NAKANISHI Impulse Series Precision Pencil Type Micro Air Grinder User Manual

June 3, 2024
NAKANISHI

Impulse Series Precision Pencil Type Micro Air Grinder

Exclusive Tools

General Parts

Ultrasonic

Air System

Electric System

IMPULSE Series
PRECISION PENCIL TYPE MICRO AIR GRINDER
IMPULSE Series
1 60,000 min-1 NSP-601 2 40,000 min-1 NA45-400 (60°) 3 23,000 min-1 NA45-230 (60°) 4 23,000 min-1 NA90-230 (90°)
CAUTION

p.2-11

4

3

2

1

Precision and high accuracy The smooth rotation without runout or vibration even at high speeds makes it ideal for precise microfabrication.
High power and high torque NAKANISHI air motors are equipped with a special vane motor. The rotation speed is maintained even under fluctuating grinding loads, ensuring stable grinding.
Outstanding noise reduction A silencer is attached to the end of exhaust hose as a standard.
Excellent cost performance The Impulse series offers excellent features at a very reasonable price.

IMPULSE SERIES

Special Rotary Vane Air Motor
A special rotary vane air motor is used at the heart of the handpiece. The motor prevents the decrease in RPM that may occur due to processing load and maintains a stable grinding process.
Exchangeable Collet
Standard Size : ø3.0 mm (CHS-3.0) Optional Collets : CHS Group ø0.8~ø3.175 mm

Twist Free Hose
The grinder and dual hoses (air supply and exhaust) are not fixed, and the hoses swivel freely 360° without twisting. (IM-301)
CAUTION

Electric System

General Parts

60,000 min-1
Set-Up Drawing
· IMPULSE

Straight IMPULSE

Code No.

1034

Model NSP-601

ON / OFF Ring
Easy to switch ON / OFF and to adjust the motor speed, turning right & left.
Built-in Air Filter
Built in air filter in air inlet coupling (the connection to Air Line Kit).
· Air Line Kit AL-H1206 (p.2-15)

· Silencer Use Air Line Kit AL-H1206 or air supply 3 pieces set. (Air Filter, Air Regulator, Lubricator)

· Air Supply 3 Pieces Set

· Compressor

Order by Code No. p.2-12

Exclusive Tools

Ultrasonic

Air System

Exclusive Tools

General Parts

Ultrasonic

Air System

Electric System

IMPULSE Series

PRECISION AIR GRINDER

IMPULSE AIR GRINDER

Straight / 60° IMPULSE

Straight IMPULSE
60,000 min-1

CAUTION

Code No. Model

1034 NSP-601

Standard Size Collet
ø3.0 mm (CHS-3.0)
Optional Collets : CHS Group are shown in page (p.4-4)

60° IMPULSE
40,000 min-1

Code No. Model

1035 NA45-400

Standard Size Collet
ø3.0 mm (CHS-3.0)
Optional Collets : CHS Group are shown in page (p.4-4)

Straight type is ideal for high speed precision grinding. The front part of the NSP-601 model is made of stainless steel ; the back portion of aluminum alloy. The safety design of clamping the chuck up to 29 mm maintains stable rotation of the cutting tool. The air motor is assembled with a special vane design which keeps constant speed under load providing stable grinding and polishing operation.
Angle model’s housing are made of aluminum alloy. Ideal for removing sharp edges at corners and surfaces difficult to reach with straight type handpieces.

Code No.
1034 1035
p.2-13

d
ø17 ø28.6

Specifications Air Consumption : 165 N /min Proper Air Pressure : 0.4~0.6 MPa Inlet Air Hose Length : 1.5 m Eraser Hose Length : 1.2 m
Standard Accessories · Collet ø3.0 mm (CHS-3.0) : 1 pc. · Mounted Point (42423) · Hose (K-213) : 1.5 m · Silencer (K-208) : 1 pc. · Wrench (8 x 5) : 1 pc. · Bar Wrench (K-212) : 1 pc.

