FRACARRO 270653 OPT-PDM-SCA Radio industrie SRL Instruction Manual

FRACARRO 270653 OPT-PDM-SCA Radio industrie SRL

Miniaturized passive optical receiver of the OPT series, with a wide band RF output for the reception of Digital Terrestrial and Satellite signals distributed on a single fiber. Requires no power supply, Optical input range between 0 and -6 dBm; 1270-1610nm operating optical window, RF output frequency from 88 to 2350 MHz, suitable for single-mode single-mode fiber multi-user systems, small size for easy installation. Available in two models, OPT PDM SCA with SC / APC input connector and OPT PDM MINI with MINI input connector, F Female output connector. Quick and easy installation (Plug & Play), high shielding against electromagnetic interference, possibility of housing on 503 box.

• A.Optical input Connector MINI

• B. RF Output Connector Female F

• C. fixing lugs

• Connector MINI

• A) Optical input Connector SC/APC

• B) RF Output Connector Female F

• C) fixing lugs

INSTALLATION EXAMPLE

TECHNICAL SPECIFICATIONS

| OPT PDM SCA| OPT PDM MINI
---|---|---
Code| 270653| 270654
Optical Input
Optical Connector:| SC/APC| MINI
Working Wavelength:| 1270 – 1610 nm
Operating Input Optical Power:| -6 to 0 dBm
Optical Back Reflection:| -50 dB
DMaximum Input Optical Power:| 10 dBm
RF Output
Frequency Band:| 88 to 2350 MHz
Total Output RF Level:| 68 dBµV (-6 dBm) to 80 dBµV (0 dBm)
Connector Type:| F Female
Output Impedanc:| 75 Ohm
General Features
Operating Temperature:| 0 to +40 °C
Dimensions (L.× H.× D.):| 47 x 33 x 15 mm
| OPT PDM SCA| OPT PDM MINI
---|---|---
Code| 270653| 270654
Optical Input
Optical Connector:| SC/APC| MINI
Working Wavelength:| 1270 – 1610 nm
Operating Input Optical Power:| -6 to 0 dBm
Optical Back Reflection:| -50 dB
DMaximum Input Optical Power:| 10 dBm
RF Output
Frequency Band:| 88 to 2350 MHz
Total Output RF Level:| 68 dBµV (-6 dBm) to 80 dBµV (0 dBm)
Connector Type:| F Female
Output Impedanc:| 75 Ohm
General Features
Operating Temperature:| 0 to +40 °C
Dimensions (L.× H.× D.):| 47 x 33 x 15 mm

INSTRUCTIONS FOR INSTALLATION

ATTENTION: for the OPT PDM MINI model, make sure that the fiber locking guide is in position A (see photo), when inserting the MINI connector. Once inserted, press lightly on the connector and push the fiber locking guide into position B (see photo).

CLEANING RECOMMENDATION

All optical devices require you to keep the protective caps until use. To keep the optical devices efficient, it is advisable to use colorless isopropyl alcohol with a purity greater than 98% with due caution, using a lint-free cloth. Fracarro RadioIndustrie offers an appropriate kit to carry out all the cleaning operations of the optical fiber. Cleaning kit code: 287536

SAFETY WARNINGS

• Product installation must be performed by qualified personnel in accordance with local safety laws and regulations. Consequently, Fracarro Radioindustrie is exonerated from any civil or criminal liability resulting from violations of the legal regulations in force on the subject and resulting from improper use of the product by the installer, user or third parties.
• The installation of the product must be carried out according to the installation instructions provided, in order to protect the operator from any accidents and the product from any damage.
• Installation warnings
  • The product must not be exposed to dripping or splashing water and must therefore be installed in a dry environment, inside buildings.
  • Moisture and drops of condensation could damage the product. In case of condensation, before using the product, wait until it is completely dry. Handle with Care. Improper shocks could damage the product. Leave space around the product to ensure sufficient ventilation. Excessive working temperature and / or excessive heating can compromise the functioning and life of the product.
  • Do not install the product on or near heat sources or in dusty places or where it may come into contact with corrosive substances.
  • In case of wall mounting, use expansion anchors suitable for the characteristics of the fixing support. The wall and the fixing system must be able to support at least 4 times the weight of the equipment.
  • Never look into the optical connectors of the . The laser radiation is not visible to the naked eye and therefore long-term damage cannot be prevented.
  • When working with the splitter’s optical connectors, always check that the lasers of any optical transmitters connected to it are turned off.

COMPLIANCE WITH EUROPEAN DIRECTIVES
Fracarro declares that the product complies with the directives 2014/30 / UE and 2011/65 / UE. The full text of the EU declaration of conformity is available at the following internet address ce.fracarro.com

ATTENTION:

• Invisible laser radiation.
• Do not look directly at the incoming optical fiber. The Product may be connected to a CLASS 1M laser

DISPOSAL
The indications for the treatment of WEEE waste of end-of-life equipment) are available at the web address ce.fracarro.com (type RAEE in the search field).

ABOUT COMPANY

• Fracarro (UK) – Ltd
• Suite F9A, Whiteleaf Business Centre, Little Balmer, Buckingham,
• MK18 1TF UK
• Tel: +44(0)1908 571571
• Fax: +44(0)1908 571570
• www.fracarro.com
• info@fracarro.com
• supportotecnico@fracarro.com
• chat whatsapp +39 335 7762667

FOR MORE INFO

Documents / Resources

| FRACARRO 270653 OPT-PDM-SCA Radio industrie SRL [pdf] Instruction Manual
270653 OPT-PDM-SCA Radio industrie SRL, 270653, OPT-PDM-SCA Radio industrie SRL, Radio industrie SRL, industrie SRL
---|---

References

• ce.fracarro.com
• Fracarro Radioindustrie - Soluzioni TV Satellite e Sicurezza

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>