ALLE LUX X5 Plus Lamp Instructions

ALLE LUX X5 Plus Lamp

Technical data

• Max power: 120W
• Power supply: DC12V/1.5A (using power adapter)
• Power supply: input voltage: 100-240V 50-60Hz
• output voltage: DC12V/1.5A
• Number of UV LEDs: 36 UV wavelength:
• 365+405nm Model: SUNX5 PLUS
• Certificate No: MOSTCN19081612

MOSTCN19081613

Cures UV/Builder/LED gels.

Device Description:

1. Infrared motion sensor
2. Timer screen
3.  Timer 10s/30s/60s and Low Heat 99s
4. Power supply connector

Operating Instructions

1.  Connect the power supply.
2. Timer can be set to: 10s/30s/60s/99s(99s is Low Heat mode)
3.  You can turn on the unit without using the timer buttons. Put your hand into the lamp, The motion sensor will automatically start the irradiation. The maximum exposure time is 120s.
4. When the unit is counting down the set time, you can press the timer button again, the unit When you press the timer button again, the unit will reset the time and go into standby mode.
5. When the timer button is pressed for 99s, the lamp will go into Low Heat mode. The lamp power will gradually increase.

Precautions:

•  Please read the instruction manual before using the unit.
•  Use only the provided power adapter – using an incompatible power adapter may damage the
• Use only the provided power adaptor – an incompatible power adaptor may damage the unit.
•  Do not get the unit wet or immersed in water or other liquids to avoid
•  damage, short circuit or electric shock.
• Do not use the unit when the timer buttons are not working properly.
•  Disconnect the power supply from the unit when not in use for an extended period of time.
• Do not use an incompatible power adapter as this presents a potential risk.
•  Do not use 600s, as this may shorten the life of the equipment.
•  Do not look directly at the LEDs to avoid eye damage.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>