D

L

ø23.9

168

ø23.9

39.6

161

L
d L

Weight
165 g 210 g

d
Speed
60,000 min-1 40,000 min-1

D
D
Collet
ø0.8~ø3.175 mm CHS Group (p.4-4)

PRECISION AIR GRINDER
Super Cut IMPULSE
Exclusive Tools p.5-25~30

IMPULSE AIR GRINDER

90° Super Cut IMPULSE
23,000 min-1

Code No. Model

1036 NA90-230

Standard Size Collet
ø3.0 mm (CHS-3.0)
Optional Collets : CHS Group are shown in page (p.4-4)

Standard Accessories

Code No.

Description

42423 Mounted Points

64822 Rubber Pad

64836 Cup Wheel

64837 Cup Wheel

64222 Sand Paper Disk ø31 #120

64225 Sand Paper Disk ø31 #320

64227 Sand Paper Disk ø31 #600

Disks p.5-25~30

Package 1 pc.
1 pc./pack
2 pcs./pack

CAUTION

Exclusive Tools p.5-25~ 30

· With Rubber Pad

· With Polishing Sander · With Mounted Point

Electric System

Please refer to next page.

60° Super Cut IMPULSE
23,000 min-1

Code No. Model

1037 NA45-230

Standard Size Collet
ø3.0 mm (CHS-3.0)
Optional Collets : CHS Group are shown in page (p.4-4)

Standard Accessories

Code No.
42423 64822 64836 64837 64222 64225 64227

Description Mounted Points Rubber Pad Cup Wheel Cup Wheel Sand Paper Disk ø31

120 Sand Paper Disk ø31 #320 Sand Paper Disk ø31 #600

Disks p.5-25~30

Package 1 pc.
1 pc./pack
2 pcs./pack

Exclusive Tools p.5-25~30 · With Rubber Pad · With Polishing Sander · With Mounted Point
Please refer to next page.

General Parts

Exclusive Tools

Code No.
1036 1037

d
ø33.5 ø33.5

Specifications Air Consumption : 165 N /min Proper Air Pressure : 0.4~0.6 MPa Inlet Air Hose Length : 1.5 m Eraser Hose Length : 1.2 m
Standard Accessories · Grindstone Axis (NCH-01) : 1 pc. · Silencer (K-208) : 1 pc. · Wrench (8 x 5) : 1 pc. · Bar Wrench (K-212) : 2 pcs. · Hose (K-213) : 1.5 m · Allen Wrench (1.5 mm) : 1 pc.

D

L

ø23.9

34

156

ø23.9

39.6

163

L D

Weight
190 g 190 g

d

Speed
23,000 min-1 23,000 min-1

Collet
ø0.8~ø3.175 mm CHS Group (p.4-4)
Order by Code No. p.2-14

Ultrasonic

Air System

Exclusive Tools

General Parts

Ultrasonic

Air System

Electric System

IMPULSE Series

Air Line Kit (Automatic Lubricating Device)

Code No.

4506

Model AL-H1206

Standard Accessories
· Air Pressure Gauge · Air Regulator · Air Filter · Lubricator · Air ON-OFF Valve · Piping Hose (K-275) : 2 m · Lubricating Oil (K-211) : 1 pc.

Supplies a smooth air flow and automatic lubrication for long life and stable power.
By adjustment of auto lubrication and air flow, this will help extend the life of air grinder.
Best for grinding and polishing processes, AL-H1206 Air Line Kit has a compact body with a carrying handle and holder to put the IMPULSE in.

Weight : 2.2 kg

Filter Mesh : 5 µm

300(W) x 120(D) x 220(H) mm

CAUTION

Piping Connection Diagram
Use Air Line Kit AL-H1206 or air supply 3 pieces set. (Air Filter, Air Regulator, Lubricator) Coupler is not provided.

