TURBO ENERGY SOLAR INNOVATION Lithium Series 48V 5-1kWh Slim Inverter Solis Installation Guide
- June 3, 2024
- TURBO ENERGY SOLAR INNOVATION
Table of Contents
- TURBO ENERGY SOLAR INNOVATION Lithium Series 48V 5-1kWh Slim Inverter
- QUICK INSTALLATION GUIDE
- 1. Battery configuration
- 2. WIRING Configuration (Solis)
- 3. Inverter configuration
- A. Battery conection
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TURBO ENERGY SOLAR INNOVATION Lithium Series 48V 5-1kWh Slim Inverter
Solis Installation Guide
QUICK INSTALLATION GUIDE
LITHIUM SERIES 48V 5,1kWh Slim +INVERTER SOLIS
1. Battery configuration
Each module has 4 DIP (Dual Inline Package) switches that will be configured differently depending on the number of batteries to be connected.
| Address | Dial switch position | Explain |
|---|---|---|
| #1 | #2 | #3 |
| 1 | ON | OFF |
| 2 | OFF | ON |
| 3 | ON | ON |
| 4 | OFF | OFF |
……
Any changes to the DIPs must be made with the battery turned off.
2. WIRING Configuration (Solis)
The cable needed to make the connection is the RJ45. It is a special cable
that is composed of 8 smaller cables each with a different color
configuration.
It must use a standard pin-to-pin cable with RJ45 connector and connect the
CAN-1 port of the battery (3) with the CAN port of the inverter.
3. Inverter configuration
For the configuration of the inverter, it is necessary to select USER-Define in the battery module within battery select.
It will be checked that the communication is correct if can OK appears on the main screen between the battery and the inverter. Also, on page 3 of Information the BMS Status has to appear as NORMAL
A. Battery conection
Each power cord can carry a maximum of 120 A, so every two batteries a new
cable would need to be connected to the inverter. However, if the inverter is
5 kW with a cable it would be
sufficient to be within the limit of the maximum recommended current.