Altronix eBridge1ST EoC Hardened Mini-Transceiver Installation Guide

Altronix eBridge1ST EoC Hardened Mini-Transceiver

Overview:

Altronix eBridge1ST EoC hardened transceiver transmits data at 25Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE/PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options and is powered by an external midspan or ends pan. The receiver passes PoE/PoE+ power over the same coax cable to the eBridge1ST transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate a cost-effective, simple way to replace legacy analog products with new IP devices over existing coax up to 500m.

Features

Agency Listings:

• UL/cUL Listed for Information
  Technology Equipment (UL 60950-1).

• CE European Conformity.

Input:

• PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) from eBridge receivers.

Compatible Receivers:

• eBridge1PCRM, eBridge4PCRM, eBridge8PCRM, eBridge16PCRM,
• eBridge1PCR, eBridge1PCRX, eBridge4PCRX, eBridge8PCRX, eBridge16PCRX.
• eBridge8E
• Visit www.altronix.com for the latest compatibility list.

Ethernet :

• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5.
• Distance: up to 500m.
• Speed: 10/100BaseT, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) Delivered to camera by eBridge1ST. Power provided by eBridge receiver to eBridge1ST by PoE protocol.*

Coax Link:

• Distance: Coax 500m (Maximum Length of Coax Type vs. Camera Power/PoE Class, pg. 4) for power delivery.
• Throughput is rated to pass 25Mbps of data at distances up to 500m.
• Connectivity: BNC, RG-59/U or similar.

LED Indicators:

• Green – PoE ON (by respective RJ45 jack).
• Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.
• Blue: Coax Link is active.

Environmental:

• Operating Temperature:
  For 15W: – 40ºC to 75ºC (– 40ºF to 167ºF).
  For 30W: – 40ºC to 65ºC (– 40ºF to 149ºF).

• Storage Temperature:

  •  40ºC to 75ºC (– 40ºF to 167ºF).

• Humidity: 20 to 85%, non-condensing.

Functions:

• Auto detection and protection of legacy non-PoE cameras/devices. Applications:
• Retrofit digital IP cameras in an analog

CCTV installation.

• Works with IP Megapixel and non-Megapixel cameras (see note, Check below).
• Extend Network link distance in an industrial environment over 610m (see note, Check Below).
• Upgrade deployed CCTV Coax to a digital network in Retail, Casinos, Airports, Schools, Hospitals, etc.

Mechanical:

• Dimensions (W x L x H approx.): 2.27” x 2.645” x 1.12” (57.7mm x 67.2mm x 28.4mm).

Installation Instructions

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction. Wiring should be UL Listed and/or Recognized wire suitable for the application. eBridge1ST is not intended to be connected to outside plant leads and should be installed indoors within the protected premises. eBridge1ST is intended for indoor use only.

1.  Secure unit to the desired mounting surface with a proper fastening device utilizing the case’s mounting hole (Fig. 2a,). Unit should be mounted in proximity of camera/device.
2. Connect structured cable from IP camera/device to RJ45 jack marked [PoE Out] (Fig. 2 and 3).
3. Connect Coax cable from eBridgePlus receiver (please refer to the list of compatible receivers on page 1) to
   BNC tether cable marked [Coax] (Fig. 2 and 3,).

Note: This unit is designed to accommodate Megapixel, HD720, HD1080, and VGA (SD) cameras. It is important to note that some high resolution and high frame rate cameras may demand faster headend processing ability, such as a PC graphics card, to present a quality image. If the headend processing equipment’s speed is insufficient, the image may show pixilation and latency. It is advisable to pretest system if unsure. Alternatively, frame rate and resolution may be reduced to accommodate system equipment.

Technical Specifications:

compliant to IEEE 802.3at (30W).
Please refer to the list of compatible receivers on page 1
Indicators| Yellow (RJ45 connector): On – Link, Off – No Link, Blinking – Activity.
Green (RJ45 connector): On – 100Base-TX, Off – 10Base-T.
Green: PoE Active.
Blue: Coax Link is active.
Environmental Conditions| Operating Ambient Temperature: UL60950-1 For 15W: – 40ºC to 75ºC (– 40ºF to 167ºF). For 30W: – 40ºC to 65ºC (– 40ºF to 149ºF).
Relative humidity: 85%, +/ – 5%
Storage Temperature: – 40ºC to 75ºC (– 40ºF to 167ºF). Operating Altitude: – 304.8 to 2,000m.
Regulatory Compliance| UL/cUL Listed for Information Technology Equipment (UL 60950-1). CE European Conformity.
Weights (approx.)| Product: 0.22 lb. (0.1 kg), Shipping: 0.4 lb. (0.18 kg).

Single PoE Camera Connection:

Typical Application:

Maximum Length of Coax Type vs. Camera Power/PoE Class:

Cable Type| Total Power Consumption| Max Data Distance| Max Power Distance
---|---|---|---
RG59u/23awg| 13W| 500m| 264m
RG59u/23awg| 25W| 132m
RG59U/22awg| 13W| 334m
RG59U/22awg| 25W| 167m
RG59U/20awg| 13W| 532m
RG59U/20awg| 25W| 266m
RG59U/18awg| 13W| 846m
RG59U/18awg| 25W| 423m

Notes:

Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA | 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty
IIeBridge1ST Rev. 012816 G15U

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>