Adjusting Dome Filter Regulator

Filter Joint ON-OFF Valve Oil Filler Cap

Air Hose

To Air Compressor
Primary Joint Connector for Air Hose

Lubricator Oil Reservoir

Supply Air / Oil Hose Exhaust Air / Oil Hose
Silencer
Secondary Joint ø6 One-Touch Joint Tool Holder

IMPULSE

Air Tool

IMPULSE Series Spare Parts

Product

Description

29
Grindstone Arbor
(for Cup Wheel & Rubber Pad)

Head Cover

Hose 1.5 m
Silencer Small (w/Metal Fittings)
80
Wrench 8 x 5

Bar Wrench (72 mm)

Allen Wrench (1.5 mm)

Lubricating Oil (70cc)

Lubricating Oil (1)
71
Filter Joint
(for 6 Quick Disconnecting Joint)

ø6 ø6

p.2-15

Code No.
1045 1043 1038 1061 2012 2013
1057 1058 2039

Model
NCH-01

IMPULSE

Fit to

CNA

IMPULSE

K-213

IMPULSE

K-208

IMPULSE

IMPULSE

K-212

IMPULSE

IMPULSE Available in the market

K-211 K-202

For Air Line Kit AL-H1206

FJ-02 For K-213 Hose

The Exchangeable Attachment Chart
Cup Wheel (Pre finishing) Polishing Sander (Abrasive finishing) Rubber Cup Wheel (Abrasive finishing)

Rubber Pad (Abrasive finishing)

Mounted Point (Grinding . Polishing)

· Grindstone Arbor NCH-01
· Cup Wheel · Polishing Sander · Rubber Cup Wheel

· Grindstone Arbor NCH-01
· Rubber Pad (64821, 64822)
· Sand Paper Disk · Diamond Disk · Felt Disk
(p.5-25~30)

Remove Head Cover · Collet ø3.0
CHS Group (p.4-4)
· Mounted Point

CAUTION

Electric System

Rubber Pad
Attach and use various types of polishing discs. (Refer to p.5-25~30)
The elasticity of the rubber makes it ideal for finishing flat to curved surfaces.
5 per pack 23,000 min-1 Max. ø30
ø20 ø11

Cup Wheel

Standard type

Wheel height 206 mm 305 mm Overall height 10 mm

A highly elastic grinding wheel with both grinding and polishing capabilities. It makes the most out of the high power of IMPULSE to machine flat and
curved surfaces with high efficiency and softness. Compared with grinding wheels, there is no bite and the roughness of the
finished surface can be finely adjusted. The use of a special bonding agent reduces clogging and allows the
processing of a wide range of materials including general steel, aluminium, copper, brass and castings.

ø20

ø30

2.8

4

M7 x 0.75
Code No.
64821

Code No.
64822

M7 x 0.75

Flap Sanding Disc
This is a sanding disc for high speed rotation with layered and bonded abrasive cloth.
Compared to a grindstone, it has a softer bite for faster polishing.
The overlapping abrasive cloths provide a new abrasive surface, resulting in excellent durability.
ø30

Convenient Assorted set for trial polishing All grain sizes (5 types x 1 each) Total 5 pieces
Code No. 64850

6

5

M7 x 0.75
12 per pack 23,000 min-1 Max.

M7 x 0.75

Grit

36 #46 #80 #80

Wheel hardness Standard Hard Standard Hard

Code No.20
64830 64831 64832

Code No.30
64835 64836 64837 64838

Thin long-life type

Long-life type

Wheel height 7.5 mm Overall height 10 mm Wheel height 12 mm Overall height 14.5 mm Ideal for tight spaces and detail works. 20% longer Wheel life than Standard type.

ø30 6

ø30 5

5 per pack

M7 x 0.75
23,000 min-1 Max.

Grit

Code No.

80 # 120 # 180 # 240 # 400

64842 64844 64846 64847 64849

7.5

M7 x 0.75

10 per pack 23,000 min-1 Max.

Grit

Wheel hardness Code No.

