 25 days.
– When the device is supplied with food or the battery is short, the APP will see the data

14. Machine size****

All contents in this document have been carefully ched(ed. If there are any prindng errors or misunderstandings in the contents. pleasea:4’40c our company.
Note If there is any technical improvement of the produtt, it will be included in the new manual without further notice. If there is any change in the appearance and color of the product, the real object shall prevail.
PET CARE MADE EASY

Documents / Resources

| INSTACHEW Purebite Feeder [pdf] User Manual
Purebite Feeder, Purebite, Feeder
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>