M-gears MG-S03 Mstick3 Android Dongle User Manual
- June 12, 2024
- M-gears
Table of Contents
Android Dongle
User Manual
Cautions
To prevent fire, electric shock, and damage to the product, keep it away from
rain, moisture, or liquids. vase or Do not place other water bottles on top of
the player.
Do not place the product in a bookshelf, cabinet, or other confined space for
good ventilation. To prevent fire or electric shock due to overheating of the
product, provide good ventilation. Keep lit candles and other lit subjects
away from the player. Do not open the case of the product. Only experts can do
this.
Product cleaning
Unplug the power cord before cleaning the product. Use a slightly damp cloth instead of liquid detergent to clean the product. Do not use solvents such as gases as they can damage the case of the product.
Moisture management
Keep the product away from humid places such as basements. Moisture condensation may damage theb product. In this case, turn on the product and the heat of the product may cause moisture.
About User Manual
If necessary, read the user manual carefully and keep the manual in a safe place. Illustrations in this user’s manual may differ from those shown on the screen due to differences in firmware.
What’s in the box
| Item | Count |
|---|---|
| Product | 1 |
| USB Cable | 1 |
| User manual | 1 |
| Name | Mstick3 |
|---|---|
| Model | MG-S03 |
| OS | Android 11 |
| CPU | ARM big.LITTLE A73/A53 Octa core |
| RAM | 4GB LPDDR4 |
| Storage | 64GB eMMC |
| Connectivity | Wi-Fi 2.4G+5GHz |
| Power | DC 5V / 5W |
| Operating Temp. | 0℃ ~ 60℃ |
| Dimensions | 114 x 44 x 15mm |
| Weight | 100 gram |
Connection
PC connection
- Connect the product to your PC.
- Run the viewer app on your PC.
Start
Wi-Fi settings
Click the “Setup” button, click “Wi-Fi” and click Wi-Fi in the upper right
corner.
Install the app
Go to AppInstaller and press OK to enter. You can install software with this
AppInstaller feature. First, download the software of your choice. Click OK to
install the desired software. After installation is complete. The software
icon is displayed in the application menu.
My App.
Go to My App and press OK to enter.
You will see the app icons.
Storage and reset
Go to “Storage and Reset” and press OK to enter.
How to solve the problem
Warning
Under no circumstances should you attempt to repair the Android dongle
yourself. Warranty will be void. To reduce the risk of electric shock, do not
open the case. In the event of a product malfunction, first check the items
listed below before sending the product in for repair. If you cannot solve the
problem by following the hints, please contact your dealer for help.
| Problem | Solution |
|---|---|
| No power | – Check if the USB port is supplying enough power |
| No sound or distortion | – Try adjusting the volume |
– Make sure the speakers are connected correctly.
No sound while playing a movie| – The audio codec may not be supported by
android dongle. You can change to supported audio when playing notes.
– Check the volume.
When the USB flash drive is slow| – It takes a long time to read a large file
or a high-resolution USB flash drive or display it on a TV screen
FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Absorption Rate (SAR) information:
This device meets the government’s requirements for exposure to radio
waves. The guidelines are based onstandards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This
device was tested for typical bodyworn operations with the back of the device
kept 0mm from the body.
To maintain compliance with FCC RF exposure requirements, use accessories that
maintain a appropriate separation distancebetween the user’s body and the
back of the device. The use of belt clips, holsters and similar accessories
should not contain metallic components in its assembly. The use of accessories
that do not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided. Use only the supplied or an approved
antenna.