36 #46 #80

Hard Hard Hard

64861 64862 64863

12

M7 x 0.75

10 per pack 23,000 min-1 Max.

Grit

Wheel hardness Code No.

36 #46 #80

Hard Hard Hard

64865 64866 64867

Order by Code No. p.2-16

General Parts

Exclusive Tools

Ultrasonic

Air System

Exclusive Tools

General Parts

Ultrasonic

Air System

Electric System

IMPULSE Series

Rubber Cup Wheel

Highly elastic rubber grinding wheel with both grinding and polishing properties. Highly efficient machining of flat and curved surfaces with a soft touch utilizing the high power of IMPULSE. Compared with grinding wheels, the impulse wheel does not bite and allows fine adjustment of roughness of finished surfaces. The use of a special bonding agent reduces clogging and enables machining of a wide range of materials, including general steel, aluminum, copper, brass, and castings.
ø30

10 per pack 23,000 min-1 Max.

Grit

60 # 80 # 120 # 180 # 220 # 320

Color
Brown Red Blue Olive Green Brown

Code No.
64851 64852 64853 64854 64855 64856

5 11 M7 0.75

Convenient Assorted set for trial polishing All grain sizes (6 types x 2 each) Total 12 pieces
Code No. 64859

CAUTION

NA90-230

Welded Diamond Cup Wheel

23,000 min -1 ø30
5
6

Diamond abrasive grains are welded to the surface of the cup-shaped base under vacuum and high temperature conditions using a special alloy.

<6 Key Features> Cost saving and ecological benefits Significantly reduced dust generation and improved working environment. Generally, resinoid wheels generate a lot of dust due to their own wear and tear. This wheel does not generate any dust from itself. The large protrusion of diamond abrasive grains gives a sharp cutting edge and a much better cutting power. The special welding method ensures strong diamond grain retention and excellent durability. Greatly reduced sparks and odours during grinding. No wear of the wheel itself and no change in the wheel’s rim speed, resulting in a uniform surface. Longer wheel life, less tool changes and less wasted machining time. Suitable for grinding cast irons, castings, hard rubbers, FRP, stones, concretes and hard materials.

0WFSBMMIFJHIUNN M7 0.75

1 per pack Grit

60/#80

Code No.
64871

Enlarged photo of abrasive grains

p.2-17

PRESTO II

PRESTO II AIR TURBINE GRINDER
ULTRA-HIGH SPEED AIR TURBINE GRINDER
PRESTO II

320,000 min-1

ø1.6 mm Bur Only

An astonishing 320,000 rpm. Smooth cutting without any resistance enables precise cutting and processing.
Clean cutting is possible with the oilless air grinder. No oil sprays out to prevent the workpieces and hands from getting dirty.
Lightweight aluminum body (71 g) with a palm-sized overall length (109 mm). Highprecision processing of minute parts is possible at the same touch when holding a ball-point pen.

PRESTO II Standard Set

Code No.

1125

CAUTION

Model PRII-304S

Electric System

Standard Equipment · Presto Handpiece (PR-304) : 1 pc. · Air Line Kit (PRII-06) : 1 pc. · Foot Controller (AFC-40) : 1 pc. · Handpiece Holder (Z014) : 1 pc.

Specifications

Rotating Speed : 320,000 min-1

Proper Air Pressure : 0.25 MPa

Air Consumption : 40 N/min

Inside Diameter : ø1.6 mm Bur Only

Filter Mesh

: 5 µm

PRESTO Handpiece
320,000 min-1

Code No.

1122

Model

PR-304

Weight : 71 g (w/o Hose)
Standard Accessories · 2 m Hose

ø15.6

108.6
One-touch ring type bur replacement
Ultra-high speed no lube air turbine handpiece ideal for delicate processing application. Built-in dust protection mechanism developed by NAKANISHI ensures long durability. Chip air blows away the cutting powder and cools the cutting tool. Flexible tubing ensures excellent workability reducing fatigue to the operator’s hand for long continuous use.

