GEBERIT CT449CFG GPF Dual Flush Square Toto Toilet in White Concealed Tank Installation Guide

GEBERIT CT449CFG GPF Dual Flush Square Toto Toilet in White Concealed Tank

PRODUCT SPECIFICATIONS

In-Wall Duofix carrier system and Sigma concealed tank with actuator flush panel or pneumatic push button for wash down wall hung toilets. System shall fit within minimum 31/2” (90 mm) framing wall or plumbing chase, with wood construction or steel framing members placed 193/4” (500 mm) apart. Framing members should be capable of supporting a 880 pound (400 kg) load without damage to the wall. Water supply shall have flow diameter no smaller than 1/2” (13 mm) copper tube, and a minimum flow pressure of 2 PSI (0.01 MPa). The toilet bowl shall be a third party listed, 2-hole wall-hung 1.6 GPF (6 LPF) or 1.28 GPF (4.8 LPF) single-flush, 1.6/0.8 GPF (6/3 LPF) or 1.28/0.8 GPF (4.8/3 LPF) dual flush. The carrier frame shall be adjustable for bowl rim heights from 15” to 19” (381 to 483 mm). Actuator flush panels shall be die cast zinc, molded plastic or fabricated stainless steel and plated to preserve material integrity. All components shall be compliant with applicable codes and product standards.

FEATURES

• Water consumption – Dual-flush system, 1.6/0.8 GPF (6/3 LPF) or 1.28/0.8 GPF (4.8/3 LPF) Anti-siphon fill valve
• Impact resistant high density polyethylene (HDPE) tank, insulated to prevent condensation
• 16-gauge, powder-coated, structural steel tubing rated to 880 lbs. (400 kg) without damage to finished wall or carrier unit
• Bowl rim height adjustments from 15” to 19” (381 to 483 mm)
• 49” (1245 mm) frame height
• For finished walls up to 31/2” (9cm) thick
• For use with Geberit Sigma actuator plates (not included)
• Includes installation and rough-in materials
• Complies with the latest editions of:
• ASME: A112.6.2, A112.19.5, A112.19.14
• ANSI Z124.4
• CSA B125.3
• ANSI/ASSE 1002
• IAPMO PS-50
• UNAR / UNAR-HET
• ASME A112.19.2
• This concealed tank is WaterSense® listed or compliant when used in combination with the toilet bowl models listed on page 3 of this sheet
• State of Massachusetts listed

WARRANTY

• Limited lifetime warranty on tank and carrier, 10-year warranty on fill valve and flush valve. One-year warranty on actuator flush plates.

Products marked with  comply with the
American Disabilities Act (ADA) when installed per
the requirements of the latest ADA Accessibility
Guidelines (ADAAG) and/or ICC/ANSI A117.1.

Where water closet grab bars are required and corresponding reinforcement provided as outlined in the latest NYC Building Code and Federal FHA Guidelines, the installed product complies both for grab bars installed at the time of initial construction as well as for grab bars planned for future installation.

DESCRIPTION

GEBERIT INSTALLATION SYSTEM

For 1.6/0.8 GPF (6/3 LPF) and 1.28/0.8 GPF (4.8/3 LPF) Wall-Hung Toilets, 2×4 Installations
COMPATIBLE 1.28/0.8 GPF (4.8/3 LPF) WALL-HUNG TOILET BOWL MODELS

WATERSENSE LISTED EPA HIGH EFFICIENCY COMPATIBLE 1.28/0.8 GPF (4.8/3 LPF) WALL-HUNG TOILET BOWL MODELS

COMPATIBLE 1.6/0.8 GPF (6/3 LPF) WALL-HUNG TOILET BOWL MODELS

**WATERSENSE LISTED EPA HIGH EFFICIENCY COMPATIBLE  1.6/0.8 GPF (6/3 LPF) WALL-HUNG TOILET BOWL MODELS

**

• Consult toilet manufacturers for up-to-date model numbers and availability.
  ** Meets 600 grams MaP performance score.
  *** Meets 800 grams MaP performance score.

FEATURES

SP Bowl

• DYNAMAX™ TORNADO FLUSH® system, high efficiency (1.28GPF/0.9GPF)
• CEFIONTECT® ceramic glaze – prevents debris, mold from sticking to ceramic surfaces
• Universal Height
• Square shape front bowl

SoftClose Seat

• Square shape closed front toilet seat and cover with SoftClose hinge system

• Mounting hardware included

• Made from urea-resin

• Quick release hinges for easier cleaning

DuoFit In-Wall Tank

• High-efficiency dual flush 1.28 & 0.9 GPF (4.8 & 3.4 LPF) Avg. flush 1.03 GPF
• Adjustable 15″-19″ mounting height
• Saves up to 9″ of floor space compared to standard floor-mounted toilet
• Supports up to 880lbs
• Commercial 2″ x 6″ or optional residential installation with 2″ x 4″ wall studs with waste outlet kit
• Copper supply line

