Madal Bal 8856630 Semi-Soaked Polyester Gloves User Manual
- June 3, 2024
- Madal Bal
Table of Contents
8856630 Semi-Soaked Polyester Gloves
Translation of original user‘s manual
Manufacturer: Madal Bal a.s.
Bartošova 40/3, CZ-760 01 Zlín, Czech Republic
www.extol.eu
Application:
The gloves are not intended for protection against minimal risks (category 1), which pursuant to Directive (EU) 2016/425 are exclusively the following: a) superficial mechanical injury; b) contact with cleaning materials of weak action or prolonged contact with water (i.e. only on water-repellent glove models); c) contact with hot surfaces not exceeding 50 °C; d) atmospheric conditions that are not of an extreme nature;
Extol® brand glove specifications :
8856602 to -05: synt. leather-palms, spandex-back, size 10“-13“; 8856650 to -53: synt. leather-palms, lurex-back, size 8“- 11“; 8856655 to -58: pig skin- palms, spandex- back, size 8“-11“; 8856620 to -22: nylon half-dipped in nitrile, size 8“, 10“; 8856630 to -33 (white)/ -35 to -38 (black): polyester (PES) half-dipped in polyurethane (PU), size 8“-11“; 8856670 to -71: nylon half-dipped in nitrile, size 8“, 9“; 99708: cotton +PVC dots, size 10“; 8856675 to -77: synt. leather-palms, lurex-back, size 8“- 10“; 99713 to -15; 99719: polyester (PES)+PVC dots, size 8“10“; 8856669: nylon half-dipped in nitrile, size 7“; 8856661 and -62: latex, size 7-8“ and 9-10“; 9964, 9965: Leather gloves, size: 10“-10,5“; 99708: cotton with PVC dots, size: 10“; 8856641 and -42: cotton, half-dipped in latex, size: 9“ and 10“.
Instructions for use and maintenance of the gloves:
The gloves must not be used if there is a risk of the gloves becoming caught
in moving machine parts and for protection against more serious risks than
specified in section „Purpose of use“. Always wear the correct glove size and
check their condition before use. Before using the gloves, inspect them for
compromised integrity (holes), undamaged seams, whether they have become hard
or excessively worn out or otherwise damaged. Do not use damaged gloves.
Protect the gloves against heat, organic solvents and their fumes, mineral
oils and grease. In the event of an allergic reaction after the gloves come
into contact with the skin of the user, do not use the gloves, e.g. the latex
on latex gloves is considered to be a potential allergen. The gloves are not
intended to be washed. A natural feature of leather and lurex is that after
drying their softness and flexibility (gripping ability) worsens. In the case
of gloves made from leather and lurex, remove mechanical particles using a
brush; half-dipped gloves, or textile gloves can be rinsed by hand in clean
cold water (not in the washing machine) and dried at room temperature. Prevent
the gloves from coming into contact with aggressive cleaning products, e.g.
bleaches. Short-term lifetime of the gloves is generally assumed because
gloves are consumable goods that are subject to wear depending on the
frequency and manner of use. When the gloves are wet, dry them at room
temperature. Prevent the effects of heat or microwave radiation for drying
purposes. When using the gloves, adhere to the fundamentals of generally
applicable hygiene rules, where it is assumed that every user should have
their own pair of gloves. Gloves used by a user with skin injuries, mycosis,
eczema, etc. should not be used by another user. Store dry gloves at room
temperature in a dry location away from direct sunlight and radiant heat in a
well ventilated dry location. In the event that the gloves are contaminated by
dangerous substances or infectious material, place them into an undamaged
plastic bag and take them to the respective collection points for dangerous
and infectious materials.
CE : meets respective requirements of directive (EU) 2016/425 EU; CAT I:
only for minimal risks pursuant to (EU) 2016/425; EU declaration of
conformity: This declaration is issued under the exclusive responsibility of
the manufacturer: Madal Bal a.s., Bartošova 40/3, CZ-760 01 Zlín, Corp. ID
No.: 49433717. The manufacturer declares that the above described Extol® brand
glove product lines, as the subject of the EU declaration of conformity,
conform to the Directive (EU) 2016/425, specifying the requirements for
personal protective aids (PPA). Conformity of the above mentioned Class I PPA
(for minimum risk) with the basic requirements of the health and safety
directives have been met by means of internal production control (module A)
according to annex IV of directive (EU) 2016/425 in accordance with annex ZA
of the harmonised norm EN 420:2003+A1:2009, on the basis of which the
conformity is declared, and this for the duration of the harmonisation of this
norm; after cancellation of its harmonisation it shall conform according to
annex ZA of norm EN ISO 21420:2020.
Martin Šenkýř,
Member of the Board of the manufacturer
In Zlín: 27/04/2022 The EU declaration of conformity forms a part of the
user‘s manu- al that is available for download at the website address
presented at the beginning of the user‘s manual after entering the glove model
number.
Version 05/2022
Meaning of the used pictograms
Read the user‘s manual before using the gloves
Not intended for washing
2021/3 Year of manufacture (only where specified)