EMERSON Daniel Gas and Liquid Ultrasonic Flow Meters User Guide
- June 3, 2024
- Emerson
Table of Contents
EMERSON Daniel Gas and Liquid Ultrasonic Flow Meters
Software License Agreement
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE INSTALLING AND USING THE SOFTWARE. IF YOU DO NOT AGREE WITH THE TERMS OF THE AGREEMENT, YOU ARE NOT PERMITTED TO USE THE SOFTWARE AND MUST RETURN THE SOFTWARE AND INSTALLATION GUIDE TO THE PLACE WHERE YOU OBTAINED IT, IF APPLICABLE.
Daniel Measurement and Control, Inc. (“DANIEL”) provides this software
(“Program”) and installation guide (collectively, “Daniel MeterLink(TM™)
product”) for your use. You assume responsibility for the acquisition of a
machine(s) and associated equipment compatible with the Program, and for
installation, use, and results obtained from the Program. DANIEL grants to you
a nontransferable, non-exclusive license to: (a) install and use the Program
provided to you to run on any number of your machines and (b) copy the Program
for backup purposes. You must reproduce and include the copyright notice or
any other proprietary notice on any copy of the Program. YOU MAY NOT REVERSE
ENGINEER, USE, COPY OR MODIFY ANY PROGRAM OR RELATED MATERIALS OR ANY COPY OR
MODIFICATION, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED FOR IN THIS
LICENSE.
IF YOU TRANSFER POSSESSION OF THE DANIEL METERLINK(TM) PRODUCT OR ANY COPY OF
THE DANIEL METERLINK(TM) PRODUCT TO ANOTHER PARTY, WITHOUT DANIEL’S PRIOR
WRITTEN CONSENT, YOUR LICENSE IS AUTOMATICALLY TERMINATED. No license, express
or implied, is granted under any intellectual property directly or indirectly
owned by DANIEL which does not specifically read on the Daniel MeterLink(TM™)
product as provided hereunder, nor shall any license, except the license
specifically granted herein, be implied in law, implied in equity, or exist
under the doctrine of patent exhaustion. The
Daniel MeterLink(TM™) product accompanying this Agreement whether on disk,
downloaded or on any other media or in any other form are licensed, not sold,
to you by DANIEL for use only under the terms of this Agreement, and DANIEL
reserves all rights not expressly granted to you. The terms of this Agreement
will govern any software upgrades provided by DANIEL that replace and/or
supplement the original Daniel MeterLink(TM™) product, unless such upgrade is
accompanied by a separate license in which case the terms of that license will
govern.
-
TITLE AND COPYRIGHT: Title to and ownership of the Daniel MeterLink(TM) product shall at all times remain with DANIEL or its licensors and is protected by United States copyright laws and international treaty provisions. Your right to use the same is at all times subject to the terms and condition of this Agreement. DANIEL may, from time to time, revise or update the program and/or installation guide and, in so doing, incurs no obligation to furnish such revisions or updates to you.
-
TERM: You may terminate this license at any time by destroying the media on which the Program was furnished and the installation guide together with all copies in any form. In addition, the Program installed on the machine(s) must be uninstalled or rendered unusable. This license will also terminate upon conditions set forth elsewhere in this Agreement or if you fail to comply with any term or condition of this Agreement. You agree upon such termination to destroy the media on which the Program was furnished and the installation guide together with all copies in any form and to uninstall or render unusable the Program installed on the machine(s).
-
LIMITED WARRANTY: DANIEL warrants the media on which the Program is furnished to be free from defects in materials and workmanship under normal use for a period of ninety (90) days from the date of delivery to you as evidenced by a copy of your invoice. However, DANIEL does not warrant that the functions contained in the Program will meet your requirements or that the operation of the Program will be uninterrupted or error free. THE DANIEL METERLINK(TM™) PRODUCT IS PROVIDED“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION. The above Limited Warranty is void if the failure of the Program has resulted from accident, abuse or misapplication.
