V-TAC VT-4051 Ultra Slim LED Floodlight Instruction Manual
- June 4, 2024
- V TAC
Table of Contents
V-TAC VT-4051 Ultra Slim LED Floodlight
TECHNICAL DATA
INTRODUCTION
WARRANTY
If you have any anoth-er query, please contact our dealer or local vendor
from whom you have purchased the product. They are trained and ready to serve
you at the best. The warranty is valid for 2 years from the date of purchase.
The warranty does not apply to damage caused by incorrect installation or
abnormal wear and tear. The company gives no warranty against damage to any
surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a
day would void the warranty. This product is warranted for manufacturing
defects only.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Terminal block not included.
- Proper grounding should be ensured throughout the installation.
This marking indicates that this product should not be disposed of with other household wastes.
Caution
Risk of electric shock.
Non replaceable control gear Non replaceable light source
INSTALLATION DIAGRAMS AND INSTALLATION INSTRUCTION
- DO NOT USE IN AREAS WITH LIMITED VENTILATION OR OUTSIDE THE RATED AMBIENT TEMPERATURE RANGE.
- CONNECT WITH WATERPROOF CABLE HOUSE ONLY. *ENSURE ELECTRICITY IS SWITCH OFF BEFORE INSTALLATION.
- Please do not mount to a surface that is prone to vibrations.
- Remove the screw and the bracket afterward.
- Before drilling, mark the hole position for fixing the bracket onto the wall Screw not supplied.
- Screw the retaining bracket to the wall with a suitable quantity of.
- Mount the bracket back to the fixture.
- Adjust the floodlight according to the desired position.
- Tighten the screw.
- Connect your main cable H05RN-F3G1.0mm2
- Recommended with the input lead of our prod-uct through the waterproof junction box.
- Note the line of the lead.
- Need to use the junction box of IP65 or above, ensure to tighten the waterproof screw
- Switch on the power to make sure if the product is working.
- Adjust the direction angle as per your preference.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>