NOVA 2DR Sliding Wardrobe Instructions

NOVA 2DR Sliding Wardrobe Instructions

NOVA SLIDER

Safety and Care Advice

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

• Keep children and animals away from the work area, small parts could choke if swallowed.

• Make sure you have enough space to layout the parts before starting.

• This product has been constructed to be used in the domestic environment only and not for commercial purposes.

• Assemble the item as close to its final position (in the same room) as possible.

• Assemble on a soft level surface to avoid damaging the unit or your floor.

• We do not recommend the use of power drill/drivers for inserting screws as this could damage the unit. Only use hand screwdrivers.

• Parts of the assembly will be easier with 2 people.

• Dispose of all packaging carefully and responsibly.

Care and maintenance

• Only clean using a damp cloth and mild detergent. Do not use abrasive cleaners.
• Use a dry cloth to clean the product, furniture polish is not recommended.
• From time to time check that there are no loose screws, nuts or bolts. If there are please re-tighten.
• This product should not be discarded with household waste.Take to your local authority waste disposal centre.

Fitting (Shown to scale)

Wardrobe

WARNING!
IN ORDER TO PREWNT OVERTURNING TniS PRODUCT MUST BE USED WEER THE WALL ATTACHMENT OEIACE PROVIDED.

A. 8×35 Wooden Dowel x26

B. Locking Cam x2

C. 16mm Screw x2

D. Metal Dowel x2

E. 50 mm Assembly Bolt x22

F. 13mm Screw x12

G. Hanging Rail Support x4

H. Cam cover x2

I. Key x1

J. Nails x84

K. Foot x5

L. 27mm Screw x4

M. Back Support x10

N. Assembly Bolt Cap x18

O. Wall Fixing Bracket x 2

P. Hanging Rail

Q. Slider Track x 4

R. Handle x 2

S. Top Door Bracket x 4

T. Bottom Door Guide x 4

Tools requied

Phillips screw driver (small & medium)

Flat screw driver  (small & medium)

Hammer

Pencil

Set Squar

Rubber Hammer

Ruler tape measure

Eye protection (when using a hammer or glue)

Wall Fixing Only
Power Drill

Drill bite

Spirite Level

Panels Frame

1. Left side panel (1820 x 500mm)
   

2. Right side panel (1820 x 500mm)
   

3. Vertical Partition Panel (1707 x 400mm)

4. Top Panel (1168 x 499mm)
   

5. Bottom Panel (1168 x 499mm)
   

6. Horizontal Shelf Panel Left  (576 x 399mm)
   

7. Horizontal Shelf (576 x 399mm) Panel Right
   

8. Plinth (1168 x 80mm)
   

9. Door (1699 x 590mm)

10. Back Panel (1737 x 598mm)

WARNING!
IN ORDER TO PREWNT OVERTURNING TniS PRODUCT MUST BE USED WEER THE WALL ATTACHMENT OEIACE PROVIDED

A.8×35 Wooden Dowel x26

B. Looking cam x2

C. 16mm Screw x2

D. Metal Dowel x2

E. 50 mm Assembly Bolt x22

F. 13mm Screw x12

G. Hanging rail support

H. Cam cover x2

I. Key x1

J. Nails x84

K. Foot x5

L. FL 27mm Screw x4

M. Back Support x10

N. Assembly Bolt Cap x18

G. Hanging Rail Support x2

F. 13mm Screw x2

K. Foot x4

2. A.8×35 Wooden Dowel x10

G. Hanging Rail Support x1

F. 13mm Screw x1

K. Foot x1

3. A. 8×35 Wooden Dowel x8

4. A. 8×35 Wooden Dowel x8

Q. Slider Track x 4

5. E. 50 mm Assembly Bolt x2
   

I. Key x1

6. D. Metal Dowel x2

7. B. Loocking cam x2

H. Cam cover x2

8. E. 50 mm Assembly Bolt x2
   

I. Key x1

N. Assembly Bolt Cap x2

10. E. 50 mm Assembly Bolt x2
    

I. Key x1

11. E. 50 mm Assembly Bolt x8
    

I. Key x1

N. Assembly Bolt Cap x8

12. E. 50 mm Assembly Bolt x8

I. Key x1

N. Assembly Bolt Cap x8

15. J. Nails x84

M. Back Support x10

16. O. Wall fixing breacket

C. 16mm screw x2

G. Hanging Rail Support x1

P. Hanging rail x2

F. 13mm Screw x1

WARNING!
IN ORDER TO PREWNT OVERTURNING TniS PRODUCT MUST BE USED WEER THE WALL ATTACHMENT OEIACE PROVIDED.

17. F. 13mm Screw x8

S. Top Door Bracket x 4

T. Bottom Door Guide x 4

18. L. 27mm Screw x2

R. Handle x 1

19. L. 27mm Screw x2

R. Handle x1

Support

Websit; www.argos-support.co.uk
Email Help@ClickSpares.co.uk
Phone;
03701121928
03456402020

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>