PRESTO II Spare Parts
Product

Description / Specifications

PRESTO II Air Line Kit (w/o Lubricator / Filter Mesh 5 µm)

PRESTO II Cartridge

Foot Controller
Piping Hose (ø6.0) 2 m Long
Air Turbine Hose (ø5.1) 2 m Long
62
Pin Wrench

Code No. Model
1126 PRII-06 1120 PR-03 1124 AFC-40 2041 K-237 2042 K-238 2002 T-751

ø1.6 mm tools for PRESTO II

Electroplated Diamond Burs

Carbide Cutters

Mounted Points

Rubberized Abrasives

Order by Code No. p.2-18

General Parts

Exclusive Tools

Ultrasonic

Air System

Exclusive Tools

General Parts

Ultrasonic

Air System

Electric System

Precautions for using NAKANISHI Products
For safe usage
Please read operation manuals before using any NAKANISHI product. Please keep the operation manuals on hand so that the user can refer to them at any time.
Caution
Incorrect use of the product, or ignoring `CAUTIONS for safety’ described in the operating manuals may cause fatal or serious bodily injury.

CAUTIONS
CAUTION

Always use safety glasses, masks, face guards for your safety.

Select proper hand tools and for your application.
Select tools carefully considering the performance of the hand tools, work procedure and type / shape of the material.

Do not touch the tools and hand tools when in operation.
Make sure the work area is
neat and there is sufficient
light.

Do not wear loose clothing and/or accessories that may be caught in machinery.
Long hair should be tied prior
to machine operation.

0000**-

4QSBZ

0000””””

Do not operate the products where flammable liquids or gases exist.

0*000***—

Do not leave the work area with the hand tools still in operation.
Confirm that the hand tools hswavitec0000h””c””ionmg pthleetmelyofsf.topped after

Fix the work material firmly in a vise and/or other clamping fixture.
NN
Perform an inspection before use. Clean the inside of the collet and tool shank, chips or fine metals inside the collet could cause tool slippage and result in damage to machinery orSQN bodily injury.

A-3

Fasten the chuck firmly. Make sure the tool is intact in the chuck to avoid tool slippage.

Do not use damaged or broken electric cords and air hoses.

NN

NN

Do not apply high pressure or pry to the tools.
This can break and/or bend the tools. Use the tools within their design limitation. Excessive pressure will decrease the efficiency of your work and cause excessive wear of the tools.

Check the tools carefully

before use.

CAUTION

Confirm that the tools are free of chips, cracks, splits, scratches, lack of bonding, deformation, etc.

Electric System

NNNN SQN

Start at low speed and gradually increase to insure safe work.

This is particularly important

for the cutting

utosoelsofanneNNdNNweltaosotlisc,

large tools

ssuacnhdearsarnuSdQbNbberur sghrintodosltso.ne,

SSQQNN

Store the tools and hand tools in a cool and dry place.
SSQQNN

Stop grinding or polishing immediately whenever unusual sounds, vibrations, or wear are found. Restart the work only after the problem is solved.
Only use attachments, parts, consumable articles and accessories produced by NAKANISHI INC.

NN

The tools should be used by taking care of the overhang and below maximum allowable speed.
The catalogue shows the maximum allowable speed at 10 mm overhang (distance between the face of the collet and the top of the tool shank).

Decrease the speed as shown in the table below, if you are using a longer overhang than 10 mm.