Push Plate

• Basic Square Push Plate – YT920#WH (White Matte) or YT920#MS (Matte Silver)

KIT COMPONENTS

• CT449CFG#01 SP Wall-Hung Toilet
• WT172M In-Wall Tank System (Copper Pipe)
• SS249#01 SP Slim Square SoftClose Seat
• YT920#WH Basic Square Push Plate – White Matte
  or
  YT920#MS Basic Square Push Plate – Matte Silver

COLORS/FINISHES

• Standard #01 Cotton

DYNAMAX TORNADO FLUSH
CEFIONTECT

CODES/STANDARDS

• Meets and exceeds:
  • Bowl: ASME A112.19.2/CSA B45.1, ASME A112.19.14
  • Carrier System: ASME A112.6.2
  • Tank Trim: IAPMO PS50, CSA B125.3, ASSE1002
• Certifications: IAPMO (cUPC), EPA WaterSense State of Massachusetts, City of Los Angeles and others
• Legislative compliance: California AB715, California Green Building Code, City of Los Angeles Water Efficiency Ordinance
• Code Compliance: UPC, IPC, NSPC, NPC Canada, and others

PRODUCT SPECIFICATIONS

(4.8LPF & 3.4LPF)
Flush System| DynaMax™ TORNADO FLUSH®|  | DUAL-MAX
Min. Water Pressure| 8 psi (static)|  | 8 psi (static)
Water Surface| 5-1/2” X 4-1/8”|  |
Trap Diameter| 2-1/8″|  |
Installation Height| 15” to 19”|  | 15” to 19”
Trap Seal| 2-1/8”|  |
Warranty| One  Year Limited Warranty| One  Year Limited Warranty| One Year Limited Warranty
Material| Vitreous China| Urea-Resin| Various
Shipping Weight| 68 lbs| 9 lbs| 38 lbs
Shipping Dimensions| 22” L x 14.6” W

x 16.5” H

| 20-5/8” x 19-1/8” x 3-1/4”| 48” L x 26-1/2” W x 6” H

INSTALLATION NOTES

• Adequate structural bracing is required
  

CT449CFG
This universal height, square shaped front bowl, high efficiency DYNAMAX TORNADO flushing system toilet shall be 1.28GPF & 0.9GPF. Toilet shall have CEFIONTECT® ceramic glaze. Toilet requires in-wall tank system and wall- mounted push-button type trip lever. Toilet shall be TOTO Model CT449CFG#01.
SS249
Seat shall be made from urea-resin for both the seat and seat cover. The seat installation is top mount installation with adjustable hinge plates and stainless steel hinge caps.
WT172M
This universal height, high-efficiency, dual flushing, in-wall tank system toilet shall be 1.28GPF & 0.9GPF. Requires TOTO toilet model CT449CFG and wall-mounted push plate. In-Wall tank system shall be TOTO Model WT172M.
YT920
Dual button push plate required. Basic Wall comes in two options, White Matte or Matte Silver.
CT449CFG

SS249

**PRODUCT DIMENSIONS

**

WT172M

GEBERIT SIGMA01 ACTUATORS

SPECIFICATIONS

Actuators for concealed tank and carrier system. Actuator flush plates and push buttons shall be molded plastic and plated to guard against scratches. All components shall be compliant with applicable codes and product standards.

Dual-Flush Actuators, Sigma 2×6 and 2×4 Installation

Style| Material| Finish| Model No.
Sigma01
| Plastic| Alpine White| 115.770.11.5
Polished Chrome| 115.770.21.5
Matte Chrome| 115.770.JQ.5
Brass Galvanized NEW!| 115.770.DT.5
Jet Black NEW!| 115.770.DW.5

FEATURES

• Designed to maintain appearance push after push

• Moving parts are accessible behind actuator flush plate

• Made of molded plastic and plated

• Available in a variety of unique combinations of finish/color

• Incorporates water saving possibilities when used with Geberit dual-flush tanks
  1.6 GPF (6 LPF) and 0.8 GPF (3 LPF) or
  1.28 GPF (4.8 LPF) and 0.8 GPF (3 LPF)

• Includes mounting frame and hardware
  

WARRANTY

• One-year limited warranty

Products marked with comply with the American Disabilities Act (ADA) when installed per the requirements of the latest ADA Accessibility Guidelines (ADAAG) and/or ICC/ANSI A117.1.

Geberit
2100 S. Clearwater Drive
Des Plaines, IL 60018
USA
P 847-803-7777
F 847-849-1845
www.geberit.us

References

• Geberit - European market leader for sanitary products | Geberit North America

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>