boytone C2901 2.1-Inch Multimedia Speaker System User Manual

June 4, 2024
boytone

boytone C2901 2.1-Inch Multimedia Speaker System

boytone C2901 2.1-Inch Multimedia Speaker System

Operation explanation

SPECIFICATIONS

  • Output Power: 26W+12Wx2=50(RMS)
  • Drive Units: 3″ x2 full range magnetically shielded + 5″ subwoofer
  • Frequency Response: Satellites: 120Hz-20KHz
  • Subwoofer:20Hz-170OHz
  • Separation: 240 dB
  • S/N:60dB
  • Distortion: S0.5%(1K, 1W)
  • Power Supply: ~100V-240V 50/60Hz
  • Dimensions: Subwoofer: W160xH277xD302(mm)
  • Satellite: W105xH170xD92(mm)

Features

  • Quality 2.1 speaker system with built-in amplifier
  • Full audio spectrum performances, ideal for your favourite entertainment from Mp3, Mp4, CD/DVD movies and digital playbacks
  • Specially designed woofer cabinet for bass and resolution
  • Comes with remote control and 3.5mm stereo connection

Package contents

  • subwoofer cabinet  1 pc
  • satellite speakers    2 2 pcs
  • remote control       1 pc
  • User manual.         1 pc
  • Audio input cord   1 pc
  • FM ANT               1 pc

Front panel

  1. ST-BY/I
  2. .SOURCE
  3. .VOLUME+
  4. VOLUME-
  5.  TUNING-/
  6. .TUNING+/

How to use the remote control

  1.  ST-BY
  2.  SOURCE
  3.  TONE
  4.  TUNING
  5.  VOL+
  6.  PREVIOUS
  7. VOL-
  8. 0-9
  9.  MUTE
  10.  LED effect
  11.  MEMORY
  12. TUNING+
  13.  PLAY/PAUSE
  14.  NEXT

Steps

  •  Press”ST-BY LED showing Au18′,it is AUX mode playing state.
  • “MUTE” means to activate or deactivate mute.
  • “SOURCE’means you can choose AUX, DVD , USB/SD,FM, BL input mode, at the same time ,the LED will show “Au18’means AUX mode, “Du18” means DVD mode. “87.5’means FM mode, “bL18 means BL mode.
  •  TONE”‘means you can choose “TREBLE” and “BASS” “VOL+/-“means you can increase or decrease volume of ” TREBLE ” or “BASS”.
  •  When enter into FM mode,press”MEMORY”the number on the LED will Blink. this means the machine is under save channel state.You can change the blinking number by pressing”NEXTor “PREV’,pressPLAY/PAUSE”‘you can save the channel into the same number.it will enter into the automatic search channel and automatic save channel when pressing “MEMORY”for 3-5 seconds (noted:the channel which you saved before will be deleted when you press “MEMORY’for 3-5 seconds.
  • When entering into USB/SD mode. “NEXT” means next song; “PREV’means previous song; “PLAY/PAUSE”means play/pause; pressing the number “0-9″on the remote control,you can choose the Corresponding song.
  •  VOL+l- means you can increase or decrease volume.
  • TUNING-“means decrease the frequency of channel selection. Press TUNING- for a long time means decrease the frequency of channel selection continuously
  • “TUNING+” means increasing the frequency of channel selection. Press TUNING+”for a long time means increase the frequency of channel selection continuously.
  • “PLAYIPAUSE”means play/pause for USB/SD.
  • “PREV” means the previous song for USB/SD.
  • “NEXT” means next song for USB/SD.
  •  Press “SOURCE” buttons on the remote to convert to Bluetooth input mode, LED display right bottom start to flashing (2 seconds) to search the Bluetooth device. Turn on your mobile Bluetooth device and search the device name BT SPEAKER, paired them well.When you have successfully paired your mobile to the speaker system, the LED right bottom stop flashing. When start to play your mobile music, the LED flashed every one second.The functions as “PREVIOUS/NEXT”, “PLAY/PAUSE”, can operate via the front panel. On BL mode, when connecting with mobile, press ” HI” for 3 seconds, bluetooth function can be force-disconnected.
  • Press’LED’each time to change LED effect(LED1-LED6), when press”LED” long time turn off LED effect, Depress again to activate LED effect.

Rear panel

  • ANTENNA
  •  AUX/DVD INPUT:
    • Connect to sound sources such as computers, CD Player, MP3, etc.
  •  Output: Connet the satellite speakers.
  •  AC IN: AC Power cord

System connection diagram

  • Connect the audio sources
    • Connect the 3.5 cable to the input of the subwoofer, make sure the red and white color jack to the correspond input of the woofer. Connect the 3.5″ stereo input jack into the output of the audio sources, such as MP3, MP4, walkman, computer etc.
  •  Power on the system,
    • To adjust the master volume to the suitable level. Adjust “VOL” to the suitable to meet your different requirement.

SPEAKER TERMINALS
Connect the left & right channel satellite to 2.1 speaker output terminals

In use please pay attention to the following itemsboytone C2901 2.1-Inch
Multimedia Speaker System 8

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  •  this device may not cause harmful interference, and
  •  this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.

RF Exposure

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body Use only the supplied antenna.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals