makita DX12 Dust Collection System Instruction Manual
- June 3, 2024
- Makita
Table of Contents
Dust Collection System
DX12/DX14
Instruction Manual
DX12 Dust Collection System
|
---|---
Be sure to read the instruction manual of the power tool before using the dust
collection system with the power tool.
CAUTION:
- Always be sure that the tool is switched off and battery cartridge is removed before carrying out any work on the tool. Failure to do so may result in serious personal injury from accidental start-up.
- Do not use the tool in wet conditions such as work on concrete surface and the similar.
- Do not point the nozzle at yourself or others when releasing the nozzle by pushing up the guide adjustment button.
- Always follow national laws, regulations and ordinance which prescribe working with materials hazardous to health.
- Wear respiratory protection when emptying the dust case.
NOTICE:
- Before installing the dust collection system, make sure that the attachment points and the power tool itself, particularly the electrical interface on the power tool, are free from dust and foreign matter. After installing the dust collection system, also make sure that it is securely installed.
- Do not touch the filter section when cleaning it.
- Do not use a brush or air duster to clean the filter section. Using a brush or compressed air may damage the filter.
Makita Europe N.V.
Jan-Baptist Vinkstraat 2,
3070 Kortenberg, Belgium
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi 446-8502 Japan
www.makita.com
885753-911
DX12-1
Documents / Resources
|
makita DX12 Dust Collection
System
[pdf] Instruction Manual
DX12, DX14, DX12 Dust Collection System, DX12, Dust Collection System,
Collection System
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>