Overhang Less than 10 mm Less than 20 mm Less than 25 mm Less than 50 mm

Maximum allowable speed (min-1) Shown in the catalogue (A) (A) x 0.5 (A) x 0.3 (A) x 0.1

A-4

General Parts

Exclusive Tools

Ultrasonic

Air System

Electric System

How to view NAKANISHI’s Exclusive Tools
How to view NAKANISHI’s Exclusive Tools

5IFQBHFTBSFPSHBOJ[FECZDPEFOVNCFS
TPZPVDBOpOEUIFDPEF OVNCFSZPVOFFECZDIFDLJOHUIFDPEFOVNCFSTQSJOUFE BUUIFUPQPGUIFMFGUBOESJHIUQBHFT

Actual size Illustration (excluding some tools and overall length)
Shank diameter of the tools listed on the facing page The beginning of the Code Numbers listed on the facing page. (The last number listed is found on the right side.)

SHANK DIAMETER
Indicates the shank diameter of various types of shafted tools.
NAKANISHI micro grinders use a collet system to maintain high precision. Please prepare a collet that corresponds to each shank diameter.

11131~
SHANK DIAMETER 1.6
./”OHMF5ZQF

Angle Type Grinder (Electric / Pneumatic) Exclusive Tools for “MINI ANGLE Type”
NAKANISHI Angle Grinders are available with a wide range of tools for a variety of machining operations, from cutting to grinding, polishing and lapping.
Diamond Burs for Deep Hole Chamfering

Grit Size (Mesh Size)
CAUTION
This indicates the size (roughness) of the abrasive grains used in various types of polishing / grinding materials. The larger the number, the smaller (finer) the grit size, and conversely, the smaller the number, the larger (coarser) the grit size (roughness). This is the most significant factor that affects the roughness of the finished surface.

180

Rough Finishing46, 54, 60, 70, 80, 90 Pre Finishing100, 120, 150, 180 Middle Finishing220, 240, 280, 320, 400 Finishing 500, 600, 700, 800, 1000 Extra Fine to
Mirror Finishes 1200, 1500, 1800, 2000, 3000, 4000, 6000, 8000

Quantity in Standard Package

Maximum Allowable Speed
Do not exceed the maximum allowable speed. For safety reasons, always use below the indicated allowable speed. If this is the first time you are using the equipment or tip tool, start with a low speed and gradually increase it to reach the most appropriate speed for use. Conditions may vary depending on the type, shape, overall length, and wear condition of the tip tool, so please work with constant care.

30,000 min -1

General Parts

Ultrasonic

Air Driven

Electrically Driven

1.6 1pc./pack Diamond Burs for Deep Hole Chamfering
Ideal for machining hardened steel, cemented carbide, ceramics, etc.

CAUTION

ø2.5 4

320,000m in -1 #130 30° ø3
5

ø4 6

Diamond abrasive grains

ø1.6 19
11131

20
11132

21
11133

1.6 1pc./pack Diamond Burs for Deep Hole Chamfering
320,000m in -1 #140

60°

90°

ø3 2.7

ø5 4.4

ø3 1.8

ø5 2.8

110°

ø3 1

ø5 2.1

Diamond abrasive grains

ø1.6 20
11151

20
11152

20
11153

20
11154

20
11155

20
11156

Tools of ø1.6 mm shank

Exclusive Tools

The maximum allowable operating speed is for when the overhang is under 10 mm. If the overhang is more than 10 mm, please reduce the speed. For details, please refer to “Precautions for use” on page A-3~4.
Make sure there are no mechanical defects in the equipment prior to each use.

Diamond Burs P.5-31
Photograph of the basic shape

Carbide Burs

Mounted Abrasive Points

Abrasive Rubber Points

1pc./pack

Quantity in Standard Package
A standard package is the minimum shipping unit. This number shows the number of pieces in t’hJOeF#FMU4BO standard package (bag, box, etc.). Please order the number of packages needed for the desired quantity.
Highly e

Maximum Allowable Speed Grit Size

Electric System

“TTPSUFETFUGPS1SF’JOJTIJOH NBSL
(SJUTJ[FT QDTFBDI
5PUBMQDTQFSQBDL
“TTPSUFETFUGPS’JOJTIJOH NBSL
(SJUTJ[FT QDTFBDI
5PUBMQDTQFSQBDL

