CHIAYO NH-3100 Handheld Wireless Microphone User Manual

CHIAYO ITX2 Rechargeable Infrared Handheld/Pendant Microphone

Parts and functions

1. Cartridge screen.

2. Release buttons of pendant holder.

3.  Channel selector. Channel A: 2.08MHz, Channel B: 2.54MHz

4. Bicolor status LED.
   Green: Battery full.
   Red: Battery weak and needs recharging.

5. Power on-off/audio mute switch.

6. Infrared emitter. IR ray radiates from here. Do not block or hold this part of the body.

7. Line input (Φ3.5mm) for external audio input.

8. Volume control.

9. Mic input (Φ2.5mm) for external headset or lavalier microphone.

10. Battery compartment. ITX2 uses only 1 AA battery to operate.

11. Pendant holder.

12. Charging contact, workable with HC-42 (single-unit) / HC-422 (dual-unit) charger.
    Please note: This transmitter has a unique inbuilt safety feature to protect from overcharging the battery. It incorporates a special charging function enabled when 1cm of the PVC cover of the battery’s negative end is removed by 1cm. Any rechargeable batteries used must be used this way for safe charging.

Battery installation/charging
Press and slide off the battery cover and install 1 AA battery. Please make sure the battery type is rechargeable if it’s to be used with the charger. It can be charged without being removed from the transmitter. If the transmitter is to be left unused for a long period of time, please remove the battery until next use.

CHIAYO ELECTRONICS CO., LTD.
Email: sales@chiayo.com.tw
Office: 30, Lane 27, Section 4, Jen-Ai Road, Taipei 10685, Taiwan
Tel: 886-2-27415741｜Fax: 886-2-27525242
Factory: 88, Chung-Hsiao Street 2, Chiayi 60080, Taiwan
Tel: 886-5-2711000｜Fax: 886-5-5767611

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>