YEAZ TWEAK-X Premium Ski and Snowboard Goggles Instruction Manual

: June 3, 2024
: YEAZ

Table of Contents

YEAZ TWEAK-X Premium Ski and Snowboard Goggles
PRODUCT FEATURES
Documents / Resources

YEAZ TWEAK-X Premium Ski and Snowboard Goggles

PRODUCT FEATURES

Double-layer, high-quality special glazing with anti-fog function (Made in Italy) for clear vision.
Excellent UV and glare protection according to EN 174.
Powerful ventilation system with airflow at the top and bottom.
Convenient magnet technology for easy lens replacement.
Flexible frame made of windproof TPU for an ideal fit.
Three-layer foam for long-lasting comfort.
Headband with non-slip silicone coating.

SAFETY INSTRUCTIONS

Please read the following instructions carefully.
These goggles are not intended for protection against collisions with hard objects or contact with chemical substances or for use in road traffic.
Always store your YEAZ ski and snowboard goggles in the case provided. Any scratches can lead to impaired vision. In this case, the lenses should be replaced.
Check the ski and snowboard goggles before each use. If the product is defective, do not use it again and only use original spare parts.
Not suitable for looking directly into the sun and for protection against artificial sources of radiation, such as solariums.

STORAGE
The ski and snowboard goggles should be dried at room temperature and not exposed to temperatures above 50°C. Always store your YEAZ goggles in the case provided. The impact-resistant design with mesh insert provides protection and optimum ventilation.

CLEANING

Only clean the glasses with the cloth provided or with water. Do not use abrasive or aggressive cleaning products, solvents, or household cleaners as these may affect the physical properties of the glasses.
If snow gets into the glasses, please shake it out carefully to avoid scratches.
The inner lens has a special coating that prevents the goggles from fogging up and allows for clear vision. However, fogging may occur in humid conditions or when touched. In this case, only use the cloth provided.

CHANGING THE LENSES
Thanks to the advanced magnetic technology, the lenses can be conveniently detached and inserted.

YEAZ TWEAK-X Premium Ski and Snowboard Goggles 1

Open the fasteners on the right and left of the lens.
release the lens from the magnetic grip and remove it.
Insert the replacement lens. The magnetic technology fixes the lens in the correct position.
Close the fasteners on the sides.

DISPOSAL INSTRUCTIONS
Dispose of the item and packaging materials in accordance with current local regulations.

WARRANTY

The manufacturer‘s warranty for the TWEAK-X ski and snowboard goggles is 2 years. Scratches are excluded from this.

MANUFACTURER

VEHNS GROUP GmbH
Theatinerstrasse 40-42
80333 Munich, Germany
service@vehnsgroup.com
www.vehnsgroup.com , www.yeaz.eu
Subject to alterations and errors
The manufacturer accepts no liability for damage caused by incorrect, improper or incompatible use of the product. © VEHNS GROUP GmbH Version 1.0 – 08/2021.

VEHNS GROUP GmbH
Theatinerstraße 40-42, 80333 Munich, Germany
www.vehnsgroup.com

Documents / Resources

| YEAZ TWEAK-X Premium Ski and Snowboard Goggles [pdf] Instruction Manual
TWEAK-X, Premium Ski and Snowboard Goggles, Snowboard Goggles, Premium Ski, TWEAK-X, Goggles
---|---