M-gears MG-S01 M-Stick 2 Lite Android Auto Dongle User Manual

MStick 2 Lite
User manualwww.m-gears.comhttps://www.m-gears.com/

What’s in the box

This product is compatible with car displays with Android Auto support only (USB). Please refer to our website for a list of supported vehicles: www.m-gears.com.

• Not supported on commercial vehicles (trucks, large vans, etc.)

Device layout

A – USB port for connection (Type M)
B – Status indicator (Red : In boot / Blue : Boot complete)
C – USB C type port for external devices (Type F)
D – Add-on button

How to use

1. Insert in a USB port
   – Insert the Mstick into the USB port on the car display that supports Android Auto (It takes about 30 seconds to boot up).
   – Android Auto button will be activated on the car display.

• If the Android Auto button is not activated at some car displays, connect a USB Y extension cable to the Mstick to increase the power supply. This product is compatible with car displays with Android Auto support only (USB). Please refer to our website for a list of supported vehicles. 2. Press Android Auto button
  – Press the Android Auto button on your car display.

  3. Run Setup Wizard
     – Follow the setup wizard’s instructions to proceed with the setup.

  4. Connect to the Internet
     – To use various apps and content, the Mstick must be connected to the Internet.
     – Connect to the Internet via Wi-Fi, Please refer to How to Connect to the Internet(p.10).

• To use the Google Play Store, you need a Google account. 5. Set up your preferences
  – In the ‘Mstick Settings( )’, you can set the basic functions of the Mstick, such as using the in-vehicle microphone
  · For more information on setting up the Mstick, please visit our website (www.m-gears.com)

• To update the firmware of the product, please visit our website (www.m-gears.com)

 Android Auto is not activated on the car display
If Android Auto is not activated on the car display, it is usually due to the following reasons: ˙

• The car display does not support Android Auto
  ￫ The Mstick is only available on car displays with Android Auto support. ˙

• The vehicle or car display model is not supported
  ￫ Some or all of the features may not work properly if the car or car display is not a supported model. ˙

• The projection is not set to Android Auto
  ￫ Please check if the projection is correctly set to Android Auto in the car display settings. ˙

• Insufficient power delivery to the Mstick
  ￫ Some vehicles may not supply sufficient power to the Mstick. Please supply additional power using the included USB Y extension cable. ˙

• Wireless Android Auto is enabled on the car display
  ￫ Please disable the wireless Android Auto function on the car display.
  [How to Disable Wireless Android Auto] ① Enter ‘Settings’ on the car display.
  ② Go to ‘Wi-Fi Settings’.
  ③ Uncheck ‘Use Wi-Fi for phone projection’. (Disabled)

• The above method is based on Hyundai/Kia car models, and the disable method may differ depending on the vehicle model or brand.
  If you encounter a problem not listed above or if the problem still occurs after trying the solutions above, please contact our customer service for assistance.

Disconnection occurs

If the Mstick is disconnected from the vehicle, it is usually due to the following reasons. Please try the methods listed below in order to solve the problem.

1. Check the status of the USB extension cable
   ￫ If you are using a USB extension cable, please check if the same problem occurs when plugging the Mstick directly.
   If the problem does not occur when using the Mstick directly, there may be a problem with the USB extension cable.
   Please use the other USB extension cable or plug in the Mstick directly.

2. Check the status of the vehicle’s USB port
   ￫ Please check if the same problem occurs when using Android Auto with an Android smartphone.
   If the same problem occurs when using Android Auto with an Android smartphone, there may be a problem with the vehicle USB port.
   Please check the status of the vehicle’s USB port with the vehicle manufacturer.

3. Reset the device
   ￫ There may be a problem with the Mstick system.
   After resetting your Mstick, check if the problem still occurs.
   [How to reset]
   Mstick Settings > General > Erase all data (Factory reset)
   If you encounter a problem not listed above or if the problem still occurs after trying the solutions above, please contact our customer service for assistance.

Usingn the USB GPS

Connecting an external USB GPS device to a USB port on the Mstick allows you to use the Map and Navigation apps even on vehicles with no GPS support.

