Enjoy Technology 206305306215 Buzzer Clicker Galaxy Audience Response System User Manual
- June 3, 2024
- Enjoy Technology
Table of Contents
Enjoy Technology 206305306215 Buzzer Clicker Galaxy Audience Response
System
System Overview
Wireless Buzzer 206 is a stand-alone version, which is an easy-to-use response system with smart buttons.
Product list and image
| item | Quantity pc(s) |
|---|---|
| Buzzer | 1 set: 1-8 |
| Master controller | 1 |
| User guide | 1 |
| adapter | 1 charger for 4 buzzers |
Specifications
Size: Controller: 4.9X10.4X1.5CM;
| Buzzer: diameter 5CM，height 3.1CM | |
|---|---|
| Range | 360 degree |
| Distance | < 10 meters |
| Battery/recharge | Master controller: 2 AAA battery |
buzzer: rechargeable lithium battery
Note:
- Insert dry batteries correctly by matching the (+/-) markings
- Remove the dry batteries when they are depleted or not using the system for a long period of time.
- For rechargeable batteries, when recharging, the red indicator light comes on. After fully charged, the green light indicator light will come on.
- Step 1– turn on the system. Press the “Power” button on the master controller and press the push button on the buzzer toopen the system, the buzzer’s light will glow to show the battery life, then turn to red.
- Step 2– start an activity. Press the “Start” button on the master controller, and the controller indicator will twinkle green, and the buzzer light turns to green. Then all players can press the push button for the rush. The first one who pressed the push button, his/her buzzer will flash with blue light, buzz audio will play from the buzzer as well and the LCD screen will show the ID of who buzzed in. Other buzzers will turn the red light on and lock out.
- Step 3— continue. Press the “Continue” button on the master controller, other players can press the push button and answer the quiz in the same way.
- Step 4—stop. Press the “Stop” button on the master controller, and all buzzer lights will turn red, and all players can’t press the buzzer buttons anymore.
- (Repeating the above steps can start a new activity).
- Step 5— Power off. Press the “Power” button on the master controller. All buzzers will power off accordingly.(Cube buzzer and Tower buzzer press power switch to power off)
-
Battery life testing
Press the ‘Battery’ button on the master controller, then all buzzers will show a light color:
Cyan: full battery（voltage>=3.9V）
Blue: (Voltage:3.7～3.5V)
Yellow: （3.5～3.2V）
Purple/Red:（ <=3.2V）
-
Note and troubleshoot
-
If the buzzer brightness is not obvious or when pressing the ‘Battery’ button glows red/purple, please recharge.
-
If the buzzers are red and green light flashes, means the buzzer is searching signal. If the buzzer is always searching signal, please check the master controller is on.
-
If the master controller can’t control the buzzer, please program the buzzer with the master controller. (See below for how to program.)
-
Other features–Set ID No.
-
Note: ID No. already set by the factory, if need changes it, please follow the below steps.
-
Set ID No.(Program)
Press the “Mode” button switch to set Buzz Id ( in LCD screen will show this icon ), and press “Next No.“ /“Previous No.” button to select the number, and then, press “Start” . At the same time, press pushes button 3 times quickly, then the buzzer green light flashes, and the master controller display “ok”. (Remark: After setting ID No. Press the ‘Mode’ button again, and switch to the normal mode.)
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>