CYSPO M3 3 In 1 Magnetic Wireless Charging Stand User Manual

CYSPO M3 3 In 1 Magnetic Wireless Charging Stand

Dear users, thank you for purchasing CYSPO products. In order to further understand the product, please read this manual carefully before use. Wish you a pleasant experience.

Product parameters

• Input interface: USB-C
• Input: 9V3A
• Phone output: 15W Max
• TWS output: 5W Max
• Watch output: 3W Max
• Material: Aluminum alloy
• Size: 129.55 108 163.91

Led lights Indicator

• When power connected , the green led lights on for 20 seconds and then off to indicate standby.
• When charging the device, the led lights on for 20 seconds and then off to indicate charging.
• When put mobile phone, watch and earphone all for charging simultaneously, led will light on 20seconds once the last device connected with charger and then off to indicate charging.
• When all devices are fully charged, led still lights off;
• If the wireless charging working abnormal or mismatch the wrong device, the green led lights on blinking.

Instructions for use

• Power source connected to be in standby.
• Put cell Phone on the Magnetic charging area to start wireless charging;
• Put Apple Watch on the charging area to start wireless charging.
• Put TWS earphone on the charging area to start

Abnormal charging Check

• Please confirm your mobile phone with wireless charging function before use;
• Check if mobile phone deviates from the wireless charging right area of the charger;
• Whether a non-metallic protective case is used for charging mobile phones, and the thickness of the case should be less than 4mm;
• When metal material on the charging area, the charger will automatically identify and power off protection.
• When the temperature of the charger is too high, it will automatically start the protection. Please power off the charger firstly and then use it after the charger cool down to normal temperature.

Q & A

• Why is there heating in the charging of wireless charging area when charging the device?
  During the charging process, there will be a certain loss of magnetoelectric conversion, which will be converted into heat, causing the mobile phone and charger to generate heat, which is a normal Physical principle.

Suggestions: When the device is fully charged, disconnect it from charging in time to avoid a long cycle of charging, which may lead to continuous heating of the device and charger; It is recommended to stop running the background software when charging the phone.

Attention

• Use indoor or under dry environment, avoid placing or using in the environment of high temperature, humidity, strong static electricity and strong magnetic field.
• For your safety, please do not plug and unplug electrical appliances with wet hand.
• Avoid infants and children can touch easily.
• Do not use the product if it is contaminated with water or dirty.
• Non-professional personal are not allowed to open and repair this product without authorization.

Contents

• Wireless charger x 1
• Power Adapter x1
• Cable x1
• User manual x1
• Warranty Card x1

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>