ALFATRON ALF-WP70S-UB Wall Plate User Manual
- June 3, 2024
- ALFATRON
Table of Contents
ALFATRON ALF-WP70S-UB Wall Plat
Preface
This manual describes the functions, installation and operation principles and methods of the product in detail. Before installing and using this product, please read it carefully
FCC Statement
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. It has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a commercial installation.
Operation of this equipment in a residential area is likely to cause
interference, in which case the user at their own expense will be required to
take whatever measures may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would
void the user’s authority to operate the equipment.
Do not dispose of this product with the normal household waste at the end of its life cycle. Return it to a collection point for the recycling of electrical and electronic devices. This is indicated by the symbol on the product, user manual or packaging. The materials are reusable according to their markings. By reusing, recycling or other forms of utilization of old devices you make an important contribution to the protection of our environment. Please contact your local authorities for details about collection points.
Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- 1This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged due to electrical spikes, surges, electric shock, lighting strikes, etc. The u se of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Introduction
The ALF-WP70S-UB wall plate is a 2×1 switcher and HDBaseT transmitter with an HDMI and USB-C input. It features a US one-gang enclosure for Decora-style wall plate openings with interchangeable black and white wall plates and faceplates. The USB-C input provides an ideal AV interface for connecting with new Apple MAC notebooks and Windows computers as well as smartphones and tablets. Supports video resolution up to 4K@60Hz 4:4:4. The product is remotely powered via the receiver or other HDBaseT equipped devices via POE.
Features
- Compliant with HDMI 2.0b, HDCP 2.2 and DisplayPort 1.2a
- Supports 18Gbps video bandwidth
- Video resolution up to4K@60Hz 4:4:4
- HDBaseT output can extend video transmission distance up to 230ft / 70m for 1080P or 131ft / 40m for 4K via a single CAT6 / 6a / 7 cable
- Support HDR10 and HDR10+
- Audio formats support, True HD, Digital+, Digital; DTS X, HD Master Audio, HD High Resolution Audio, 5.1; PCM 2-8Ch
- Support HDMI and USB-C input
- US one-gang enclosure for Decora-style wall plate openings
- Input signal selection supports automatic mode and manual mode
- USB2.0 extension with Receiver
- Support POE function (only from Receiver to Transmitter)
- With USB-C charging port
- Available in white or black coating
Package Contents
- 18Gbps HDBaseT 70M with USB-C / HDMI & KVM Functionality Wall Plate Transmitter
- User Manual
Specifications
Technical
HDMI Compliance| HDMI 2.0b, DisplayPort 1.2a
HDCP Compliance| HDCP 2.2
Video Bandwidth| 18 Gbps
Video Resolution| 4096×2160@24 / 25 / 30 / 50 / 60Hz, 3840×2160@24 / 25 / 30 /
50 / 60Hz, 2048x1080p, 1080p@23.98 / 24 / 25 / 29.97 /
30 / 50 / 59.94 / 60Hz,1080i@50 / 59.94 / 60Hz, 720p@50 / 59.94 / 60Hz, 576p,
576i, 480p, 480i
Color Space| RGB, YCbCr 4:4:4, YCbCr 4:2:2, YUV 4:2:0
Color Depth| 8/10/12-bit
HDR| HDR10, HDR10+
HDMI Audio Formats
| Dolby Atmos, TrueHD, Digital+, Digital; DTS X, HD Master Audio, HD High
Resolution Audio, 5.1; PCM 2-8Ch
Transmission Distance| Max distance 1080p: 230ft / 70m over CAT6 / 6a / 7 Max
distance 4K: 131ft / 40m over CAT6 / 6a / 7
ESD Protection| Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact
discharge)
Connection
Transmitter
|
- Inputs: 1x HDMI – Type A 19-pin female 1x USB-C
- Outputs: 1x HDBaseT Out – RJ45, 8-pin female 1x USB-C (only for charging)
- Control: 1x USB-B Micro USB, Update port
Receiver
|
- Inputs: 1x HDMI IN – Type A, 19-pin female 1x HDBaseT IN – RJ45, 8-pin female
- Outputs: 1x HDMI OUT – Type A, 19-pin female 1x AUDIO OUT – Phoenix jack
- Control: 2x USB – USB A TYPE 1x FW – Micro USB, Update port
Mechanical
Housing| Metal Enclosure
Color| White / Black
Dimensions| Wall plate: 33.3mm [W] x 65.7mm [D] x 68.7mm [H] Faceplate: 69.9mm
[W] x 3mm [D] x 114.3mm [H] Receiver: 200mm [W] x 98mm [D] x 23mm [H]
Weight| Wall plate: 196g, Receiver: 511g
Power Supply| POE (onlyfrom Receiver to Transmitter)
Power Consumption| Wall plate: 9W(Max), Receiver: 11W (Max)
Operating
Temperature
| 32 – 104°F / 0 – 40°C
Storage Temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20 – 90% RH (no condensation)
Product Dimensions
Operation Controls and Functions
Transmitter Panel
No.