-
LIMITATIONS OF REMEDIES: DANIEL’s entire liability and your exclusive remedy shall be the replacement of any media not meeting DANIEL’s “Limited Warranty”. IN NO EVENT SHALL DANIEL BE LIABLE TO YOU FOR ANY DAMAGES ARISING OUT OF ANY CAUSE WHAT SO EVER (WHETHER SUCH CAUSES ARE BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT, PATENT INFRINGEMENT OR OTHERWISE), INCLUDING ANY LOST PROFITS, LOST SAVINGS OR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PROGRAM EVEN IF DANIEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY OTHER PARTY.
-
GOVERNING LAW: This Agreement, and all matters concerning its construction, interpretation, performance or validity, shall be governed by the laws of the State of Texas, excluding its conflict laws.
-
EXPORT RESTRICTIONS: You shall comply fully with all laws, regulations, decrees and orders of the United States of
America that restrict or prohibit the exportation (or re-exportation) of technical data and/or the direct product of it to other countries, including, without limitation, the U.S. Export Administration Regulations. -
U.S. GOVERNMENT RIGHTS: The Daniel MeterLink(TM™) product is provided with “RESTRICTED RIGHTS”. Use, duplication or disclosure by the U.S. Government is subject to restrictions set forth in the Federal Acquisition Regulations and its Supplements.
-
GENERAL: You may not sublicense, assign, or transfer the license or the Program and installation guide without the prior written consent of DANIEL. Any attempt otherwise to sublicense, assign or transfer any of the rights, duties, or obligations hereunder without such consent is void. THE PROGRAM IS NOT FOR USE IN ANY NUCLEAR AND RELATED APPLICATIONS.
You accept the program with the foregoing understanding and agree to indemnify and hold harmless DANIEL from any claims, losses, suits, judgments and damages, including incidental and consequential damages, arising from such use, whether the cause of action be based in tort, contract or otherwise, including allegations that DANIEL’s liability is based on negligence or strict liability. To the extent that a third party owns and has licensed to DANIEL any portion of the program, such third party owner shall be a beneficiary of this Agreement, and shall have the right to enforce its rights under this Agreement independently of DANIEL. Should you have any question concerning this Agreement, please contact your DANIEL representative or sales office. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN US WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT. YOU AGREE THAT DANIEL MAY AUDIT YOUR FACILITY TO CONFIRM COMPLIANCE WITH THE FOREGOING PROVISIONS.
Daniel MeterLink™ system requirements
Installation system requirements
Software
Windows™ 7 (Ultimate, Home Premium and Professional 32- and 64-bit editions)
Windows® 8.1 (“basic”, Pro and Enterprise 32- and 64-bit editions)
Windows® 10 (Home, Pro and Enterprise 32- and 64-bit editions)
Microsoft® Excel® 2010 through Microsoft® Excel® 2019 (inclusive). A
full/typical Office installation is recommended. In particular, the Visual
Basic for Applications feature is required. Log file(s) are CSV format if a
supported Microsoft® Excel® version is not available.
Note
Daniel CUI should not be run simultaneously with Daniel MeterLink™.
Hardware
PC with 1 GHz or faster 32-bit (x86) or 64-bit (x64) processor, and that meets
the system requirements for the operating system
One serial port available for remote/local connection (for on-line operations)
One Ethernet port available for remote/local connection (for on-line
operations)
100MB of free hard disk space
Display with at least 1024×768 screen resolution
Windows®-compatible printer (optional), and mouse (i.e. Mouse, Trackball or
Touchpad)
Install Daniel MeterLink
Procedure
Run the Daniel MeterLink installation program and follow the Installation
Wizard instructions to complete the software installation.
Note
The Daniel MeterLink installation program is available for download from the
Daniel Measurement and Control, Inc. website: http://www.daniel.com/um2.htm.
Note
The SHA-1 checksum for the Daniel MeterLink version 1.80 application installer
daniel-meter link-1.80.031.exe is F94B10EA08D20C7492CC15C9287F40EC6FA8224B.
Note
In the case of downgrading Daniel MeterLink™ to an earlier version, the system
will first force the user to uninstall the currently installed version.
Install a direct connection driver
If an Ethernet connection is unavailable, install the Daniel Direct Connection driver.
