PHIATON C450S White Headphone Complete Features

PHIATON C450S White Headphone

Specifications

• BRAND: Phiaton
• COLOR: White
• FORM FACTOR: In-Ear
• SPECIAL FEATURE: Microphone, Noise-Isolating
• INCLUDED COMPONENTS: C450S Earphones, Protective Soft Pouch, 4 x Sets of Silicon Ear Tips (XS, S, M, L)
• DRIVER: 10mm
• PRODUCT DIMENSIONS: 6.3 x 3.6 x 1.9 inches
• ITEM WEIGHT: 1.6 ounces

Introduction

The Dynamically Sporty Extreme Bass Boosting In-Ear Headphones with Microphone (White) from Phaeton provide a dominating full-bodied bass and clean highs, as well as a terrific sound stage throughout the entire frequency range. In addition, the design includes an improved airflow system that enables the 10 mm driver to deliver an ideal three-dimensional response. The inbuilt microphone controls ensure that you never miss a call while enjoying your music.

HOW TO WEAR

Standard in-ear headphones are typically worn with the wire hanging on the front or back, straight down. Since they are in-ear and not earbud headphones, it is best to wear them snugly by tugging on your earlobes as you insert the ear tips to ensure a strong seal inside the ear canal.

HOW TO MAKE HEADPHONES LAST LONG

• After each use, wipe.
• Do not allow anyone else to use your headphones.
• Brush any earwax or dirt off the driver unit gently.
• Don’t forget to bring the jack.
• Don’t put them in your pocket right away.
• Avoid dangling the wires.
• Keep your wiring neat and organized.
• Avoid wrapping your cables tightly in loops.

HOW WIRED HEADPHONES BREAK

The following 7 variables are the most frequent causes of earphones breaking so easily: When removing the earbuds, pulling or straining on the cables. leaving headphones dangling from furniture such as beds, couches, and tables. Twisting your earbuds while you sleep with them in.

HOW TO PROTECT

• Pull The Plug, Not The Cable. Coil The Cable Carefully. Don’t Let The Cord Dangle. Don’t Keep Them Plugged In.
• Make Your Wired Earphones Strong (And Beautiful), Get A Carry Case, and Don’t Sleep With Them On.

HOW TO JOIN A WIRE WITHOUT SOLDERING

Start by preheating your glue gun. Once heated, squeeze a glob of glue onto the twisted wires while holding the glue gun perpendicular to them. The glue should then be swirled around the wires using the glue gun’s nozzle or a pencil. The adhesive bonds better when it is swirled than when it is left in its original state.

Frequently Asked Questions

What causes wired headphones to malfunction?

The most common reasons why earphones and earbuds quit working are cable tension, incorrect wiring from the manufacturer, moisture damage, and damage to the sound drivers. These incidents could result in audio shorts or a total disconnect between the drivers and the audio source.

Why do headphones frequently break?

Because we use headphones so frequently and abuse them, they break very easily. They are exposed to the bottom of your backpack, the sun, the rain, and the backs of aeroplane seats. Therefore, don’t throw away your beloved pair because they malfunction.

How durable are earbuds?

Personally, I find that earbuds generally survive a year with medium to heavy use before developing problems, such as one side of the earphone ceasing to function, the mic ceasing to function (if there), or the wired version pausing and restarting the music on its own when moved.

Can cables for headphones be repaired?

You’ll need an army knife, a lighter, and heat-shrinking tubing to patch and repair headphone wires and cables. You must strip the cable, remove the wire covering, reattach the wires, and apply heat-shrinking tape or electric tape to finish the repair.

Why won’t my headset jack function?

The audio jack on your phone can be clogged with dirt and debris. Blow into the jack or use a can of compressed air to clean it out. Another option is to attempt cleaning out the debris with a cotton swab that has had a few drops of alcohol applied to the end of it.

What purpose does it serve to link wires?

Because electricity needs a medium to go through, connecting wires enables an electrical current to move from one point on a circuit to another.

What does the connection of wires symbol mean?

A straight line is used to symbolize a connecting wire. To link electrically between two sites, it is often formed of copper and has insulation.

What is the name of the headphone hole?

The headphone connectors are inserted here to receive audio signals. A group of electrical connectors known as headphone jacks are frequently utilized for analogue audio signals. Other names for it include phone jack, audio jack, aux input, etc.

How can a live wire be tested?

A voltage tester may be bought and is the safest technique to determine whether a wire is live. They come in a variety of varieties. They will assist you in determining whether a wire is carrying current. You may easily purchase these affordable gadgets online or at your neighborhood hardware store.

Is it okay to have wires outside?

Yes. This is not just a safe practice—best. it’s To prevent the capped wires from unintentionally catching on wallboard, ladders, or other objects, thoroughly tuck them into the junction boxes.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>