SUNJOY GROUP A101012300 Bethlehem 13 ft. x 13 ft. Steel Gazebo Instruction Manual

June 3, 2024
SUNJOY GROUP

SUNJOY GROUP A101012300 Bethlehem 13 ft. x 13 ft. Steel Gazebo Instruction Manual
SUNJOY GROUP A101012300 Bethlehem 13 ft. x 13 ft. Steel
Gazebo

Parts List

Description Label Part# Qty Image
Post Al P00020058701 4 ![Product Parts](https://manuals.plus/wp-

content/uploads/2022/12/Screenshot_4-445.jpg) Product
Parts
Long screen| B1| P000400886| 4| Product Parts
Short screen| Cl| P000400887| 4|
Mid beam connector| D3| P000501164| 4|
Hook| El| P005800001| 1| Product Parts
Slanting beam
upper bar| Fl| P000601329| 4| Product Parts
Slanting beam
lower bar| F2| P000601331| 4| Product Parts
Middle beam| G1| P000601330| 4|
Big top
connector| H1| P000501163| 1|
Adjustable tube| I| P005700652| 8| Product Parts
Small top
slanting bar| J1| P000601328| 4|
Small top
connector| K1| P000501162| 1|
Stake plate| L| P000100324| 4|
Stake cover| M1| P006100168| 4| Product Parts
Netting bar| N1| P005700653| 8|
Arc support| 01| P005000413| 8|
Small canopy| P1| P001100534| 1|
Mid canopy| Q1| P001100535| 1|
Large Canopy| R1| P001100536| 1|
Curtain| S| P001300104| 1|
Mosquito
netting| T| P001200207| 1|

Hardware Pack 1

Label Description Part# Qty Image
AA M6X20 Bolt H100010047 32PCS
BB M6 flat washer H050030001 8 PCS
CC M6X25 bolt H100010086 16 PCS ![Hardware Tools](https://manuals.plus/wp-

content/uploads/2022/12/Screenshot_28-62.jpg)
DD| M6 nut| H040010004| 8 PCS|
EE| M6X35 bolt| H100010069| 40 PCS| Hardware Tools
FF| 06*230 floor stake| H070010001| 8 PCS| Hardware
Tools
GG| Ring| P005100264| 112PCS|
Z1| M6 wrench| H090010017| 2 PC|

Assembly Instructions

Product Overview

  1. Fig .1: Put stake cover (M1) through Post(A1) and lift up stake cover, then attach stake slate (L) to bottom of post (A1) by using bolt(AA).
    Assembly Instructions

  2. Fig.2-1: Attach short screen (C1) to long screen(B1).
    Assembly Instructions

  3. Fig.2-2: Attach middle beam lower connector(D3) to long screen(B1) and short screen(C1), by using bolt(AA)
    Assembly Instructions

  4. Fig.3: Then fix assemble screen(B1,C1) to post(A1) by using bolt(CC).
    Assembly Instructions

  5. Fig.4: Attach netting bar(N1) to long side screen and (B1) and short side screen (C1), by using bolt (AA).
    Assembly Instructions

  6. Fig.5: Attach arc support(O1) to post(A1) and across screen(B1, C1),by using bolt(EE).
    Assembly Instructions
    Assembly Instructions

  7. Fig. 6 :Insert the inclined beam down tube (F2) into the inclined beam (F1) and snap the spring buckle on the inclined beam down tube (F2) to the inclined beam (F1) Fixed in the hole position.
    Assembly Instructions

  8. Fig.7 : Insert slanting beam(F1) into big top connector(H1).
    Assembly Instructions

  9. Fig.8: By using bolt(EE),washer (BB),nut(DD), attach slanting beam lower bar(F2) to post (A1).
    Assembly Instructions

  10. Fig.9: Insert middle beam(G1) to big top connector(H1). Then screw the hook(E1) to big top connector(H1).
    Assembly Instructions

  11. Fig.10: By using bolt(EE), washer(BB),nut(DD),attach middle beam(G1) to middle beam connector(D3).
    Assembly Instructions

  12. Fig.11: Insert small top slanting bar(J1) into small top connector(K1).
    Assembly Instructions

  13. Fig.12: Put large canopy(R1), middle canopy(Q1) on top. Then insert assembled small top slanting bar(J1) into big top slanting upper bar(F1).
    Assembly Instructions

  14. Fig.13-1、Fig.13-2: Attached the adjustable tube(I) to bottom of big top slanting beam upper bar(F1) and bottom of small top slanting bar(J1), adjust the length shortest.
    Assembly Instructions
    Assembly Instructions

  15. Fig.14: Fix small canopy four corner(P1) to adjustable tube(I),then adjust length till canopy tight.
    Assembly Instructions

  16. Fig.15: Fix middle canlpy four corner (Q1) to big top slanting beam upper bar ( F1 ) ,then adjust middle top end tube till middle canopy tight.
    Assembly Instructions

  17. Fig.16 : Fix big canopy four corner(R1) to big top slanting lower bar(F2,)then adjust big top end tube till canopy tight.
    Assembly Instructions

  18. Fig.17: By using ring(GG) hang mosquito netting(T)on netting bar(N1); by using ring(GG) hang curtain(S) on screen tube (B1,C1).
    Assembly Instructions

  19. Fig.18 : By using stake(FF) fix assembled gazebo on ground.
    Assembly Instructions

Care and Maintenance

  • Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is not a defect and thus not covered by the warranty.
  • To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint. Should any scratching or damage occur, we recommend immediate touch‐up with rust inhibiting paint.
  • Surface rust can also be easily removed with a very light application of common cooking oil. If surface oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping on to deck or patio and caused damaging stains, which may be difficult to remove. This can be prevented if the above‐mentioned measures are taken to keep the product from oxidizing.
  • Use damp cloth to wipe off the stains as quickly as possible.
  • If necessary, wash with a mild solution of soap and water; rinse thoroughly and dry completely.
  • Periodically check and ensure that all bolts are well‐tighten during use.

Limited Manufacturer’s Warranty

Sunjoy Group warrants to the original purchaser that this item is free from defects in workmanship and materials for a period of 1 year from the date of purchase, provided the item was factory‐sealed at the time of purchase and is maintained with care and used only for personal, residential purposes. Should any manufacturing defect arise within this warranty period, Sunjoy Group will replace (at our option) any defective merchandise or parts upon proof of purchase; however, transportation and delivery costs, as well as payments to a third party for assembly or disassembly of the item, remain the responsibility of the purchaser. A purchaser of an “open box,” previously‐returned, or “clearance” item, as well as original purchasers outside of the warranty period, may obtain replacement parts from Sunjoy Group for products in current production, at nominal cost.

Exclusions

Items used for commercial, contract, or other non‐residential purposes, or items damaged due to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is non‐transferable. Any replacement of warranted items will be in the original style and color, or a similar style and color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you may also have other rights, which vary from state to state.

CONTACT US

24 hours / 7 days a week
www.sunjoyonline.com
[email protected]
QR Code

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

SUNJOY GROUP User Manuals

Related Manuals