RingConn BOR-01-6 Smart Health Monitoring Ring Instruction Manual
- June 3, 2024
- RingConn
Table of Contents
RingConn BOR-01-6 Smart Health Monitoring Ring
Function Introduction
-
Records your sleep stages and scores
-
Measure your blood oxygen saturation during daily and sleep periods
-
Real-time monitoring of your heart rate around the clock
-
Monitor your daily activity and calorie burn
-
Monitoryour stress index and guide relaxation
-
Monitoryour Airway respiratory rate throughout the day
-
Record your standing time to guide a healthy lifestyle
-
Record your skin temperature changes throughout all day
-
Provide personalized health advice based on your health information
Read and Save These Safety Instructions Before Ustng This Appliance
The product contains electronic equipment. Therefore, improper disposal may
cause environmental pollution and human injury.
- Do not disassemble the product
- Do not replace the built-in battery.
- Do not use corrosive cleaning agents to clean the product.
- Do not charge the product when it is wet.
- Do not charge the product when it is not completely dry.
- Do not expose the product to direct sunlight for long periods.
- Do not use the product in a sauna or steam room.
- Do not expose the product to extreme temperatures.
- Do not use the product with a broken screen or case.
- Do not put the product in the dishwasher, washing machine, or dryer.
- Do not put the product in the fire. The battery may explode.
- Please use the USB port of the computer or phone for proper charging.
- If the product temperature rises rapidly during the charging process, please stop charging immediately.
In the Box
-
Smart Health Monitoring Ring
-
Type-C Cable
-
Smart Charging Case
-
Quick Guide& Manual Instructions
Specifications
- Product name Smart Charging Case
- Charging case capacity 5OOmAh
- Charging method/time USS Type.C & rated 5V (around 120 mins tor a full charge
- Weight (net weight) 64-grams
- Product name Smart Health Monitoring Ring
- Mode
- BOA-01-6 BOA-01-7 BOA-01.8 BOA-01-9 BOA-01-10
- BOA-01-n BOR-01-12 BOA-01·13 BOA-01-14
- Connectivity Bluetooth 5.2
- Material Titanium metal
- Weight (net weight) 3-Sgram:;
- Battery capacity 22mAh
- Charging method/time Magnetic charging (around 90 minsfor a full charge)
- Waterproof & duts proof IP68
- Battery life 57- days
- Data offline storage days
- Operating temperature -10″C -41YC/14°F-104°F
- Device Requirements Compatible with 1OS12.0+, Android 8.0+, and Bluetooth 4.0+
LED Color Reference
Smart Ring
B1inking blue:
The ring is activated and enters pairing mode
Charging Case
Breathing white: The ring is charging
Solid white: Charging case Ver is above 40%
Solid orange: Charging case power is lower than 40%
- Solid blue on for 5 sec The ring is charging
- Blinking orange:
Abnormal charging (input or output)
Medical Disclaimers
Warning:
This product is not a medical device;
RingConn and RingConn App should not be used to diagnose,
treat, cure or prevent any disease or medical condition.
Please consult a doctor before adjusting your exercise, sleep, or diet plan.
Safety Information:
-
Consult your doctor if you have any existing health conditions that may be affected by the use of this product
-
Prolonged use of the product may cause skin irritation in some users.
Please consult your doctor if you have any redness, itching, or other over- allergy symptoms. -
Please adjust the ring to a suitable tightness to avoid poor blood flow.
-
Do not touch the product while driving or ln similar situations that require concentration.
-
This product is not a toy and is unsuitable for children. It contains small parts, if swallowed, may cause choking. Please place it out of the reach of children.
-
The performance of this product may be affected by external factors. Please do not expose the ring to extreme or bright light environments. The data provided by this product is for reference only.
-
This product is designed to record your heart rate, Oxygen Saturation, sleep, and other functions; if VI/Orn for a long time, it may cause skin discomfort or allergies.
-
Do not pierce the ring. It may cause a short circuit.
-
Consult your doctor before use if you are in the following situations
- Poor circulation or abrasions
- Taking any photosensitive medication
Use, Care, and Maintenance
- The size of your finger will change slightly throughout the day, so if it is difficult to remove it, try the following methods:
- Use cold water and gentle soap to -.vet your finger, and slowly twist the ring to remove it.
- Raise your hand above your heart and try to remove it after your blood pressure has dropped.
- If you are unable to remove the ring yourself in an emergency, seek immediate medical attention.
- The ring to avoid wear and tear when performing strength training, using other heavy tools, or holding other metal.
- Avoid using the product in the shower, bath, swimming, diving, and in hot and humid environments.
- When using the product, do not apply too many skin care products to the ring-wearing part of the finger to avoid surface corrosion.
- Clean the ring regularly with water and gentle soap, and wipe the ring with a soft cloth, paying attention to the areas in contact with the skin.
- Remove the ring from time to time to allow your skin to breathe, and you can use this time to recharge your ring.
Troubleshooting
Ql. The ring does not work properly
- Please put it into the charging case to activate it before the first use.
- Please put it into the charging case, and check if the ring has a blue light flashing.
- Please open the app and check whether the ring can be connected to it normally.
Q2. Unable to connect the ring to the app (The ring and the app are not connected)
- Please ensure your device’s Bluetooth is enabled and check if it can connect to the network properly.
- Please put the ring into the charging case and check whether it has insufficient power.
- Please keep the ring and the device within a range meter for binding.
Q3. Manual detection failure
- Please choose the right size. The sensor inside your ring should be on the palm side of your finger. The ring should fit securely and comfortably around your finger’s base.
- Please keep your body still during the manual detection.
- Please ensure that the ring and the app are well connected during the manual detectlon.
Q4. Data missing
- Please choose the right size. The sensor inside your ring should be on the palm side of your finger. The ring should fit securely and comfortably around your finger’s base.
- The ring can store data for 5-7 days. Please ensure your device’s Bluetooth is enabled when you open the app; the most recent s-7 days of data will automatically synchronize.
- The ring’s data will be cleaned when the binding account is modified.
FCC
Fe FCC ID: 2A854JZBOR·Ol
This device complies with part 15 of the FCC rules . Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Oass B digita1 device, pursuant to parts of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used In accordance wfth the
Instructions, may cause harmful Interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
This symbol means that according to local laws and rcqulations your product
and/or its battery shall be disposed of separately from household v..-aste.
When this product reaches its end of life, user has the choice to give his
product to a competent recycling organization. Proper recycling of your
product will protect human health and the environment.
Warranty
Ringconn LLC provides al year warranty for your Ringeonn Smart Ring. To
register your product for warranty please visit
www.ringconn.comwarranty-policy/Filing for a warranty claim will require: A copy of the purchase
receipt from an authorized retailer.
For general support or inquiries please contact us at
support@ringconn.com
Manufacturer. Guangdong Jiu Zhi Technology Co, Ltd. Address: Room 411-18, F1oa
4, Building C, lnnoation Center Plant, N0.34,XiangShan Avenue, Cuiheng New
District. Zhongshan City.
Official website: wwwringconn.can
Email support@ringconn.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>