arzum AR5082-T SUPERSTAR PRO Hair Straightening Brush Instruction Manual
- June 3, 2024
- arzum
Table of Contents
arzum AR5082-T SUPERSTAR PRO Hair Straightening Brush Instruction Manual
- Main body
- Ceramic coated straightening bristles
- Anti scald teeth
- Temperature displays (140-160-180-200-220o)
- Temperature adjustment
- On / Off button
- 360o Rotating Cable Entry
Thank you for purchasing Arzum brand hair straightening brush. We wish this product to make life easier for you, as with other Arzum products offered to you. Arzum Superstar Pro Hair Straightening Brush spreads stable heat on adjusted level and protects natural moisture of hair. It penetrates into hair tissues rapidly; it is professionally preferred for a rapid and easy usage. Your brush quickly heats up and you can use it in order to obtain the soft and curl-free styles.Its ceramic coated bristles make hair shinny and frizz-free. In order to obtain utmost output from your appliance, please read carefully this user’s manual and save it for further use.
IMPORTANT SAFEGUARDS
Make sure that the voltage indicated on the Arzum Superstar Pro Hair Straightening Brush corresponds with the mains voltage in your home. Our company shall not be held liable for any failures owing to any discrepancy and such failures shall not be covered by the guarantee.
- Your device is for household use only, not for commercial or industrial usage. Otherwise, inconvenient uses shall not be covered by the guarantee.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensor your mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
- If this appliance is used in the bathroom, the device must be removed from the power source after using, because it might be dangerous in the near of water.
- The rating of residual current device RCD to be installed. It should have a cut-off current of not more than 30 mA. Ask a service agent or a similar qualified person.
- Do not use this appliance near bath tubs, wash basins, showers or other vessels containing water. Never place the appliance in water!
- Do not use the extension cables which provide insufficient current not to damage your appliance.
- Do not handle your machine which is dropped into water or any other liquid, disconnect from the outlet and before using again take it to Arzum Authorized Service to be controlled.
- NEVER use your appliance with wet hands and bare foot.
- Keep the cord of your hair sstyler away from the heating sections during and after use.
- If the cord or plug of your appliance is broken, or if it is damaged because of dropping or any other reason, then do not open inside and do not attempt to repair it yourself. In case of any failure, take it to Arzum Authorized Service. Care that for using the only original spare parts.
WARNING: Because the plates of your appliance warm up very much, take it away from your hand, eye, ear and face and do not allow contact your neck part. Keep only the handle and the hand-safe area.
- When the appliance is hot, when it operates or attached to the outlet, do not leave it on the surfaces which are not resistant to temperature such as wood, plastic, textile etc.
- Do not operate your appliance while the cord is wrapped.
- Avoid the actions which may damage the cord and plug of your appliance. Do not carry by cord; keep the plug to disconnect it from the outlet, but not by pulling its cord. Do not wind its cord around the appliance.
- Always keep the plates of your appliance clean. Do not use the substances such as dust, dirt, forming spray, gel, jelly etc.
- ALWAYS unplug your appliance after using. Take care when your appliance is not in use, or before cleaning or caring, your appliance is unplugged
- Be careful because your apparatus continues to keep the temperature for a certain period of time after its use. Always allow your appliance to cool before cleaning or storing away.
- Use your appliance for its intended purposes as recommended.
WARNING:
- NEVER use your hair styler when in the bath, shower or in the areas in contact with water and when your hands are wet.
- When you do not use your appliance, ALWAYS set the button off position for closing and unplug your appliance. If closing water while your appliance is off but plug, it will cause a danger
SUGGESTION OF USE
-
You can have straight hairs easily and rapidly thanks to your Arzum Superstar Pro Hair Straightening Brush.
-
Use your appliance with the clean, dry and tangle free hairs.
-
Place your appliance on a smooth and heat-resistant surface and attach it to plug.
-
Operate your device by pressing on/off button on the main body. Your appliance will start to operate for 220°C temperature. You can set the desired temperature by using the setting button of your appliance. The device is adjustable from 140°C to 220°C.
-
Use the brush on the healthy hairs only. Do not use it on the sensitive and deformed hairs. Choose the proper temperature setting. Otherwise; you may damage your hair.
-
Low heat setting: For fine, medium-textured or softy waved hair
-
High heat setting: Coarse, curly or hard-tostraighten hair
-
For pale, blonde, bleached or color-treated hair, take extra care and set the temperature to low heat.
-
Hold the appliance at the handle, always at a safe distance from skin and eyes. Use a mirror.
-
Part your hair into approx. 4-5 cm strands. Hold the appliance in the hand. Begin at the roots and lay the prepared strands one at a time between the straightening brush teeth. Repeat until your hair is as straight as you desire.
-
After finishing styling, let your hair cool down.
-
Do not leave your appliance unattended when your appliance is attached in the outlet.
AUTO SHUT-OFF FEATURE
The unit would be auto off after 30 minutes from your last operation. Please press on/off button to switch on the device.
ANTI-STATIC ION GENERATOR
Anti-Static ion generator could get rid of static over the hair and makes the hair more smooth and shine during straightening
TECHNICAL SPECIFICATIONS
100-240V ~ 50/60Hz 60 W
HANDLING AND SHIPMENT
- During handling and shipment, your appliance must be kept in original package in order to prevent damages to its parts.
- Keep at normal position during shipment.
- Do not drop the product when transporting and protect from impacts.
- After delivery of the product, failures and damages that may occur while transporting are not covered by warranty
The product is in compliance with the EEE Directives. WEEE
This product contains recyclable materials that compliance with the WEEE
directives. Do not dispose this product as unsorted municipal waste. Please
contact your local municipality for the nearest collection point.
Manufacturer:
Wenzhou Shi Labo Electrics Co., Ltd.
106, 5th Binhai Road, No. 3 Binhai Avenue, BinHai Economic
Development Area, Wenzhou, 325025 Zhejiang, China
Tel: 0086-577-86008906
Importer:
Arzum Elektrikli Ev Aletleri San. ve Tic. A.Ş.
Otakçılar Caddesi No: 78 Kat: 1 B Blok No: B1b
Eyüp 34050 İstanbul Türkiye
Made in China / Menşei Çin’dir
Tel: +90 212 467 80 80
www.arzum.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>