Kangtai 51252 Garage Door Controller Instruction Manual

Garage Door Controller
Model: 51252
Instruction Manual

PRODUCT STRUCTURE

INSTALLATION SCHEMATIC

INSTALL APP
Install “TuyaSmart” APP

1. You can search for “TuyaSmart” APP in Apple App Store and Google Play, or scan the QR code and install it.
2. Please open the “TuyaSmart” APP and click “Register”.
3. Enter your email address or phone number, and click “Get Verification Code”.
4. Enter the received verification code, the system will create an account for you.
5. If you already have a “TuyaSmart” account, please enter the account number and click “Login”.
   The free APP “TuyaSmart” supports mobile devices above iOS 8.0 or Android 4.4.

https://smartapp.tuya.com/tuyasmart

ADD DEVICE

Connect your product with TuyaSmart

1. Please enable the Wi-Fi, Bluetooth and location functions of your phone.

2. Please start TuyaSmartAPP, click + in the upper right corner, and select Electrician – Garage Door Controller (Wi-Fi).

3. Please select the correct Wi-Fi and enter the password and click Next.
   This product only supports 2.4GHz Wi-Fi network, not 5GHz Wi-Fi network.

4. Please follow the operation instructions of the APP, connect the product to the power supply, and press and hold the button until the indicator light flashes rapidly. Press and hold the button for about 5 seconds.

5. Please follow the operation instructions of the APP to check the flashing mode of the indicator light. And tick the confirmation light flashes quickly and click Next.

6. The system will automatically scan the products that can be added.

7. After successfully scanning to addable products, click Finish.

VOICE CONTROL
Enable our function in the Amazon Alexa APP

1. Select the function in the options bar, then enter our function name TuyaSmart in the search bar and search. Find this entry in the list of search results and click Enable.
2. Enter the account and password you registered in TuyaSmartAPP.
3. When you see the page on the right, it means that your Amazon Alexa account has been successfully associated with the TuyaSmart account.

SECURITY INFORMATION

1. It is recommended that you only use the device in a dry place indoors.
2. The smart plug can only be used within the range of max load power as the instructions.
3. If the product is damaged during transportation, please contact the seller for a replacement.
4. Please use the smart plug correctly. Keep the plug out of the reach of children.
   Do not disassemble the plug by yourself, otherwise it may damage the product or cause safety hazards.

PRODUCT SPECIFICATION

• Model: 51252
• Input voltage: 220V-240V~ 50Hz
• Output voltage: 12V 100mA
• Standby power: ﹤1W
• LED flash: Blue
• Usage scenario: Indoor
• Working temperature: 0 ℃~35 ℃

PRECAUTIONS

1. Instructions for use
The following equipment must not be connected to the remote control socket:

• Equipment beyond technical values (->technical data).
• Do not use the device outdoors, near dripping water and in damp rooms (bathrooms, etc.).

2. Safety Information

• Be sure to turn off the main power switch when installing the equipment.
• For dry rooms only.
• The equipment is plug in a properly installed ground contact socket (220V-240V~ 50Hz).
• Do not open the device. Improper assembly may result in electric shock, short circuit or fire.
• Equipment can be severely affected by structural conditions (eg reinforced concrete) or sources of electrical/electromagnetic interference (fluorescent lights, cordless phones or headsets, TV/monitors, cables, etc.). If necessary, remove the source of interference or maintain an appropriate distance.
• Avoid humidity, extreme temperature, vibration and shock.
• Clean with a soft, slightly damp cloth. Do not use detergents or solvents. Do not immerse in water.
• Do not plug pins or other metal objects into power outlets.
• Danger! Do not place the device on the heater.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

MPE Requirements
To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>