Tanalaz Technology K3 Wireless Karaoke Speakers Instruction Manual

Tanalaz Technology K3 Wireless Karaoke Speakers

Specifications:

• FCC Compliance: Part 15 of FCC Rules
• Operation subject to FCC regulations
• Generates, uses, and radiates radio frequency energy
• Potential interference with radio communications if not installed and used correctly

Product Usage Instructions

Installation:

Ensure the device is placed in a location that complies with FCC regulations regarding radio frequency emissions. Follow the installation instructions provided in the manual carefully to prevent interference with radio communications.

Power On:

After installation, power on the device using the designated power button or switch. Wait for the device to initialize and be ready for operation.

Operation:

Use the device as intended, keeping in mind the FCC guidelines. Avoid using the device in a manner that may cause interference with radio frequencies.

Maintenance:

Regularly check and maintain the device to ensure it continues to comply with FCC regulations. Clean the device as per the maintenance instructions provided in the manual.

FAQ

Q: What should I do if I experience radio interference with this device?

A: If you experience radio interference, try repositioning the device or contacting customer support for assistance in resolving the issue.

Q: Is it safe to use this device near other electronic equipment?

A: It is recommended to maintain a safe distance from other electronic equipment to prevent potential interference with their operations.

Sound function schematic diagram

Audio button operation

1. Light button: short press the light effect to switch, long press the on/off light
2. Microphone key: short press to cancel the original sound on/off
3. M key: short press to switch Bluetooth, USB, TF card, AUX mode, double-click to force disconnect Bluetooth; (Note: TF card and AUX mode can only be switched if the corresponding device is connected)
4. Key: short press volume down, long press previous song
5. Power button: short press play/pause, long press on/off
6. + key: short press volume plus, long press next song
7. Charging indicator hole, red light is long on when charging, full electric light is off;
8. TYPE-C charging interfac
9. AUX interfacee
10. TF card interface
11. U disk interface

Microphone button operation

12. Power on button: long press to turn on and off; Short press to switch: simple on/off; Double-click to control speaker playback pause;
13. + number key: short press to adjust microphone volume plus, accompaniment volume plus, reverb multiplier plus; Long press to control the next song on the speaker;
14. Number key: short press to adjust the microphone volume reduction, accompaniment volume reduction, reverberation multiplier reduction; Long press to control the previous song on the speaker;
15. Microphone button: short press to switch: KTV mode, professional mode, original sound, loli, monster; Long press to cancel vowel on/off; Double-click the microphone, reverb, accompaniment mode switch;
16. The blue light flashes quickly, the wireless microphone is successfully connected with the blue light is always on, the red light is always on when the wireless microphone is charging, the red light is off when the battery is full, and the red light is flashed twice every 5 seconds when the battery is low;

Bluetooth use

Bluetooth mode

1. Bluetooth connection: boot default to Bluetooth, enter Bluetooth mode or press the “M” button to switch to Bluetooth mode, turn on mobile phone Bluetooth scanning, search for “K3” and click pair, there is a prompt sound after successful connection. When Bluetooth pairing is successful, the Bluetooth indicator lights up steadily.
2. Play music: Open your mobile phone or other Bluetooth device, download and play your favorite songs.
3. After the machine is connected with the mobile phone once, Bluetooth has a memory function, which can be automatically connected or manually connected after booting, and if it needs to be disconnected, it can be disconnected through the Bluetooth device of the mobile phone.

TF card mode
Insert the TF card, the machine will automatically prioritize playback, and there is a prompt tone, when the TF card is inserted, you can switch by pressing the “M” key shortly.

AUX (external audio input) mode

1. Insert the AUX external audio cable, the speaker will automatically play back and prioritize, and there is a prompt sound.
2. When the AUXTF cards are inserted at the same time, you can switch by pressing the “M” key shortly.

Music Light Description
This product has a variety of music effect lighting effects optional, the default is full-color rotating lighting effect when booting, short press the light key to switch a lighting effect, long press the light key on/off the light

Wireless microphone use
The speaker and microphone are turned on at the same time, and the 2.4G wireless signal is automatically paired, at which time the user can start shouting microphone, and at this time, the user can adjust the button to his favorite style according to his hobby. Note: The size of the accompaniment music can only be adjusted when switching to the accompaniment mode; The reverb mode can only adjust the reverberation multiplier when switching to reverb mode;

General situation and treatment

Charging instructions

1. When the battery power is too low, the product will automatically shut down;
2. Use the accessory USB charging cable, connect the USB interface of the standard mobile phone charger to charge, and the charging indicator light is red, indicating that it is charging;
3. Normal charging for 4 hours, after charging, the red light will automatically turn off;
4. Normal continuous use time: about 4 hours;

warning

1. If the machine has smoke or other abnormal phenomena, please contact our after-sales service for processing.
2. If the inside of the machine is exposed to rain or moisture, please put the machine in a ventilated place to dry.
3. Do not bake this machine with high temperature, otherwise it is easy to burn or make the internal components of the machine fail.
4. This product must not be exposed to excessive heat such as sunlight, fire roasting or similar
5.  Do not throw to avoid falling damage.
6. If consumers use power adapters for power supply, they should purchase power adapters that are CCC certified and meet the requirements of the standard.

Product technical parameters

• Pickup: Dynamic microphone
• Speaker impedance: 40
• Charging power supply: DC 5V
• Bluetooth version: 5.0
• Process manufacturing: ABS material process
• Speaker power: 26W+15W
• Frequency range: 100HZ-10KHz
• Maximum sound pressure level: >115dB 1KHz THD<1%
• Reverb Mode: Built-in mix sounds
• Power supply mode: built-in 18650 battery

Product information

Three packs of vouchers
When this product fails, the customer can enjoy the three-guarantee service with a valid ticket and warranty card (the warranty card must be completed immediately when the customer purchases the machine). Matters not covered in this clause shall be implemented with reference to the provisions of the National Three Guarantees Law.

Tips
Improper use of the product, easy to cause the product itself, or may endanger the safety of people and property; If the consumer violates the product manual, improper use, caused personal and property damage, will bear all the consequences, the company will not bear any legal responsibility;

Quality Assurance:
The company’s products follow the national industry implementation standards, which is indeed the company’s product quality problems, and the warranty period is 12 months from the date of purchase. (If the product is damaged due to abnormal use, it is not covered by the warranty)

Product certificate

Warranty card

Note: The company’s products are constantly innovating and are subject to change without notice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>