ERICKHILL RT-100 EMF Meter USER GUIDE
- June 3, 2024
- ERICKHILL
Table of Contents
ERICKHILL RT-100 EMF Meter
SPECIFICATION
- BRAND NAME: ERICKHILL
- PART NUMBER: EMF Meter
- PACKAGE DIMENSIONS: 44 x 6.5 x 2.36 inches
- ITEM WEIGHT: 54 Ounces
- RANGE: 1V/m-1999V/m
- ALARM THRESHOLD: >40V/m
- RESOLUTION: 1V/m
- MAGNETIC FIELD:
- RANGE: 01μT-99.99μT / 0.1 mG – 999.99 mG
- ALARM THRESHOLD: >0.4μT / 4mG
- RESOLUTION: 01μT / 0.1 mG
INTRODUCTION
It has an integrated electromagnetic radiation sensor that, following processing by a control micro-chip, may display the radiation value on the clear LCD digital display. testing the electric field with a unit V/m and the magnetic field with optional units mG/T. The RF value cannot be tested using this emf meter. The screen will turn red, the indicator will flash, and the buzzer will sound an alarm when the test result exceeds the value (0.4T (4mG) or 40V/m). You can turn off the buzzer to save others if you’re testing some calm regions.
Testing the average or maximum reading, and holding the data for a view in one key. The large, backlit LCD is easy to see. automatic power off after five minutes of inactivity. mostly used for ghost hunting, low-frequency household appliance testing, and TV, computer, printer, microwave, refrigerator, and cell tower testing. Errickhill works hard to produce expertly made meters. We give lifelong technical support as well as a 36-month after-sale service. Please feel free to contact us if you have any issues. Our knowledgeable after-sales team will promptly address your issue.
**PRODUCT DIAGRAM
**
**WHAT’S IN THE BOX
**
- 1 x ERICKHILL EMF meter
- 1 x USB cable
- 1 x user’s manual
FEATURES
-
ONE METER WITH TWO USES
Testing the magnetic field and electric field. Auto-alarm when the safe threshold (40V/m or 0.4T/4mG) is exceeded. -
EASY TO OPERATION
Move or take measurements in the field while using one hand to operate. automatically turn off after five minutes of inactivity. -
WIDELY USED
mostly used to test low-frequency home appliances, wiring, computers, TVs, hairdryers, microwave ovens, etc.
HOW TO OPERATE
POWER ON/OFF & DATA HOLD
- Short press this button to turn on the meter.
- After setting up the meter, push this button to lock the reading; to unlock it, simply press it again.
- To switch off the detector, long press this button.
AVERAGE/PEAK VALUE MODE & BUZZER SWITCH
- To switch between average and peak value mode, quickly click this button.
- To activate or deactivate the buzzer, long press this button.
UNIT SWITCH
To change the magnetic field unit between uT and mG, quickly push this button.
LARGE & CLEAR LCD DISPLAY
The screen will turn red and display “Warning” when the magnetic field and electric field are measured to be greater than 40V/m and 0.4T/4mG, respectively.
FAQs
Why is this model so much less money than all the other models?
I thought the same exact thing as you. The unit is so inexpensive I figured I would give it a try and only spend more on a higher model if it did work well. But it appears to work pretty well. I can’t verify it’s accuracy but the readings are around what I expected for the devices I am using it on. I don’t need highly accurate readings so it works for me!
what is the gigahertz range on this?
It does not go up to 5 GHz so it cannot detect the 5G Wi-Fi (widely used). Probably misses many microwave signals too. Lots of electronics radiate at over 3.5GHz. This is a modest device for consumers but not for demanding environments.
What batteries does this use?
Charged, no battery needed.
does it detect temperature?
No it does not detect temperature.
What happens when the internal batteries can no longer be charged? How many years of use can I expect from this device before it becomes trash?
ERICKHILL provide 36 months warranty for the emf meter. Please contact to the seller, they will give you a help.
How did you determine the “danger” levels for V/m and Mg levels? I cannot find anything online to support your level of danger warning
The device sends out alarm sounds when you are at a level of danger. Besides, you can physically feel the difference of a highly emitting device. Manifestations of these are headaches, tiredness, dull mind, etc. Try going to the mountains and feel the difference compared to living in the city.
What about electric blankets? It gives intermittent red electric field readings. Does this mean electric blankets are dangerous?
Yes, it’s dangerous.
can it detect electromagnetic fields from WIFI ?
Yes it will ,find it interesting it will also detect dirty energy such as radioactive waste in old pipes
will this detect Toyota key fob?
No.
Will this detect a faulty electrical panel?
No it does not.
Can it detect Bluetooth radiation?
I tried it on my AirPods It showing numbers
Does this detect temperature? I get conflicting answers when I search for this. Can someone confirm whether it reads temperature or not?
This meter can test magnetic field and electric field, but cannot test temperature.
is this good for reading UV disinfectant lights?
This is used for detecting Electromagnetic Fields. It doesn’t read the light spectrum in that way. It detects radiation emitted from objects and devices.
can this detect infrared light?
No.
Does this get accurate readings for electric meters that read household electricity?
Yes, it does. It measures radiation from any source of AC mains wiring. Remember the big caveat with this meter: do not hold it in your hand or hold the meter in anything metal touching your hand while making measurements. Your body contact will distort the readings higher.
VIDEO
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>