|
Name
| Function Description
---|---|---
1
|
Power LED
| The power LED indicator will illuminate g re en when the product is powered on, and red when the product is in standby.
2
|
HDMI LED
| When the HDMI input port is active and the HDMI signal is detected, the green LED will be on.
3
|
USB-C LED
| When the USB-C input port is active and USB-C signal is detected, the green LED will be lit.
4
|
HDMI port
| HDMI input port, connect to HDMI source device.
5
|
USB-C port
| (1) USB-C signal input port.
(2) Charging port for devices with USB-C port.
6
|
CHARGE port
| Connect this port to a power supply, the USB-C port will then power the connected device.
7
|
USB-B port
| Connect to the computer’s USB port.
8
|
SOURCE button
| Used to switch HDMI / USB-C input signal.
9
|
HDBaseT OUT
| Connect to the HDBaseT IN port of the Receiver with a CAT6 / 6a / 7 cable.
10
|
Micro-USB
| Firmware update port.
Receiver Panel
| No. | Name | Function Description |
|---|
1
|
Power LED
| When the product is powered on, the red LED indicator will be illuminated.
2
|
DC 24V
| DC 24V power supply port.
3
|
FW
| Firmware update port.
4
|
HDBaseT IN
| Connect to the HDBaseT OUT port of the Transmitter with a CAT6 / 6a / 7 cable.
5
|
HDMI OUT
| HDMI output port, connect to an HDMI display device.
6
|
HDMI IN
| HDMI input port, connect to an HDMI source device.
7
|
AUDIO OUT
| Analog audio output port.
8
|
USB port
| Two USB ports for KVM functionality.
Note:
This transmitter supports automatic / manual mode for source signal
input.In manual switching mode, press the SOURCE button to select HDMI / USB-C
input source.
In automatic switching mode, the last connected or the currently connected
source signal will be selected automatically; When both HDMI and USB-C ports
are connected to active signal, HDMI signal input takes preference;
When both HDMI and USB-C ports are not connected to active signal, it will
switch to the source signal of the Receiver.
Application Example
After-sales Service
Should you experience problems using the Alfaro ALF-WP70S-UBplease refer to the manual and operation controls and functions (6). Should the error persist, note that any transport costs of the equipment to the distributor are borne by the user during the warranty.
Product Limited Warranty: Alfaro warrants that its products will be free from defects in materials and workmanship for seven years, which starts from the first day of purchase. Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the warranty period must be presented to obtain warranty service.
What the warranty does not cover (servicing available for a fee):
- Warranty expiration.
- Factory applied serial number has been altered or removed from the product.
- Damage, deterioration, or malfunction caused by:
- Normal wear and tear.
- Use of supplies or parts not meeting product specifications.
- No certificate or invoice as the proof of warranty.
