ODYSSEY-X86J4125 Celeron Board with GPIO User Manual

ODYSSEY-X86J4125 Celeron Board with GPIO

Package Contents

• ODYSSEY – X86J4125 v2
• User Manual
• International Power Adapter [Not included in TELEC version!
• SATA Cable
• Antenna x2
• RTC Battery
• Heat Sink [Assembled]
• Cooling Fan [Assembled] [Included in EMMC and Blue version]

Specifications

Processor

| ****

Intel ® Celeron® J4125 Frequency: 2.0-2.7GHz

---|---

Coprocessor

| ****

Raspberry Pi” RP2040 32bit

ARM® Dual-Core Cortex®MO+

Graphics

| Intel• UH □ Graphics 600 Frequency, 250 – 750MHz

Memory

Storage

| LPDDR4 8GB

64GB eMMC V5.1 (in eMMC version)

Wireless

| ****

Wi-Fi 802.11 a/b/g/n/ac • 2.4/5 GHz HT160

Bluetooth® 5.0

Networking

| ****

2 x Intel® 1226-V PC le 2.5GbE LAN

Audio| Microphone+ headphone Combo Connector

Headers

| 28-pin header from Raspberry Pi RP2040

40-pin header compatible with Raspberry Pi

USB

| ****

USB 2.0 Type-A x2

USB 3.1 Type-A xl USB 3.1 Type-C xl

---|---

Video Interfaces

| ****

HDMl2.0a, Up to 4096×2160 la 60Hz 24bpp DP1.2a, Up to 4096×2160 la 60Hz 24bpp

Expansion Slo t s

| ****

M.2[Key B, 2242/22801, SATA Ill, USB2.0, UIM M.2 [Key M, 2242/2280), PCle 2.0 x4

Mic ro SD ca r d Soc ket SIM Card Socket SATAIII

RTC

| ****

JST 1.0 CR2032 3V

TPM

| ****

Built-in JTPM [2.01. optional external TPM 2.0

Power

| ****

DC Jack 5.5/2.lmm or Type-C PD DC Jack input, 12-19V DC

Type-C input, USB PD

Dimensions

| ****

110x110mm

Certifications

| ****

FCC, CE, TELEC, UKCA

Quick Start with ODYSSEY- X86J4125 v2

Before you Start

Make sure you have the following:

1. An external monitor
2. A keyboard and a mouse
3. An HDMI Cable

Attaching External Storage

If you have bought the 64GB EMMC storage version of the ODYSSEY – X86J4125 v2, you can skip this step. However, if you need more storage for your needs, feel free to follow this step.

There are four methods of adding storage to ODYSSEY – X86J4125 v2.

1. Through M.2 PCIE Connector
2. Through M.2 SATA connector
3. Through SATA Connector
4. Through Micro-SD Card Slot

Note
 Only three storage types support installing an operating system inside (M.2 SATA, M.2 PCIE, and SATAI. and the Micro SD Card can only be used as external storage.

Connecting Antennas
Insert the two antennas into the two sockets on the ODYSSEY – X86J4125 v2

Note: One antenna is for Wi-Fi and Bluetooth whereas the second antenna is for strong 5G connectivity

Connecting to a display

1. There are two ways to connect your ODYSSEY – X86J4125 v2 to an external display

Method 1

Method 2

Connecting to a keyboard and a mouse
Connect your favorite keyboard and mouse to the ODYSSEY – X86J4125 v2 through any of the USB connectors

Adding external TPM (Optional)
There is a built-in fTPM (2 O] If you don’t need an external TPM, you can skip this step.

Note: Please ensure TPM is placed in the right direction.

Powering up

1. There are two ways to power up your ODYSSEY – X86J4125 v2.
   Method 1
   Use the 12V/2A power adapter [provided]
   Method 2
   Use a USB Type-C Cable [Supports DP]

2. Press the power button and you will notice the blue power LED turn on

3. Wait a few seconds until it boots into the operating system.

Installing an Operating System

ODYSSEY -X86J4125 v2 supports both Windows and Linux operating systems. If you have bought the non-EMMC version, you could attach external storage by following the previous steps and install your desired operating system by creating a bootable USB drive. Also, if you have bought the EMMC version with windows pre-installed, you could additionally install Linux according to your requirements.

Step 1
Connect your bootable USB drive to one of the USB ports on the ODYSSEY -X86J4125 v2.

Step 2
Press the power button and keep pressing the F7 key on the keyboard until you see the Boot Manager screen.

Step 3
Select the connected USB Drive as the boot drive and press enter

Step 4
Then follow the instructions on the installation screen to complete installing your desired operating system.

Adding 46 Cellular Connectivity

Step 1
Insert a Micro-SIM Card to the bottom layer of the slot.

Step 2
Insert a USB interface 4G module.

Note: This module is a must-have if you want to use the connected SIM card.

Pinout diagram

FAQ

• Q: How can I access the BIOS setup?
  A: Press the Power Button and keep pressing the DEL key until you see the BIOS Setup.

• Q: I cannot connect to Wi-Fi and Bluetooth
  A: Check BIOS settings and enable Wi-Fi and Bluetooth from BIOS.

• Q: ODYSSEY – X86J4125 v2 does “t power up
  A: Make sure you use the 12V/2A power adapter provided in the box and check the connection.

If you have any further questions, please visit forum.seeedstudio.com or send an email to techsupport@seeed.cc.

seeed studio
www.seeedstudio.com www.seeed.cc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>