• After connecting a USB GPS device, it may take up to 10 minutes to receive GPS information.
• Bluetooth GPS tethering using smartphones is not recommended due to stability and performance issues.

How to use the vehicle’s microphone
When using the vehicle’s microphone, you can use various voice recognition services on the Mstick.
– You can set the vehicle’s microphone in ‘Mstick Settings( )’
– Please select and use the microphone mode suitable for the vehicle you are using according to the description of the ‘Mstick Settings( )’.

• In some models, the media volume may decrease or the vehicle button may not work while the microphone is in use.
•  In some vehicles, the microphone may not work properly. For more information on the microphone mode, please visit our website (www.m-gears.com)

Mstick’s home screen
You can use Mstick’s home screen by customizing it with your favorite apps, widgets, and wallpapers.
The initial home screen is shown below.

Navigation bar
Navigation bar to control the Mstick appears on the left side of the screen.
You can customize the navigation bar in ‘Mstick Settings( )’.
(Exit button) – Exits to the home of the vehicle display.
(Notification button) – Expands and closes the top notification panel.
(Recents button) – A list of recently launched apps appears.
(Home button) – Go to the Mstick home screen.
(Back button) – Moves to the previous screen.

How to connect to the Internet (Android)

1. Activate the smartphone’s hotspot ① Go to ‘Settings’ and move to ‘Connections’.
   ② Tap to ‘Mobile Hotspot and Tethering’.
   ③ Tap to ‘Mobile Hotspot’.
   ④ Set the password.
   ⑤ Turn on the hotspot.

• The above method is based on Samsung Galaxy S10.
• To activate the smartphone’s hotspot, a SIM card with tethering is required. 2. Connect the Mstick to the smartphone’s hotspot
  ① Enter Android ‘Settings( )’.
  ② Move to ‘Network and Internet’.
  ③ Enter Wi-Fi and turn on.
  ④ Select the smartphone at the searched list.
  ⑤ Enter the password of Wi-Fi
• When using the Internet or playing real-time contents, network data from the smartphone connected to the hotspot is used.

How to connect to the Internet (iPhone)

1. Activate the smartphone’s hotspot ① Enter ‘Settings’.
   ② Tap to ‘Personal Hotspot’.
   ③ Set the password and turn on the hotspot.

• To activate the smartphone’s hotspot, a SIM card with tethering is required. 2. Connect the Mstick to the smartphone’s hotspot
  ① Enter Android ‘Settings( )’.
  ② Move to ‘Network and Internet’.
  ③ Enter Wi-Fi and turn on.
  ④ Select the smartphone at the searched list.
  ⑤ Enter the password of Wi-Fi
• When using the Internet or playing real-time contents, please be aware that network data from the smartphone connected to the hotspot is used.

**** Unable to connect to the Internet

If the Mstick can’t connect to the internet, it is usually due to the following reasons: ˙
Problems with the smartphone or the router
￫ There may be problems with the smartphone or the router. Please check if you can connect to the Internet using another smartphone or router.  ˙
Problems with time settings on the Mstick
￫ Please check if the ‘Automatic date and time’ is enabled in the time settings of the Mstick.
[How to enable ‘Automatic date and time’] ➡ Settings > General > Date and time

Automatic date and time > Turn on ˙
Network data exceeds limit
￫ Network data usage through hotspots or tethering may have exceeded the limit. Please check with your network provider customer center. For more information on the microphone mode, please visit our website (www.m-gears.com)

How to connect Bluetooth hands-free
To use the Bluetooth hands-free call function, you must register your smartphone as a Bluetooth hands-free device with the Mstick.

• For Bluetooth hands-free functionality to work correctly,  the smartphone and vehicle must be connected via
  Bluetooth hands-free before the Mstick boots.

• The Mstick doesn’t support Call control (accept/terminate) currently. Please use the call button on the steering wheel or the call UI on the car display.

