JASIWAY B2005P 1 Drawer Morandi Gray Dresser Instruction Manual

JASIWAY B2005P 1 Drawer Morandi Gray Dresser

PARTS LIST

HARDWARE LIST

ASSEMBLY

Assemble long hardware feet(P):

1. Use four pcs(E)6*20 big flat screws to install (P)long hardware feet on ⑩side cabinet bottom panel. 2.Be careful not to scratch the panel.

Assemble ⑩bottom panel, ⑬ side cabinet middle panel, ⑭ side cabinet top panel and ⑮ back panel ：

1. Use six pcs(A)cam locks, rods and two pcs(B)wood dowels to connect panel ⑩⑬⑭⑮.

Noted: The keyhole of ⑮back panel is face to the behind.

Assemble ⑨side cabinet top panel、⑮back panel、⑬ middle panel:

1. Use two pcs(A)cam locks, rods and two pcs(B)wood dowels to connect panel ⑨ ,⑬，⑮.

Assemble ⑪ ⑫side cabinet left/right side panel ⑩ bottom panel  ⑨ top panel ⑮ back panel： Please use(O) 3.5*14 self-tapping screws to fix(M)10 inch rails on ⑫ side cabinet right side panel and ⑬ side cabinet middle panel before assemble.

1. Use 12 pcs(A)cam locks ,rods and eight pcs(B)wood dowels to connect  ⑨⑩⑪⑫.
2. Use two pcs(A)cam locks, two pcs(A)rods ,two pcs(B)wood dowels to tighten up ⑪side cabinet left side panel, ⑭side cabinet top panel.

Assemble pull drawers：

1. Use eight pcs(A)cam locks, rods to install panel (18)pull drawer left side panel (19)pull drawer back panel(20)pull drawer front panel (21)pull drawer bottom panel respectively.
2. Use (O)3.5*14 self-tapping screws to fix(M)10 inch rails on panel (18)pull drawer left side panel and (24)pull drawer right side panel.

Assemble drawers:

1. Firstly,use eight pcs(C) 3.5*40 self-tapping screws to fix ⑥drawer left side panel ，⑦drawer tail panel and(23)drawer right side panel .
2. Place ⑧drawer bottom panel along the slots of ⑥drawer left side panel and (23)drawer right side panel
3. Then use four pcs(A)cam locks and four pcs(A)rods to install ⑤drawer panel.
4. Use four pcs(O) 3.5*14 self-tapping screw s to fix (M)10 inch rail s on the outside of ⑥ drawer left side panel and (23)drawer right side panel.

Assemble pull drawer panel ：

1. Use four(G)M8 mesons,four(E)6*20 big flat screws to fix two pull drawers on ⑰pull drawer panel.

Assemble side cabinet door：

1. Use eight pcs(0)3.5*14 self-tapping screws,two pcs(N)hinges to fix ⑯side cabinet door panel on the cabinet.
2. Install ⑰ pull drawer panel along the rail groove.

Lower drawer installation:

1. Use eight pcs(A)cam locks, rods to fix panel ③lower drawer left side panel、④lower drawer back panel and (22)lower drawer right side panel.

Noted: Before install lower drawer ,use(O)3.5*14 self-tapping screws to fix(M)10 inch rails on the inside of (22)lower drawer right side panel and ③lower drawer left side panel respectively.

Cabinet lower rack installation：

1. Use three pcs(J)M8 screw nuts,(G)M8 mesons,(I)half crescents,(H)straight support to fix ①panel and ② side panel,and tighten up with one pcs(K) wrench.

Noted: After the installation is complete, cover the holes with (S)φ38 round wire box.

Assemble lower drawer(step 8) short hardware feet :

1. Use six pcs(A)cam locks, rods to fix lower drawer under ①panel.
2. Install(L)M6 adjustable feet on ② side panel as shown.
3. Use two pcs(E)6*20 big flat screws to install (Q) short hardware foot under to①panel.
4. Finally,stick(R)wool pads on(Q)short hardware feet.

Install the drawer under the panel along the track as shown

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>