CAUTION

Ideal for machining metals such as aluminium, stainless steel These belts a

“TTPSUFETFUNNXJEUI “MM(SJUTJ[FT QDTFBDI
5PUBMQDT

Air System

Ultrasonic

20 Overall length Code No. (Order Number)

Excellent wear
Suitable for highly e

“TTPSUFETFUNNXJEUI “MM(SJUTJ[FT QDTFBDI
5PUBMQDT

)BSEUZQF

4PGUUZQF
“TTPSUFETFUNNXJEUI “MM(SJUTJ[FT QDTFBDI
5PUBMQDT

Note : Specifications may change without notice. The color of the tools in the catalog may differ from the actual color due to printing and other factors.

General Parts

Air System

Ultrasonic

General Parts

Exclusive Tools

Exclusive Tools

p.5-3

p.5-4

Exclusive Tools

General Parts

Ultrasonic

Air System

Electric System

64101~
SHANK DIAMETER

Angle Type Grinder (Electric / Pneumatic) Exclusive Tools for “Angle Type”
NAKANISHI Angle Grinders are available with a wide range of tools for a variety of machining operations, from cutting to grinding, polishing and lapping.

5pcs./pack

Special Rubber Pads for Abrasive and Felt Discs
It is used by attaching various types of polishing discs. The elasticity of the rubber makes it ideal for finishing flat and curved surfaces.

CAUTION

20,000 min -1

ø10

ø20

ø30

ø11

100pcs./pack
ø11 ø21 ø31 ø11
p.5-25

ø3.0 35
64101

35
64102

35
64103

Sandpaper Discs (fabric base type)
Ideal for metalworking Excellent durability Use in dry conditions

Grit Size # 60 # 80 # 120 # 180 # 240 # 320 # 400 # 600

ø11 64111 64112 64113 64114 64115 64116 64117 64118

“EIFTJWF#BDL

ø21 64121 64122 64123 64124 64125 64126 64127 64128

ø31 64141 64142 64143 64144 64145 64146 64147 64148

~64274
“OHMF5ZQF

100pcs./pack
ø11 ø21 ø31 ø11
100pcs./pack
ø11 ø21

Sandpaper Discs (paper base type)
Suitable for metal, woodwork, painted surfaces and putty polishing Use in dry conditions

“EIFTJWF#BDL

CAUTION

Electric System

Grit Size # 80 # 120 # 180 # 240 # 320 # 400 # 600

ø11 64201 64202 64203 64204 64205 64206 64207

ø21 64211 64212 64213 64214 64215 64216 64217

ø31 64221 64222 64223 64224 64225 64226 64227

Zirconia Disks
These discs are specially coated with zirconia abrasive grains to provide excellent cutting performance and durability for difficult-to-machine materials.
Ideal for machining metals such as aluminium, stainless steel, copper alloys and brass, which are prone to clogging.

General Parts

Exclusive Tools

“EIFTJWF#BDL ø31

ø11

Grit Size ø11

ø21

ø31

60 64251 64261 64271

80 64252 64262 64272

120 64253 64263 64273

150 64254 64264 64274

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

p.5-26

Ultrasonic

Air System

64331~
SHANK DIAMETER

Angle Type Grinder (Electric / Pneumatic) Exclusive Tools for “Angle Type”
NAKANISHI Angle Grinders are available with a wide range of tools for a variety of machining operations, from cutting to grinding, polishing and lapping.

20pcs./pack
ø11
ø21
CAUTION
ø31 ø11

Felt Discs

Ideal for use in combination with various abrasives (diamond compound, polishing compound) for finish polishing.
Made from 100% high quality sheep’s wool, with moderate elasticity and sufficient durability for repeated polishing operations.
High wool density ensures that abrasives and abrasive grains are held in place and the surface is polished.

Product name

ø11

Felt Discs (1 mm thick) Soft

64331

Felt Discs (2 mm thick) Soft

64335

Sheeted types are available.