[How to register a smartphone as a Bluetooth handsfree device with the Mstick]

1. Enter Bluetooth Connection Mode on the Mstick
   ① Enter ‘Mstick Settings( )’.
   ② Go to ‘Bluetooth Hands-free’.
   ③ Go to ‘Hands-free device’.
   ④ Select ‘Add’ button.

• A Bluetooth hands-free connection between the Mstick and the smartphone is required to display call information.
• Depending on the smartphone when you receive or make a call via the smartphone’s UI, call sounds may be output from the smartphone instead of the vehicle speaker. 2. Connect to the Mstick from the smartphone via Bluetooth [Android] ① Enter ‘Settings’ and move to ‘Connections’.
  ② Tap ‘Bluetooth’.
  ③ Turn on Bluetooth and select ‘Mstick2 Lite’ at the device list that can be connected.
  ④ Select OK button in the connection check popup.
  ⑤ Select Confirm button when the contact synchronization popup is displayed.
• The above method is based on Samsung Galaxy S10.
  [iPhone] ① Enter ‘Settings’
  ② Tap to ‘Bluetooth’.
  ③ Turn on Bluetooth and select ‘Mstick2 Lite’ at ‘OTHER DEVICES’.
  ④ Select Pair button in the Bluetooth connection request popup.
  ⑤ Select Allow button when the contact synchronization popup is displayed.

Call sounds are output from the smartphone
If the call sounds are output from the smartphone, it is usually due to the following reasons:

1. Vehicle and smartphone not connected by Bluetooth hands-free
   ￫ If the Mstick boots before the vehicle and smartphone are connected, the vehicle and smartphone will not be connected by Bluetooth hands-free.
   Using the ‘Boot delay’ function, connect the car and smartphone to Bluetooth hands-free before the Mstick is booted.

2. Controlling the call with the UI of the smartphone
   ￫ Depending on the smartphone when you receive or make a call via the smartphone’s UI, call sounds may be output from the smartphone instead of the vehicle speaker.
   Control the call by using the call button on the vehicle’s steering wheel or the call UI on the car display.

• If the smartphone and vehicle are connected by Bluetooth hands-free, you can
  set the call sounds to be output from the vehicle speaker. (Smartphone’s call UI > Bluetooth > Select the car)

  3. The smartphone or the vehicle is not compatible with the Bluetooth hands-free function
     ￫ If the smartphone or the vehicle is not compatible with the Bluetooth handsfree functionality of the Mstick, call-related problems may occur. When using the smartphone or vehicle, please use the ‘Disable Hands-free connection’ function so that the smartphone and the Mstick is not connected by Bluetooth hands-free.
     [How to Disable Hands-Free connection] ➡ Mstick Settings > Bluetooth Hands- free > Disable Hands-free connection > Turn on

How to Update
Via Mgears Updater you can check and update your software to the latest version. When a new software update is available, a notification is displayed at the top of the Mstick. For more information, please visit our website (www.m-gears.com). More detailed FAQ can be found on our website (www.m-gears.com).

Product specification

Caution

• Do not use the product for anything other than its intended purpose.
• Do not touch the product or USB port with wet hands or any other body parts.
• Do not leave the product in a place where there is a risk of overheating.
• Store the product in a dry, moisture-free place.
• Product can be damaged if the temperature is too high or too low.
• Be careful not to damage the product.
• Avoid dropping the product or inflicting any external shock to it.
• Please do not use the Mstick if it’s in a damaged state.
• Do not modify, tear down or repair the product at your discretion.
• Please clean the product with care.
• Please be careful for your children, infants or pets not to suck or bite the product for their safety.
• Do not bring the product close to your eyes or ears or put the device in your mouth.
• If you are using a hearing aid, please carefully review the information related to electromagnetic waves that may affect your hearing aid.
• Do not store the product with metal products such as coins and keys.
• Do not leave the product in a magnetic field.
• While driving, please follow relevant laws at all times.
  The contents of the user manual may vary depending on the software version of the product, the car display or the smartphone, and some changes may be made without user notification.

FCC Statement

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ·
• Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
• Radiation Exposure Statement
• To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm from your body.

www.m-gears.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>