Pioneer Car Electronics TS-WX010A 6-5/8″ x 3-1/8″ 160 W Max Power User Guide

: June 4, 2024
: Pioneer Car Electronics

Table of Contents

Pioneer Car Electronics

Pioneer Car Electronics

Pioneer Car Electronics TS-WX010A 6-5/8″ x 3-1/8″ 160 W Max Power

Specifications

BRAND: Pioneer Car Electronics
MODEL NAME: Compact Series
SPEAKER TYPE: Subwoofer
CONNECTIVITY TECHNOLOGY: RCA
RECOMMENDED USES FOR PRODUCT: Car
MAX POWER: 160 W
RMS: 50 W
PRODUCT DIMENSIONS: 4.63 x 9 x 2.75 inches
ITEM WEIGHT: 3.31 pounds

Introduction

The TS-WX010A compact-powered subwoofer is the ideal upgrade for many of today’s vehicles, especially EVs (electric vehicles) and gasoline/electric hybrids where low weight, small size, and low power consumption are priorities. It is compact in size but capable of producing powerful and impactful bass. The TS-WX010A is the smallest and lightest powered subwoofer in the Pioneer portfolio and has been designed to fit in the passenger side footwall. It is only 9 inches wide, 4-5/8 inches deep, and 2-3/4 inches high, and weighs just under 3-1/2 pounds.

WHAT’S IN THE BOX

Compact Powered Subwoofer
Mounting Brackets
Screws
(2) Floor Mounting Brackets
Wire Harness
Cushion Tape
10A ATO fuse installed on power wire
Installation Manual
1 Year Warranty Sheet

HOW A POWERED SUBWOOFER WORKS

Using a magnetic coil to produce cone vibration in the driver, the subwoofer amplifies the electricity and turns it to sound. Low frequency sound waves are generated by this vibration and are propagated through the atmosphere.

HOW TO ACTIVATE

The connection between your subwoofer and home entertainment receiver is straightforward: Simply connect this audio connector cable between the subwoofer’s line input and the receiver’s subwoofer output (pictured above). Use the LFE input if it is available on the subwoofer.

HOW TO ADJUST

Power up the subwoofer and adjust the volume to your preferred level. If a phase control is available, adjust it. The delay between the subwoofer and the main speakers is made up for by the phase control. Phase control should be set to 0 or normal to begin with.

HOW TO USE

If LFE isn’t enabled, connect your subwoofer straight to your main speakers. The subwoofer should be connected to your amplifier/output receiver’s first. After that, link the speakers and sub. It’s crucial to connect to the subwoofer first, especially if it comes with an integrated crossover.

HOW TO ADJUST THE VOLUME

You can change the volume to get stronger (or softer) bass from your subwoofer. Depending on your model, there are different ways to accomplish this. The WOOFER button on the majority of sound bar remote controls allows you to change the volume from -6 to +6. (When compared with the volume of the rest of the sound from the other speakers).

Frequently Asked Questions

Why doesn’t my powered subwoofer function?

Checking the fuse should be your first step if your subwoofer stops working. Replace it if it is blown and check to see if the issue is resolved. If it doesn’t, there can be another issue with the subwoofer, in which case you’ll need to have an expert fix it.

Can a subwoofer handle a lot of power?

The majority of subwoofers need between 150 and 1000 watts to recreate the sound they are receiving. Although the power can be raised by adding an amplifier, it is advisable to stick with speakers that only need around 20 watts if you only want something tiny and portable.

How can I tell if my subwoofer is functioning?

To determine whether your sub has blown, test the sound at a low volume. You have a partially blown subwoofer if the sound is distorted and a fully blown subwoofer if there is no sound at all. Before jumping to conclusions, check the cable if the subwoofer is receiving its signal through one.

What dB should my subwoofer be tuned to?

Calibrate each speaker to approximately the same volume using the internal test tones (use 75dB as a reference). If you want a little extra bass effect, it’s acceptable to increase the sub level by a couple of db. So don’t worry about setting your sub to, say, and 75dB if you set all of your speakers to that level.

Can I connect the pre out of my subwoofer?

There are several alternative connection possibilities, for instance, when attaching your subwoofer via a pre-out. If there are several sub inputs, you can alternatively utilize an RCA cable and Y-Splitter instead of a single tip RCA cable. Even a dedicated subwoofer wire is offered by some businesses.

Your battery may be drained by subwoofers.

If you’re not careful, a subwoofer can quickly drain your battery because it consumes a lot of power. Make careful to turn off your woofers when not in use to prevent this issue with both the ones in your car and the ones that are housed inside your home’s speaker cabinet.

What gives a subwoofer its strength?

The subwoofer in question’s wattage determines its power; a higher wattage indicates a more potent subwoofer.

What is the amp usage for a subwoofer?

Subwoofers and speakers with an amp draw of between 5 and 10 are a necessary component of a good stereo system. Stereos are not created equal, though. The amount of electricity your car stereo uses may vary depending on the volume of the music you are listening to.

What is the lifespan of a subwoofer?

A subwoofer can last anywhere from 5 to 14 years. The average person should be able to get 10+ years out of their subwoofer if it is well-maintained and not misused.

What is the ideal location for a subwoofer?

The output of a subwoofer may rise if it is placed in the corner of a room, making the sub sound louder. See how it sounds by trying to position your subwoofer in a corner. If the corner is too distant from your listening location, it might not be a good alternative for your subwoofer depending on your floor space.