Configure a direct connection on Windows® 7
Open the Control Panel then select Small icons for View by Note: If you have a
touch screen monitor, swipe from the right edge of the monitor to display the
Start charm.
Click the Phone and Modem icon.
The Phone and Modem Options dialog appears. Select the Modems tab. Click Add
to start the Hardware Wizard.
On the first page of the wizard, select the check box “Don’t detect my modem;
I will select it from a list”. Click Next to continue.
On the second page of the wizard, select Have Disk.
Enter the installation directory for Daniel MeterLink™ under “Copy
manufacturer’s files from”: option. The default installation directory is
typically C:\Program Files\Daniel\Daniel MeterLink. Click Browse, if necessary
to search for the Daniel MeterLink™ installation directory. Click Daniel
Direct Connection. Click Open to continue.
The Add Hardware Wizard displays. Under the Models list, select Daniel Direct
Connection and click Next to continue.
Click Selected ports (only select the port you want to use to communicate with
Daniel MeterLink) > Click Next.
Click Finish to close the wizard. This completes the driver installation.
Configure a direct connection on Windows® 8.1
From the Start menu, type Control Panel and select Small icons for View by.
Note: If you have a touch screen monitor, swipe from the right edge of the
monitor to display the Start charm.
Click the Phone and Modem icon.
On the Phone and Modem Options dialog select the Modems tab. Click Add to
start the Add Hardware Wizard.
On the first page of the wizard, select the check box “Don’t detect my modem;
I will select it from a list” and click Next
to continue.
On the second page of the wizard, select Have Disk.
Enter the installation directory for Daniel MeterLink™ under “Copy
manufacturer’s files from”: option. The default installation directory is
typically C:\Program Files\Daniel\Daniel MeterLink. Click Browse, if necessary
to search for the Daniel MeterLink installation directory. Click Daniel Direct
Connection. Click Open to continue.
The Add Hardware Wizard displays. Under the Models list, select Daniel Direct
Connection and click Next to continue.
Click Selected ports (only select the port you want to use to communicate with
Daniel MeterLink) > Click Next.
Click Finish to close the wizard. This completes the driver installation.
Configure a direct connection on Windows® 10
From the Start menu, type Control Panel and select Small icons for View by.
Click the Phone and Modem icon.
On the Phone and Modem dialog select the Modems tab. Click Add to start the
Add Hardware Wizard.
Configure a direct connection on Windows® 10
On the first page of the wizard, select the check box “Don’t detect my modem; I will select it from a list” and click Next
to continue.
On the second page of the wizard, select Have Disk.
Enter the installation directory for Daniel MeterLink™ under “Copy
manufacturer’s files from”: option. The default installation directory is
typically C:\Program Files\Daniel\Daniel MeterLink. Click Browse, if necessary
to search for the Daniel MeterLink installation directory. Click Daniel Direct
Connection. Click Open to continue.
The Add Hardware Wizard displays. Under the Models list, select Daniel Direct
Connection and click Next to continue.
Click Selected ports (only select the port you want to use to communicate with
Daniel MeterLink) > Click Next.
Click Finish to close the wizard. This completes the driver installation.
Configure the Daniel MeterLink™ meter directory
Prerequisites
If the meter directory has not already been configured, Daniel MeterLink
creates two meter directory records, one for an Ethernet connection to a meter
with its DHCP server enabled, and another for a direct connection at 19200
bps.
Procedure
- Open the Meter Directory using the File>Meter Directory menu or use the Meter Directory icon .
- Create a new record by selecting Insert, Insert Duplicate, or Add from the File pull-down menu.
- Enter a meter name, short description, and meter type.
- Use the Direct, Modem, Ethernet and Ethernet 2 check boxes for the desired communication method.
- Edit the connection properties for each connection method selected by clicking the button enabled at the bottom of the dialog.
Note
Detailed context-sensitive help is displayed when F1 is pressed in Daniel
MeterLink™.
For more information: www.emerson.com
©2021 Emerson. All rights reserved. Unauthorized duplication in whole or part
is prohibited. Printed in the USA.
The Emerson logo is a trademark and service mark of Emerson
Electric Co. All other trademarks are the property of their respective
companies.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>