makita DX10 Dust Collection System Instruction Manual
- June 3, 2024
- Makita
Table of Contents
DX10 Dust Collection System
Instruction Manual
DX10 Dust Collection System
Original instructions
WARNING:
Read the instruction manual of the power tool before using the dust collection
system with the power tool.
CAUTION:
- Make sure that the tool is switched off and unplugged before carrying out any work on the tool. Failure to do so may result in serious personal injury from accidental start-up.
- Always attach the filter to the dust collection system. Failure to do so cause dust inhalation.
- Check that the filter is not damaged. Failure to do so may cause dust inhalation.
- Do not point the nozzle at yourself or others when releasing the nozzle by pushing the guide adjustment button.
- Do not turn the dial on the dust case while the dust case is removed from the dust collection system. Doing so cause dust inhalation.
- Always switch off the tool when turning the dial on the dust case. Turning the dial while the tool is running may result in the loss of control of the tool.
- Wear dust mask when disposing of dust.
- Empty the dust case regularly before the dust case becomes full. Failure to do so may decrease the dust collection performance, and then cause dust inhalation.
- Replace the filter with new one after approximately 200 times of dust fulfillment as a guide. A clogged filter decreases dust collection performance, and then cause dust inhalation.
Read User Manual Online (PDF format)
Loading......