“EIFTJWF#BDL

ø21 64332 64336

ø31 64333 64337

~64432
“OHMF5ZQF

5pcs./pack

Rubber grinding wheel disc with shaft (Integrated rubber pad)

The newly developed special rubber holds the abrasive grains with the right amount of hardness and boasts exceptional polishing ability.
The grinding wheel part is integrally moulded into the rubber pad for superior workability.
Highly efficient finishing of flat and curved surfaces with a soft touch.

Finish Polishing ø30

15,000 min -1

Pre Finishing ø30

CAUTION

Electric System

ø3.0 36

Finish Polishing Grit Size Color # 80 Pink # 80 Purple # 120 Blue # 180 Yellow

180 Green # 220 Green # 320 Purple # 500 Orange # 500 Brown

WA abrasive grains GC abrasive grains

64411

64421

64412 64422

64413

64423

64414 64424

64415 64425

64416

64426

36

Pre Finishing (Excellent grindability)

Grit Size

Color

WA abrasive grains

80 Black(Red line) 64431

120 Black(Blue line) 64432

Electric System

Air System

Air System

Ultrasonic

Ultrasonic

General Parts

General Parts

Exclusive Tools

Exclusive Tools

p.5-27

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

p.5-28

Exclusive Tools

General Parts

Ultrasonic

Air System

Electric System

64451~

Angle Type Grinder (Electric / Pneumatic) Exclusive Tools for “Angle Type”
NAKANISHI Angle Grinders are available with a wide range of tools for a variety of machining operations, from cutting to grinding, polishing and lapping.

1pc./pack
ø11 ø21
CAUTION
ø31 ø11
1pc./pack
ø11 ø21 ø31 ø11
p.5-29

Diamond Discs (Full electroplated surface)

The base material is an ultra-thin copper alloy, with diamond abrasive grains electroplated over the entire surface.

The metal base material has good electrodeposition plating conditions and adheres diamond abrasive grains uniformly and most firmly.
Very good sharpness and durability.

“EIFTJWF#BDL

Grit Size ø11

ø21

100 64451 64461

140 64452 64462

200 64453 64463

280 64454 64464

400 64455 64465

600 64456 64466

800 64457 64467

1000 64458 64468

Sheeted types are available.

ø31 64471 64472 64473 64474 64475 64476 64477 64478

Diamond Discs (Dot electroplated type for wet applications)

Nickel alloy pellets with diamond electrodeposition are strongly bonded to the Resin base material.
The dot pattern is characterized by its strong grinding performance. Dot spaces allow chips and grinding fluid to flow smoothly. The resin base material is made of a fiber-filled resin that excels in flexibility
and toughness.

Grit Size Color

ø11

60 Green

64501

120 Black

64502

200 Red

64503

400 Yellow

64504

800 Gray

64505

Sheeted types are available.

“EIFTJWF#BDL

ø21 64511 64512 64513 64514 64515

ø31 64521 64522 64523 64524 64525

~64559
“OHMF5ZQF

3pcs./pack
ø11 ø21
ø31 ø11

Resin Bond Diamond Discs

Diamond abrasive grains are mixed with resin bond and coated on the resin base material.

The resin component provides a uniform and stable finished surface and a soft

grinding feel.

This resin bond type requires dressing only for the first use.

The cutting edges of the abrasive grains are exposed by lightly shaving the

CAUTION

surface with a grindstone or diamond file.

Electric System

Grit Size # 80 # 120 # 180 # 240 # 400 # 800 # 1000 # 2000

ø11 64531 64532 64533 64534 64535 64537 64538 64539

“EIFTJWF#BDL

ø21 64541 64542 64543 64544 64545 64547 64548 64549

ø31 64551 64552 64553 64554 64555 64557 64558 64559

General Parts

Exclusive Tools

For safety reasons, always wear protective equipment such as safety glasses. Use at or below the indicated maximum allowable speed.

p.5-30

Ultrasonic

Air System

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals