SPYKER R28-1824 300 lbs. Push and Tow Commercial Lawn Roller User Manual

SPYKER R28-1824 300 lbs. Push and Tow Commercial Lawn Roller User Manual

OPERATION

• Refer to tractor manual to determine proper towing capacity of your Tractor / Rider.

• GROUND CONDITION IS VITAL TO GOOD LEVELING. Soil should be moist, but not muddy.

• Refer to your Tractor or Riding Mower owner’s manual for proper towing capacity and safe operation of your towing equipment. Towing / Stopping distances will be greatly affected by added weight of roller.

• The plug has an o-ring to create a seal and prevents the drum contents from leaking out.

• Please note that sand may be used in place of water with no risk of freezing.

Using the Handle:

MAINTENANCE

• The key to years of trouble-free service is to keep your Lawn Roller clean and dry.
• Should any rust develop, sand lightly and then paint the area with enamel.
• Periodically check all fasteners for tightness.
• Lubricate bearings monthly with general purpose lithium grease. Using the grease fittings on the bearings, ensure grease fitting is clean prior to lubricating. If used in a very dirty / wet environment, lubricate bearings weekly.
  NOTE: It’s best to rotate axle while lubricating. Bearings are fully greased when grease comes out the bearing seals on the sides.

STORAGE

For longest life:

• Drain the roller

• Leave the plug out

• Grease bearings prior to long term storage.
  Refer to maintenance section.

• If possible, hang the roller when not in use to prevent possibility of developing a flat spot.
  If a flat spot develops on the roller during storage, ensure that the roller is empty then leave out in the sun to warm and roll around to reduce flat area.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>