MTDIAG M1 Professional Diagnostic Scan Tool for BMW Motors User Guide
- June 4, 2024
- MTDIAG
Table of Contents
MTDIAG M1 Professional Diagnostic Scan Tool for BMW Motors
Product
introduction
Product description
- MDDIAG M1 is a professional diagnostic scan tool for BMW Motor, with comprehensive functions, convenient and fast use, and easy to understand operation;
- Covered BMW Motor all series: C, E, F, G, K, R, S;
- Covered BMW Motor all diagnostic functions and service functions of all system;
- Common service functions: Oil reset, Immo key, Calibrate ESA, Calibrate SAF, Calibrate headlight, Switch off transport mode, etc.
- Support standard OBDII-16 and BMW 10 PIN connector;
Specifications
App Guide
Software operating
- Hardware requirements: Phone with Bluetooth. Space disk can’t less than 3G, and RAM can’t less than 1G.
- Operating system: support Android above 4.4 .
- Network requirement: The software needs to be activated & downloaded online, so please make sure your internet is connected.
Software downloading
- Open the mobile browser, scan the QR code below and “visit”;
- Download the app and install it.
Software activation
-
First, please keep the network connection, run MTDIAG app and enter the home page of the app.
-
Click “Update” to enter the login page.
-
Please enter the product serial number and password in the password envelope and click “login”. If the product is not activated, click “yes”.
-
after the information has been committed, please login your email to activate the product.
- You will receive a activated email from the MTDIAG server.
- Please click the link to get the confirmation from the manufacturer.
Software downloads
-
After activation, please enter the MTDIAG app again to obtain the software upgrade. Please click “login” to enter the software download interface.
-
You can download the software you need.
BMW motor diagnostic connector
- BMW motor has two diagnostic interfaces, one is the standard OBDII-16 interface and the other is BMW 10 PIN connector. If it is a round head 10PIN interface, connect the VCI with the BMW 10 PIN connector and test it, as shown in the figure below:
After-sale service
- Hardware quality problems caused by non-human reasons within one year shall be repaired free of charge.
- Free software upgrade and lifelong maintenance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>