- The product model showed on the warranty card does not match with the product or if the product had been altered.
- Damage caused by force majeure.
- Servicing not authorized by Alfa Tron.
- Any other causes which do not relate to a product defect.
- Delivery, installation or labor charges for installation or setup of the product.
Warranty
-
This limited warranty covers defects in materials and workmanship in this product.
-
Should warranty service be required, proof of purchase must be presented to the Company. The serial number on the product must be clearly visible and not have been tampered with in any way whatsoever.
-
This limited warranty does not cover any damage, deterioration or malfunction resulting from any alteration, modification, improper or unreasonable use or maintenance, misuse, abuse, accident, neglect, exposure to excess moisture, fire, improper packing, and shipping (such claims must be presented to the carrier), lightning, power surges, or other acts of nature. This limited warranty does not cover any damage, deterioration or malfunction resulting from the installation or removal of this product from any installation, any unauthorized tampering with this product, any repairs attempted by anyone unauthorized by the Company to make such repairs, or any other cause which does not relate directly to a defect in materials and/or workmanship of this product. This limited warranty does not cover equipment enclosures, cables or accessories used in conjunction with this product.
This limited warranty does not cover the cost of normal maintenance.
Failure of the product due to insufficient or improper maintenance is not covered. -
The Company does not warrant that the product covered hereby, including, without limitation, the technology and/or integrated circuit(s) included in the product, will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be used.
-
Only the original purchaser of this product is covered under this limited warranty. This limited warranty is not transferable to subsequent purchasers or owners of this product.
-
Unless otherwise specified, the goods are warranted in accordance with the manufacturer’s product specific warranties against any defect attributable to faulty workmanship or materials, fair wear and tear being excluded.
-
This limited warranty only covers the cost of faulty goods and does not include the cost of labor and travel to return the goods to the Company’s premises.
-
In the event of any improper maintenance, repair or service being carried out by any third persons during the warranty period without the Company’s written authorization, the limited warranty shall be void.
-
A 7 (seven) year limited warranty is given on the aforesaid product were used correctly according to the Company’s instructions, and only with the use of the Company’s components.
-
The Company will, at its sole option, provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim under this limited warranty:
-
Elect to repair or facilitate the repair of any defective parts within a reasonable period of time, free of any charge for the necessary parts and labor to complete the repair and restore this product to its proper operating condition.; or
-
Replace this product with a direct replacement or with a similar product deemed by the Company to perform substantially the same function as the original product; or
-
Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty.
-
The Company is not obligated to provide the Customer with a substitute unit during the limited warranty period or at any time thereafter.
-
If this product is returned to the Company this product must be insured during shipment, with the insurance and shipping charges prepaid by the Customer. If this product is returned uninsured, the Customer assumes all risks of loss or damage during shipment. The Company will not be responsible for any costs related to the removal or re-installation of this product from or into any installation. The Company will not be responsible for any costs related to any setting up this product, any adjustment of user controls or any programming required for a specific installation of this product.
-
Please be aware that the Company’s products and components have not been tested with competitor’s products and therefore the Company cannot warrant products and/or components used in conjunction with competitor’s products.
-
The appropriateness of the goods for the purpose intended is only warranted to the extent that the goods are used in accordance with the Company’s installation, classification, and usage instructions.
-
Any claim by the Customer which is based on any defect in the quality or condition of the goods or their failure to correspond with specification shall be notified in writing to the Company within 7 days of delivery or (where the defect or failure was not apparent on reasonable inspection by the Customer) within a reasonable time after discovery of the defect or failure, but, in any event, within 6 months of delivery.
-
If delivery is not refused, and the Customer does not notify the Company accordingly, the Customer may not reject the goods and the Company shall have no liability and the Customer shall pay the price as if the goods had been delivered in accordance with the Agreement.
-
THE MAXIMUM LIABILITY OF THE COMPANY UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT