IKEA HIMLAVALV 3D Mattress for Cot Instructions
- June 4, 2024
- Ikea
Table of Contents
IKEA HIMLAVALV 3D Mattress for Cot
Safety instructions
Important Read Carefully Save for future use
IKEA of Sweden, Box 702, S-343 81 Älmhult Complies with EN 16890:2017+A1:2021.
WARNING
-
Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas
fires, etc. in the near vicinity of the cot (crib and suspended bed). -
Do not use more than one mattress in the cot (crib and suspended bed).
Suitable for cots with inner dimension 60×120 cm. -
Do not use the product if any part is broken; torn or missing and use only spare parts approved by the manufacturer.
-
A compressed product assumes its proper shape and volume within 3-4 days. The material has a distinctive smell that may linger after unpacking. Airing the product will help to eliminate the smell.
Care instruction
The cover is machine washable. It is easier to re-fit the cover again if you
fold the mattress in the middle.
You can easily rinse off the mattress core with lukewarm water. Let the
mattress core air dry and get completely dry before putting the cover on
again.
Advice when drying
Dry without use of a heat source (e.g. hairdryer or radiator).
Child-safe zip
The zip fastener has no tab. This is to prevent children from opening the cover, damaging the mattresses and putting the contents in their mouth. Open and close the zip fastener by pushing, for example, a paper clip through the loop on the slide. Important! Make sure you always remove the paper clip afterwards.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>