Boytone BT-210FB Wireless Bluetooth Stereo User Manual
- June 4, 2024
- boytone
Table of Contents
Boytone BT-210FB Wireless Bluetooth Stereo
FEATURES
- 2500W PMPO
- Analog audio input.
- MP3 playback on USB or SD/MMC.
- Stereo FM radio.
- Buillt-in multi channel power amplifier.
- Connect via Analog to your PC, DVD, TV etc.
- Specially designed woofer cabinet for bass and resolution
- Remote Control
SPECIFICATION
- Output Power: 35W+15Wx2(RMS)
Frequency response
- Satellites: 120Hz-20KHz
- Subwoofer: 20Hz-170Hz
- Distortion: < 0.5% (1K, 1W)
- S/N: >70dB
- Power Supply: ~120V 60Hz
BLUETOOTH SETUP
- SELECT BLUETOOTH MODE USING THE “INPUT” BUTTON ON THE UNIT (5) OR ON THE REMOTE (11).
- YOU WILL SEE “BT” FLASHING ON THE DISPLAY.
- SEARCH FOR DEVICES FROM YOUR PHONE/TABLET/PC/LAPTOP LOOK FOR “BLUETOOTH SPEAKER” IN YOUR SEARCHED DEVICES.
- CONNECT AND PAIR. VOILA!
FM SETUP
- GO TO FM MODE WITH “INPUT/SOURCE” BUTTON AND TUNE TO DESIRED STATION.
- PRESS “MEMORY” BUTTON AND “CHx” WILL BLINK. CLICK NEXT OR PREVIOUS TO SELECT DESIRED CHANNEL.
- CLICK “PLAY/PAUSE” TO SAVE CHANNEL.
- NOTE: TO SCAN, HOLD DOWN “MEMORY” BUTTON
Product Description
-
Volume adjustment +/-
-
Play/Pause/Stand-by
-
Input/Source
-
Volume adjustment +/-
-
Tone: adjust bass/treble
-
Tuning+/Next>>
-
Tuning-/Previous<<
-
STANDBY: turn unit on or off
-
0~9
-
Source/Input
-
INPUT: cycle selection between input USB/SD/FM/AUX/BT.
-
VOLUME+
-
PREV: skip to the previous track
-
TUNING+
-
MUTE
-
PRESET
-
MEMORY
-
PLAY/PAUSE: begin play or pause the USB or SD/MMC. Hold down to scan radio stations.
-
NEXT
-
VOLUME
-
TUNING+
Frequently Asked Questions
How do I connect my Boytone speaker?
USE THE “INPUT” BUTTON ON THE UNIT (5) OR ON THE REMOTE TO SELECT BLUETOOTH MODE (11). THE WORD “BT” WILL FLASH ON THE DISPLAY. SEARCH FOR “BLUETOOTH SPEAKER” IN THE DEVICES YOU SELECTED. LINK AND PAIR.
How does the inside of a Bluetooth speaker work?
Bluetooth uses short-range radio waves in the frequency range of 2.400 to 2.485 GHz to transfer digital data. This information is the digital audio signal from a coupled device in the case of Bluetooth speakers. Bluetooth transmits data using 79 different frequencies between 2.400 and 2.485 GHz.
How do you turn on Boytone?
To activate the speaker, press ST-BY/PLAY/PAUSE. To play or pause in USB/SD/BL mode, long press. Change the input mode in SOURCE. Volume down/up: VOLUME-/+. TONE — Select the TREBLE and BASS by pressing the TONE key. TUNING+/NEXT —- Press once to raise the FM frequency by 0.1M, and long press to activate the semi-automatic radio search.
Can you get good sound from wireless speakers?
Wireless surround sound speakers are promoted as a hassle-free, fashionable, and premium speaker option. They deliver a high-quality sound but are excellent for individuals who prefer a streamlined appearance.
Can you link this system to your TV?
Cable cords are provided for this purpose. You might need to purchase extra hardware if your TV is new and doesn’t use cables.
The speakers are wireless, right?
Two independent speakers that are wired to the main unit are included with the system. A smartphone, tablet, or PC can be wirelessly connected to the main device by Bluetooth or over a wired connection.
It is connected via Bluetooth to a device, but I can’t seem to find it. How can I disable Bluetooth via the stereo?
It came with a controller that had a source button. Press it repeatedly until “BL,” which means Bluetooth, appears. It ought to be listed under BT SPEAKER in your device. A beep will indicate that the pairing was successful.
How long does a bass speaker last?
A subwoofer can last anywhere between 4 and 14 years. The average person should be able to get 10+ years out of their subwoofer if it is well- maintained and not misused.
Where should a bass speaker be placed?
The most typical subwoofer placement reduces localization effects and typically produces the best mixing with the main speakers and centre channel. Bass has no specific direction.
Can I leave my subwoofer on all the time?
Yes, as long as your subwoofer includes an auto standby mode, you can leave it on constantly. Subwoofers that are in standby use less energy and last longer.
Do subwoofers expire?
A good subwoofer can last up to twenty years with proper care. But several factors can affect a subwoofer’s longevity.
How long do subwoofers take to break in?
Some speaker manufacturers will advise a 10 hour break-in period. If you choose to do this at all, that ought to be sufficient time for your subwoofer to settle in.
Can a woofer be used as a subwoofer?
When a low pass crossover is used to restrict the output of a subwoofer to a lower frequency range, the subwoofer can frequently be utilised as a subwoofer. The key point is that it depends on the individual speaker, as is frequently the case.
How do you get deep bass?
Use a low-pass filter to remove the higher frequencies from the bass notes before shaping the sound with the amplitude and filter envelopes for deep bass. We eliminate the higher frequencies using the low-pass filter cutoff. The filter resonance was then experimented with to create additional depth and colour.
How can I improve my bass speaker?
Your subwoofer should be positioned facing outward into the rest of the room and within 8–12 inches of a wall for the best sound quality. Consider locating your subwoofer in the room’s corner for even greater output, since this placement can greatly improve the overall sound.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>