ANDERSON COMPOSITES Carbon Fiber Front Chin Spoiler for 2020-21 Dodge Charger Widebody Installation Guide
- June 3, 2024
- ANDERSON COMPOSITES
Table of Contents
ANDERSON COMPOSITES Carbon Fiber Front Chin Spoiler for 2020-21 Dodge
Charger Widebody
Carbon Fiber Front Chin Spoiler Installation Instructions for 2020-21
Dodge Charger Widebody
Required Tools:
- Cordless drill, drill bits
- Hex wrench
- 1-1/4″ self-tapping screws (not included)
-
Raise front end of car to access lower bumper area. Use appropriate jackstands as needed
-
Use hex wrench to remove the air duct covers on the bottom of spoiler
-
Remove the (2) plastic push-pins in front lower wheel well. Repeat for the other side.
-
Position spoiler onto bumper. Align the (6) holes, near the lip on spoiler and bumper and fasten. We recommend using new, OE style fasteners. (Circled areas)
-
Use the spoiler as guide to drill (9) new holes in the bumper. (Squared areas) Use self-tapping screws and fasten spoiler to bumper.
- We recommend adding automotive double-sided tape to the top of spoiler where it contacts the bumper.
-
Reinstall the air duct covers with hex wrench
-
Fasten the (4) plastic push-pins in the front wheel wells.
AndersonComposites.com
1-626-333-7024, Monday-Friday 9-5:30
PST
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>