ANDERSON COMPOSITES 2020-22 Carbon Fiber Pillar Cover Instruction Manual
- June 11, 2024
- ANDERSON COMPOSITES
Table of Contents
ANDERSON COMPOSITES 2020-22 Carbon Fiber Pillar Cover
The Carbon Fiber Pillar Cover is a replacement part for the OE factory pillar cover of the 2020-22 Chevrolet Corvette. This cover is made of high-quality carbon fiber material, which provides a sleek and stylish look to the car. The installation of this cover is easy and requires only a few tools.
Required Tools
- Phillips screwdriver
Installation Instructions
- Open the door of the car.
- Pull the weatherstrip outward to un-snap the three retaining clips at the end of the pillar.
- Pull the weatherstrip down and let it hang from the top of the pillar.
- Remove the five screws with a Phillips screwdriver along the pillar and one screw at the top of the pillar. You will need to pull the weatherstrip back a bit to access the top screw.
- Remove the OE factory pillar cover.
- Install the carbon fiber pillar cover.
- Reverse the removal process to secure the pillar cover. Repeat the steps for the other pillar cover.
For any further queries or assistance, contact AndersonComposites.com at 1-626-333-7024, Monday-Friday 9-5:30 PST.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>