CYSPO C3 3-In-1 Wireless Charging Stand User Manual

3-In-1 Wireless Charging Stand
Model: C3
User Manual

Preface

Dear users, thank you for purchasing CYSPO products.ln order to further understand the product, please read this manual carefully before use.Wish you a pleasant experience.

Product Details

Charging stand

1. Magnetic charging output
2. Watch output
3. Earphone output
4.  Indicator lamp
5. USB-C interface

Instructions for use

• Power connected ,the device enters the standby state;
• Put the mobile phone that supports wireless charging on the corresponding charging area for wireless charging;
• Place the Apple Watch in the Magetic charging area to conduct wireless charging;
• Put the earphone that supports wireless charging on the corresponding charging area for wireless charging;

Indicator light description

• When power connected , the green indicator lights up for 2 seconds and then off and enters the standby state;
• When charging the device, the indicator light flashes for three times and then goes off to enter the charging state;
• When the device is fully charged, the indicator light is off;
• When the wireless charging output is abnormal or a foreign body is detected, the green indicator light will continue to blink;

How to solve abnormal charging

• Please confirm whether your mobile phone has wireless charging function before use;
• Check whether the phone deviates from the wireless inductive charging area of the charger;
• Whether a non-metallic protective case is used for charging mobile phones, and the thickness of the protective case is recommended not to exceed 4mm;
• When metal objects touch the charging area, the charger will automatically identify and provide power off protection;
• When the temperature of the charger is too high, it will automatically start the protection.Please unplug the power supply first and use it after the charger recovers the temperature;

Q & A

Q:Why is there heating in the charging of wireless charging inductive products?
A:During the charging process, there will be a certain loss of magnetoelectric conversion, which will be converted into heat, causing the mobile phone and charger to generate heat, which is a normal phenomenon;
Suggestions:

• When the device is fully charged, disconnect it from charging in time to avoid a long cycle of charging, which may lead to continuous heating of the device and charger,
• It is recommended to stop running the background software when charging the phone;

Safety Notes

• Use indoor or under dry environment, avoid placing or using in the environment of high temperature, humidity, strong static electricity and strong magnetic field;
• For your safety, please do not use wet hand plug and unplug electrical appliances;
• Avoid putting it in a place easily accessible to infants and children;
• Do not use the product if it is contaminated with water or dirt;
• Non-professional personnel are not allowed to open and repair without authorization;

Specifications

• Input interface: USB-C
• Input: 9V 3A 12V 2A
• Magnetic charging output: 15W Max
• Watch output: 3W Max
• Earphone output: SW Max
• Size: 141123123MM

Package Contents

• Wireless charger x1
• Cable x1
• User manual x1

FCC
The devices comply with part 15 of the FCC Rules. Operations are subject to the following two conditions : ( 1 ) The devices may not cause harmful interference, and ( 2 ) the devices must accept any interference received, including interference that may cause undesired operation. The equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment do cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, the devices must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>